JIC Female Swivel Nut Fitting: 26713W Series

jic female swivel nut sae j514 26713w series spec

Why This JIC Female Swivel Nut Fitting Passes the Compliance Gate

A JIC female swivel nut fitting terminates a large-bore hydraulic hose with a female UNF thread whose nut rotates freely, so the assembly can be oriented and tightened without twisting the hose. The 26713W series from HENGHUA is a one-piece crimp fitting built to SAE J514 (ISO 8434-2), covering 5 sizes from -12 to -32 with UNF threads from 1-1/16″-12 to 2-1/2″-12. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this fitting is a compliance gate; for maintenance teams it is the fitting that makes large hose installation a one-person job.

  • SAE J514 (ISO 8434-2) JIC female end: UNF thread with an internal 74° cone seat (37° flare), sealing metal-to-metal against a male flare stud, with no O-ring and no thread sealant required.
  • Swivel nut design: the female nut rotates freely on the body, so the nut can be threaded onto a male stud while the hose and body stay still.
  • Comprobación de la compuerta del fabricante original (OEM): Conformidad total en cuanto a dimensiones y materiales según la norma SAE J514, con informes de ensayo de materiales (MTR) disponibles para cada lote.

Ventajas principales

  1. No hose twist during installation: the swivel nut turns independently of the body, so tightening never winds the hose, which matters most on stiff large-bore lines.
  2. Resistencia nominal del extremo JIC de hasta 34,5 MPa (5.000 psi): según las normas SAE J514 e ISO 8434-2; cada racor se somete a pruebas hidrostáticas antes de su envío.
  3. Rango de funcionamiento de -40 °C a +120 °C: probado en equipos móviles de arranque en frío y en circuitos industriales en caliente sin que se haya producido degradación de las juntas.
  4. Opciones de ensayo de niebla salina de 96 a 1.000 h: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según el entorno de uso.

Especificaciones técnicas

What Is a JIC Female Swivel Nut Fitting?

A JIC female swivel nut fitting is a crimp-on hose fitting with a female UNF thread and an internal 74° cone seat on the port end, where the nut is a separate piece that rotates freely around the body. The 74° figure is the included angle of the cone, with each flank 37° from the axis, which is why JIC fittings are also called JIC 37 degree flare fittings. When a male JIC 37° flare stud is tightened into the seat, the two cone faces contact metal-to-metal and the joint seals without O-rings, washers, or sealant.

The swivel nut exists for one practical reason: hose twist. On a fixed female fitting, turning the nut onto a male stud also turns the fitting body, which winds the hose behind it. On large-bore lines from -12 to -32, the hose is stiff and heavy, the twist is hard to remove, and a wound hose works against itself at every pressure pulse. With the swivel nut, you hold the body, thread the nut onto the male stud, and tighten with a wrench while the hose stays perfectly still. The hose can also be oriented after the nut is started, because the nut spins while the body does not.

Datos dimensionales y roscas

Símbolo Descripción
E JIC female thread (UNF, SAE J514), 1-1/16″-12 to 2-1/2″-12
A Overall length from the nut end to the hose-end face
C Thickness of the swivel nut
S2 Hex across flats of the swivel nut
Guión Hose inside diameter in 1/16″ increments (-12 to -32)
DN Hose inside diameter in millimetres (20 to 50)

Full dimension drawings with A, C, and S2 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.

Tabla completa de dimensiones (matriz de referencias) {#by-tamaño-de-rosca}

Read the table with your JIC thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 26713-[thread dash]-[hose dash]W: for example, 26713-16-16W has a 1-5/16″-12 thread and suits a -16 (25 mm) hose. The W designates the swivel nut assembly.

N.º de referencia. Rosca E (UNF) Diámetro interior de la manguera DN (mm) Guión A (mm) C (mm) S2 (mm)
26713-12-12W 1,1/16″-12 20 12 26.5 15 32
26713-16-16W 1,5/16″-12 25 16 29.4 16 41
26713-20-20W 1,5/8″-12 32 20 32.3 17 50
26713-24-24W 1,7/8″-12 40 24 35.2 20 60
26713-32-32W 2,1/2″-12 50 32 34.5 23.5 75

The series covers the large-bore segment of the JIC female range. Confirm your hose construction and the matching crimp data sheet with our engineers before ordering, and the correct insert depth and crimp outside diameter will be supplied with the order.

Material y tratamiento térmico

Artículo Opción estándar Opción Premium
Material Acero al carbono de alta resistencia forjado en frío (20#/35#/45#) Acero inoxidable 304 o 316L
Tratamiento térmico Carburación y temple, dureza del núcleo: HRC 20-28 Tratamiento en solución, resistencia estable a la corrosión
Superficie Recubrimiento de zinc trivalente (96 h de prueba de niebla salina) Zinc-níquel (720 h), Dacromet (1000 h) o pasivado
Clase «Thread» Clase 2A de la UNF, con calibre comprobado Lo mismo, con inspección mediante el calibre de rosca 100%

Cold forging preserves the grain flow of the steel, which raises fatigue resistance under pressure pulsation. Each heat-treatment batch is hardness-tested and recorded, so the hardness number on the MTR matches the parts you receive. The swivel nut is machined and tested for free rotation before the fitting is released to packing.

Presión de trabajo

Artículo Valoración
JIC female end (SAE J514 / ISO 8434-2) Up to 34.5 MPa (5,000 psi) in the standard pressure class; size-dependent, larger dash sizes rated lower per the standard
Conjunto engarzado Governed by the hose; at these sizes braided and spiral constructions typically carry 8-35 MPa (1,160-5,080 psi)
Prueba de fábrica Cada accesorio se somete a una prueba de presión 100% antes de su envío.

Las características técnicas exactas de la combinación de tu número de referencia y manguera se confirman en la ficha técnica y por parte de nuestros ingenieros antes del envío.

Ámbito de funcionamiento de presión y temperatura

Temperatura Retención de la presión
-40 °C 100% de presión nominal
-20 °C 100%
0 °C 100%
+20 °C 100%
+40 °C 100%
+60 °C 100%
+80 °C 100%
+100 °C 100%
+120 °C 100% (la reducción de potencia del sistema viene determinada por la manguera y las juntas de elastómero, no por el racor)

El cuerpo del racor de acero soporta la presión nominal completa en todo el intervalo de temperaturas. En un conjunto con racor prensado, la presión de trabajo viene determinada por el componente más débil, que suele ser la manguera; utilice la curva de reducción de presión de la manguera para el sistema y el racor no será el elemento limitante.

Selección y pedido

The 26713W series covers the large-bore segment of JIC hydraulic hose fittings, from -12 to -32, and most orders can be placed directly from the tables below.

Cómo interpretar la tabla de referencias

Find your JIC thread in the E column, then the hose dash size you use. The intersecting row gives the order code, for example a 1-5/16″-12 thread with a -16 hose gives 26713-16-16W. If your combination is not listed, send us both sizes; a custom swivel nut fitting is machined on request.

Tabla de tamaños de roscas JIC

Use this chart to identify any JIC fitting by its thread and to confirm the matching hose dash sizes. It is the same mapping used in the matrix above.

Hilo de UNF Raya de hilo Salpicadero típico de «Hose»
7/16″-20 -04 -03, -04
1/2″-20 -05 -04, -05, -06
9/16″-18 -06 -04, -05, -06, -08
3/4″-16 -08 -06, -08, -10
7/8″-14 -10 -08, -10, -12
1,1/16″-12 -12 -10, -12, -16
1,3/16″-12 -14 -12
1,5/16″-12 -16 -12, -16, -20
1,5/8″-12 -20 -16, -20
1,7/8″-12 -24 -20, -24
2,1/2″-12 -32 -24, -32

Servicio de referencias cruzadas

Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, cone angle, hose size, and nut configuration, then confirm the exact 26713W equivalent before you place the order. The service covers JIC 37 degree flare fittings, JIC hydraulic hose fittings, and JIC crimp fittings in your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.

Embalaje y logística

Artículo Detalle
Embalaje estándar 5 pcs per box (large sizes), 20 pcs per carton (typical)
Peso bruto Calculado por talla y confirmado en la factura proforma
Marcado Etiqueta de la caja con el número de pieza, la cantidad y el número de lote para el control de entrada
Origen Fabricado en China, fábrica de HENGHUA
Documentos de exportación Factura comercial, lista de embalaje, MTR, certificado de conformidad

Guía de montaje y uso

Procedimiento de engastado en cuatro pasos

Crimping a swivel nut fitting follows the same discipline as any JIC crimp fittings job: the crimp parameters decide everything, so never start without the data sheet.

  1. Corta la manguera en ángulo recto: use a hose cutter, never a hacksaw or an angle grinder. A square, clean end is the precondition for a uniform ferrule grip on large-bore hose.
  2. Marca la profundidad de inserción: read the insert depth for your hose series from the crimp data sheet and mark the line on the hose cover.
  3. Lubricar e introducir: apply a thin film of assembly lubricant to the stem and the hose bore, then push the fitting into the hose until the mark meets the ferrule.
  4. Engarzar y comprobar: select the die per the crimp table, crimp in one continuous stroke, then measure the crimp outside diameter with a caliper and compare with the tolerance.

Connecting the JIC Female Swivel End

Clean the internal 74° cone seat and the mating male 37° flare stud with a lint-free cloth. Confirm the swivel nut turns freely on the body before assembly. Hold the fitting body with one hand, thread the nut onto the male stud by hand until the cone faces touch, then tighten the nut to the torque listed for the thread size while holding the body still. JIC 37 degree flare fittings seal by cone contact alone, which is why both cone faces must stay clean and dry. The hose stays in position through the whole tightening sequence, which is exactly what the swivel nut is built for.

Advertencias sobre la instalación

  • ❌ Nunca mezcles racores y casquillos de diferentes proveedores, aunque las medidas de la rosca y de la manguera parezcan idénticas. La geometría del vástago, la dureza del casquillo y los parámetros de engarzado difieren, y una unión mixta presentará fugas o se soltará bajo presión.
  • ❌ Never crimp without the matching crimp data sheet. An under-crimped joint weeps, and an over-crimped joint damages the hose reinforcement.
  • ❌ Never recrimp a fitting after a failed attempt, and never reuse a fitting removed from a hose.
  • ❌ Never apply sealant to the 74° cone seat or the male flare cone. It hardens, blocks metal-to-metal contact, and contaminates the circuit.
  • ❌ Never force the swivel nut with a pipe extension or impact wrench; overtightening distorts the cone seat and damages the nut.
  • ✔ Tras el montaje, somete el circuito a una prueba de presión a 1,5 veces la presión de servicio y comprueba que no haya fugas en todas las uniones.

Personalización OEM y trazabilidad de la calidad

Opciones de personalización

  • Personalización del tamaño y la rosca: non-standard thread and hose combinations, special stem lengths, and custom nut configurations machined to your drawing.
  • Personalización del tratamiento superficial: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según las condiciones ambientales y las especificaciones de corrosión.
  • Marcado láser: su logotipo, el número de pieza y el código de lote marcados con láser en el hexágono para garantizar una trazabilidad completa.
  • Opciones de materiales: Acero inoxidable 304/316L para circuitos químicos, marinos y en contacto con alimentos, con certificados de pasivación.

Sistema de calidad y trazabilidad

Every batch follows a documented flow: incoming steel with mill certificate → cold forging → CNC machining → heat treatment → plating → 100% thread gauge and dimension inspection → swivel nut rotation test → pressure test → laser marking → packing. The batch number on the carton links back to the raw material lot, the heat-treatment record, and the inspection report. Material test reports (MTR) are provided with every order on request, and third-party inspection reports (BV/SGS) can be arranged before shipment.

Preguntas frecuentes

Q: What is a JIC female swivel nut fitting? A: It is a crimp-on hose fitting with a female UNF thread and an internal 74° cone seat, built to SAE J514 / ISO 8434-2, where the nut rotates freely on the body so the hose does not twist during installation.

Q: When should I use a swivel nut instead of a fixed female fitting? A: Use a swivel nut on large or stiff hose where turning a fixed nut would wind the hose, and where the hose must stay oriented while the connection is tightened. On small flexible lines a fixed fitting is usually sufficient; on -12 to -32 lines the swivel is the practical choice.

Q: What is the 74° cone seat? A: The 74° figure is the included angle of the internal cone, with each flank 37° from the axis, the same geometry as a male JIC 37° flare stud. The two cone faces seal metal-to-metal, so no O-ring or sealant is used.

Q: What hose sizes does the 26713W series cover? A: The series covers large-bore hose from -12 to -32 (DN 20 to 50). Confirm your hose construction with our engineers, and the matching crimp data sheet will be supplied with the order.

Q: Does the female end need sealant or an O-ring? A: No. The 74° cone seat seals metal-to-metal against a male JIC 37° flare stud. Keep both cone faces clean and dry, and tighten to the listed torque. An O-ring is used only on ORFS fittings, which have a flat-face seal geometry.

P: ¿Podéis facilitarme los datos de engaste para mi manguera? R: Sí. Cada pedido incluye la ficha técnica de engaste correspondiente al modelo de su manguera, con la profundidad de inserción, el diámetro exterior del engaste y la selección de matrices. Unos parámetros de engaste correctos son lo que distingue a los racores de engaste JIC fiables de los que sufren fallos prematuros, por lo que los confirmamos antes del envío. Envíenos la serie y la marca de su manguera, y nuestros ingenieros confirmarán los parámetros de engaste antes del envío.

Solicitar un presupuesto

Tell us the JIC thread, the hose dash size, the hose construction, and the annual quantity. Whether you need stock JIC hydraulic hose fittings for distribution or a custom swivel nut fitting for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every fitting leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.

Consulta sobre nuestro producto

Somos un proveedor internacional de accesorios y equipos hidráulicos, y ofrecemos una solución integral de abastecimiento a una amplia variedad de sectores. Nuestros productos incluyen: mangueras hidráulicas, racores, adaptadores, acoplamientos rápidos, conectores, protectores de mangueras, equipos hidráulicos y mucho más: todo lo que necesitas para que tus operaciones funcionen sin problemas y de forma eficiente.
Indíquenos sus necesidades mediante el formulario que aparece a continuación. Nuestro equipo le responderá con asesoramiento especializado y un presupuesto personalizado para garantizar el buen funcionamiento de sus operaciones.