Racor cónico JIC macho de 74° para manguera R5: serie 16718-R5

Why This R5 Hose Fitting Passes the Compliance Gate
A JIC male 74° cone fitting terminates a textile-reinforced R5 hose with a male JIC 37° flare end, ready to connect to any female JIC cone seat or swivel nut in the circuit. The 16718-R5 series from HENGHUA is a one-piece crimp fitting built to SAE J514 (ISO 8434-2), with a stem geometry engineered for R5-family hose, covering 10 sizes from -04 to -24 with UNF threads from 7/16″-20 to 1-7/8″-12. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this fitting is a compliance gate; for maintenance teams it is the fitting that keeps R5 hose circuits on one reliable termination.
- SAE J514 (ISO 8434-2) JIC male end: UNF thread with a 74° included external cone (37° flare), sealing metal-to-metal into a female cone seat or swivel nut, with no O-ring and no thread sealant required.
- R5-engineered stem: the stem and ferrule geometry is matched to the softer cover and textile reinforcement of R5-family hose, so the crimp grips without crushing the carcass.
- Comprobación de la compuerta del fabricante original (OEM): Conformidad total en cuanto a dimensiones y materiales según la norma SAE J514, con informes de ensayo de materiales (MTR) disponibles para cada lote.
Ventajas principales
- Correct grip on textile hose: the R5 stem profile distributes the ferrule load across the textile carcass, which a standard wire-hose fitting cannot do reliably.
- Resistencia nominal del extremo JIC de hasta 34,5 MPa (5.000 psi): según las normas SAE J514 e ISO 8434-2; cada racor se somete a pruebas hidrostáticas antes de su envío.
- Rango de funcionamiento de -40 °C a +120 °C: matches the continuous rating of R5-family hose and the wider circuit.
- Opciones de ensayo de niebla salina de 96 a 1.000 h: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según el entorno de uso.
Especificaciones técnicas
What Is a JIC Male 74° Cone Fitting for R5 Hose?
A JIC male 74° cone fitting is a crimp-on hose fitting with a male UNF thread and an external 74° cone at the port end. The 74° figure is the included angle of the cone, with each flank 37° from the axis, which is why JIC fittings are also called JIC 37 degree flare fittings. When the male cone is tightened into a female JIC 74° cone seat or swivel nut, the two cone faces contact metal-to-metal and the joint seals without O-rings, washers, or sealant.
The R5 part of the name matters at the hose end, not the port end. R5-family hose (commonly called out to SAE 100R5) uses textile reinforcement instead of steel wire, which makes it flexible, light, and easy to route on mobile equipment, air compressors, and machine tools, with a generous temperature range. Textile hose does not behave like wire hose under the ferrule: the cover is softer, the carcass compresses differently, and the reinforcement must not be cut by the ferrule teeth. The 16718-R5 stem and ferrule profile is engineered for this construction, so the crimp holds the hose firmly without crushing the textile carcass. Confirm your exact hose construction with our engineers when ordering, and the matching crimp data sheet is supplied with the order.
Datos dimensionales y roscas
| Símbolo | Descripción |
|---|---|
| E | JIC male thread (UNF, SAE J514), 7/16″-20 to 1-7/8″-12 |
| A | Overall length of the fitting |
| S1 | Seis aristas en las caras planas del cuerpo del accesorio |
| Guión | Hose inside diameter in 1/16″ increments (-04 to -24) |
| DN | Hose inside diameter in millimetres (6 to 40) |
Full dimension drawings with A and S1 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.
Tabla completa de dimensiones (matriz de referencias) {#by-tamaño-de-rosca}
Read the table with your JIC thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 16718-[thread dash]-hose dash: for example, 16718-08-08(R5) has a 3/4″-16 thread and suits a -08 (12 mm) R5 hose.
| N.º de referencia. | Rosca E (UNF) | Diámetro interior de la manguera DN (mm) | Guión | A (mm) | S1 (mm) |
|---|---|---|---|---|---|
| 16718-04-04(R5) | 7/16″-20 | 6 | 04 | 29 | 12 |
| 16718-06-05(R5) | 9/16″-18 | 8 | 05 | 31 | 17 |
| 16718-06-06(R5) | 9/16″-18 | 10 | 06 | 32 | 17 |
| 16718-08-06(R5) | 3/4″-16 | 10 | 06 | 34.7 | 22 |
| 16718-08-08(R5) | 3/4″-16 | 12 | 08 | 38 | 22 |
| 16718-10-10(R5) | 7/8″-14 | 16 | 10 | 40.5 | 24 |
| 16718-12-12(R5) | 1,1/16″-12 | 20 | 12 | 45.5 | 30 |
| 16718-16-16(R5) | 1,5/16″-12 | 25 | 16 | 44 | 36 |
| 16718-20-20(R5) | 1,5/8″-12 | 32 | 20 | 49.5 | 46 |
| 16718-24-24(R5) | 1,7/8″-12 | 40 | 24 | 52.5 | 50 |
The series covers the R5-hose segment of the JIC male range. Confirm your hose construction and the matching crimp data sheet with our engineers before ordering, and the correct insert depth and crimp outside diameter will be supplied with the order.
Material y tratamiento térmico
| Artículo | Opción estándar | Opción Premium |
|---|---|---|
| Material | Acero al carbono de alta resistencia forjado en frío (20#/35#/45#) | Acero inoxidable 304 o 316L |
| Tratamiento térmico | Carburación y temple, dureza del núcleo: HRC 20-28 | Tratamiento en solución, resistencia estable a la corrosión |
| Superficie | Recubrimiento de zinc trivalente (96 h de prueba de niebla salina) | Zinc-níquel (720 h), Dacromet (1000 h) o pasivado |
| Clase «Thread» | Clase 2A de la UNF, con calibre comprobado | Lo mismo, con inspección mediante el calibre de rosca 100% |
El forjado en frío conserva el sentido de las fibras del acero, lo que aumenta la resistencia a la fatiga ante las pulsaciones de presión. Cada lote sometido a tratamiento térmico se somete a pruebas de dureza y se registra, por lo que el valor de dureza que figura en el certificado de material (MTR) coincide con el de las piezas que recibes.
Presión de trabajo
| Artículo | Valoración |
|---|---|
| Extremo macho JIC (SAE J514 / ISO 8434-2) | Up to 34.5 MPa (5,000 psi) in the standard pressure class; size-dependent, larger dash sizes rated lower per the standard |
| Conjunto engarzado | Governed by the hose; R5-family textile hose in this size range typically carries about 3.5-21 MPa (500-3,000 psi) |
| Prueba de fábrica | Cada accesorio se somete a una prueba de presión 100% antes de su envío. |
Las características técnicas exactas de la combinación de tu número de referencia y manguera se confirman en la ficha técnica y por parte de nuestros ingenieros antes del envío.
Ámbito de funcionamiento de presión y temperatura
| Temperatura | Retención de la presión |
|---|---|
| -40 °C | 100% de presión nominal |
| -20 °C | 100% |
| 0 °C | 100% |
| +20 °C | 100% |
| +40 °C | 100% |
| +60 °C | 100% |
| +80 °C | 100% |
| +100 °C | 100% |
| +120 °C | 100% (la reducción de potencia del sistema viene determinada por la manguera y las juntas de elastómero, no por el racor) |
El cuerpo del racor de acero soporta la presión nominal completa en todo el intervalo de temperaturas. En un conjunto con racor prensado, la presión de trabajo viene determinada por el componente más débil, que suele ser la manguera; utilice la curva de reducción de presión de la manguera para el sistema y el racor no será el elemento limitante.
Selección y pedido
The 16718-R5 series covers the R5-hose segment of JIC hydraulic hose fittings, from -04 to -24, and most orders can be placed directly from the tables below.
Cómo interpretar la tabla de referencias
Find your JIC thread in the E column, then the hose dash size you use. The intersecting row gives the order code, for example a 3/4″-16 thread with a -08 hose gives 16718-08-08(R5). If your combination is not listed, send us both sizes; a custom JIC male fitting for your hose is machined on request.
Tabla de tamaños de roscas JIC
Use this chart to identify any JIC fitting by its thread and to confirm the matching hose dash sizes. It is the same mapping used in the matrix above.
| Hilo de UNF | Raya de hilo | Salpicadero típico de «Hose» |
|---|---|---|
| 7/16″-20 | -04 | -03, -04 |
| 1/2″-20 | -05 | -04, -05, -06 |
| 9/16″-18 | -06 | -04, -05, -06, -08 |
| 3/4″-16 | -08 | -06, -08, -10 |
| 7/8″-14 | -10 | -08, -10, -12 |
| 1,1/16″-12 | -12 | -10, -12, -16 |
| 1,3/16″-12 | -14 | -12 |
| 1,5/16″-12 | -16 | -12, -16, -20 |
| 1,5/8″-12 | -20 | -16, -20 |
| 1,7/8″-12 | -24 | -20, -24 |
| 2,1/2″-12 | -32 | -24, -32 |
Servicio de referencias cruzadas
Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, cone angle, hose size, and hose family, then confirm the exact 16718-R5 equivalent before you place the order. The service covers JIC 37 degree flare fittings, JIC hydraulic hose fittings, and JIC crimp fittings in your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.
Embalaje y logística
| Artículo | Detalle |
|---|---|
| Embalaje estándar | 10 pcs per box (typical), 100 pcs per carton for small sizes |
| Peso bruto | Calculado por talla y confirmado en la factura proforma |
| Marcado | Etiqueta de la caja con el número de pieza, la cantidad y el número de lote para el control de entrada |
| Origen | Fabricado en China, fábrica de HENGHUA |
| Documentos de exportación | Factura comercial, lista de embalaje, MTR, certificado de conformidad |
Guía de montaje y uso
Procedimiento de engastado en cuatro pasos
Crimping an R5 hose fitting follows the same discipline as any JIC crimp fittings job: the crimp parameters decide everything, so never start without the data sheet.
- Corta la manguera en ángulo recto: use a hose cutter, never a hacksaw or an angle grinder. Textile hose frays easily, so a clean cut is even more important than on wire hose.
- Marca la profundidad de inserción: read the insert depth for your hose series from the crimp data sheet and mark the line on the hose cover.
- Lubricar e introducir: apply a thin film of assembly lubricant to the stem and the hose bore, then push the fitting into the hose until the mark meets the ferrule.
- Engarzar y comprobar: select the die per the crimp table, crimp in one continuous stroke, then measure the crimp outside diameter with a caliper and compare with the tolerance.
Connecting the JIC Male End
Clean the 74° external cone and the mating female cone seat or swivel nut with a lint-free cloth. Thread the male end into the female seat by hand until the cone faces touch, then tighten the nut or stud to the torque listed for the thread size. JIC 37 degree flare fittings seal by cone contact alone, which is why the cone face must stay clean and dry. Do not use the cone as a bearing surface for a second wrench, and never apply sealant to the cone face.
Advertencias sobre la instalación
- ❌ Nunca mezcles racores y casquillos de diferentes proveedores, aunque las medidas de la rosca y de la manguera parezcan idénticas. La geometría del vástago, la dureza del casquillo y los parámetros de engarzado difieren, y una unión mixta presentará fugas o se soltará bajo presión.
- ❌ Never use a wire-hose fitting on textile R5 hose, or an R5 fitting on wire hose. The stem profiles are different, and the wrong match damages the carcass or leaks.
- ❌ Never crimp without the matching crimp data sheet. Textile hose tolerates less over-crimping than wire hose before the carcass is damaged.
- ❌ Never recrimp a fitting after a failed attempt, and never reuse a fitting removed from a hose.
- ❌ Never apply sealant to the 74° cone face. It hardens, blocks metal-to-metal contact, and contaminates the circuit.
- ✔ Tras el montaje, somete el circuito a una prueba de presión a 1,5 veces la presión de servicio y comprueba que no haya fugas en todas las uniones.
Personalización OEM y trazabilidad de la calidad
Opciones de personalización
- Personalización del tamaño y la rosca: non-standard thread and hose combinations and special stem lengths machined to your drawing.
- Personalización del tratamiento superficial: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según las condiciones ambientales y las especificaciones de corrosión.
- Marcado láser: su logotipo, el número de pieza y el código de lote marcados con láser en el hexágono para garantizar una trazabilidad completa.
- Opciones de materiales: Acero inoxidable 304/316L para circuitos químicos, marinos y en contacto con alimentos, con certificados de pasivación.
Sistema de calidad y trazabilidad
Cada lote sigue un proceso documentado: recepción del acero con certificado de fábrica → forjado en frío → mecanizado CNC → tratamiento térmico → recubrimiento → inspección de las dimensiones y del calibre de rosca 100% → prueba de presión → marcado láser → embalaje. El número de lote que figura en la caja de cartón remite al lote de materia prima, al registro de tratamiento térmico y al informe de inspección. Se facilitan informes de ensayo de materiales (MTR) con cada pedido previa solicitud, y se pueden tramitar informes de inspección de terceros (BV/SGS) antes del envío.
Preguntas frecuentes
Q: What is a JIC male 74° cone fitting for R5 hose? A: It is a crimp-on hose fitting with a male UNF thread and an external 74° cone, built to SAE J514 / ISO 8434-2, with a stem geometry engineered for R5-family textile-reinforced hose instead of wire-reinforced hose.
Q: What does R5 mean in the part number? A: R5 designates the hose family the stem is engineered for: textile-reinforced hose of the type called out to SAE 100R5, commonly used where flexibility, light weight, and temperature range matter more than maximum pressure.
Q: What is the 74° cone? A: The 74° figure is the included angle of the external cone, with each flank 37° from the axis, the same geometry as a female JIC 74° cone seat or swivel nut. The cone faces seal metal-to-metal, so no O-ring or sealant is used.
Q: What hose sizes does the 16718-R5 series cover? A: The series covers hose from -04 to -24 (DN 6 to 40). Confirm your exact hose construction with our engineers, and the matching crimp data sheet will be supplied with the order.
Q: Can I use a standard JIC wire-hose fitting on R5 hose? A: No. Wire-hose fittings and textile-hose fittings have different stem profiles and ferrule geometry. Using the wrong family damages the textile carcass or leaks under pressure. Always match the fitting series to the hose family.
P: ¿Podéis facilitarme los datos de engaste para mi manguera? R: Sí. Cada pedido incluye la ficha técnica de engaste correspondiente al modelo de su manguera, con la profundidad de inserción, el diámetro exterior del engaste y la selección de matrices. Unos parámetros de engaste correctos son lo que distingue a los racores de engaste JIC fiables de los que sufren fallos prematuros, por lo que los confirmamos antes del envío. Envíenos la serie y la marca de su manguera, y nuestros ingenieros confirmarán los parámetros de engaste antes del envío.
Solicitar un presupuesto
Tell us the JIC thread, the hose dash size, the hose construction, and the annual quantity. Whether you need stock JIC hydraulic hose fittings for distribution or a custom JIC male fitting for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every fitting leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.
Consulta sobre nuestro producto
Somos un proveedor internacional de accesorios y equipos hidráulicos, y ofrecemos una solución integral de abastecimiento a una amplia variedad de sectores. Nuestros productos incluyen: mangueras hidráulicas, racores, adaptadores, acoplamientos rápidos, conectores, protectores de mangueras, equipos hidráulicos y mucho más: todo lo que necesitas para que tus operaciones funcionen sin problemas y de forma eficiente.
Indíquenos sus necesidades mediante el formulario que aparece a continuación. Nuestro equipo le responderá con asesoramiento especializado y un presupuesto personalizado para garantizar el buen funcionamiento de sus operaciones.
- Manguera hidráulica2323 productos
- Manguera hidráulica en espiral con alambre de acero66 productos
- Manguera hidráulica trenzada con alambre de acero1010 productos
- Manguera hidráulica reforzada con tejido33 productos
- Manguera hidráulica termoplástica33 productos
- Manguera industrial7575 productos
- Manguera de aire99 productos
- Manguera de agua1111 productos
- Manguera de aceite1616 productos
- Manguera para productos químicos66 productos
- Manguera compuesta1616 productos
- Manguera compuesta química33 productos
- Manguera compuesta para uso marítimo55 productos
- Manguera compuesta para petróleo55 productos
- Manguera compuesta para altas temperaturas11 producto
- Manguera compuesta de PTFE11 producto
- Manguera compuesta criogénica11 producto
- Manguera de vapor33 productos
- Manguera multiusos22 productos
- Mangueras para alimentos y bebidas44 productos
- Manguera para hormigón44 productos
- Manguera para cemento22 productos
- Manguera para la manipulación de materiales1111 productos
- Manguera para dragado44 productos
- Accesorios hidráulicos166166 productos
- Accesorios reutilizables para mangueras66 productos
- Racores para mangueras sin casquillo88 productos
- Accesorios hidráulicos JIC1616 productos
- Racores hidráulicos métricos4141 productos
- Racores hidráulicos NPT66 productos
- Racores hidráulicos BSP2626 productos
- Racores hidráulicos SAE3030 productos
- Racores hidráulicos tipo banjo44 productos
- Racores hidráulicos ORFS1111 productos
- Virola1111 productos
- Accesorios con brida2626 productos
- Accesorios de una sola pieza2424 productos
- Adaptadores hidráulicos149149 productos




