JIC Female 90° Elbow: 26791-RW Series

jic female 90 elbow sae j514 26791 rw fitting spec\

jic female 90 degree elbow sae j514 26791 series spec

Why This JIC Female 90° Elbow Passes the Compliance Gate

A JIC female 90° elbow terminates a braided hydraulic hose with a right-angle turn and connects it to a male JIC 37° flare stud through a female 74° cone seat. The 26791-RW series from HENGHUA is a one-piece crimp elbow built to SAE J514 (ISO 8434-2), covering 27 sizes from -03 to -32 with UNF threads from 7/16″-20 to 2-1/2″-12. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this elbow is a compliance gate; for maintenance teams it is the fitting that solves right-angle port access without forcing the hose into a damaging bend.

  • SAE J514 (ISO 8434-2) JIC female end: UNF thread with an internal 74° cone seat (37° flare), sealing metal-to-metal against a male flare stud, with no O-ring and no thread sealant required.
  • One-piece crimp elbow: machined stem and ferrule seat matched to braided hose constructions; the spiral-hose version carries the 26792 series number.
  • Comprobación de la compuerta del fabricante original (OEM): Conformidad total en cuanto a dimensiones y materiales según la norma SAE J514, con informes de ensayo de materiales (MTR) disponibles para cada lote.

Ventajas principales

  1. Resistencia nominal del extremo JIC de hasta 34,5 MPa (5.000 psi): per SAE J514 / ISO 8434-2, with every elbow hydrostatically tested before shipment.
  2. Rango de funcionamiento de -40 °C a +120 °C: probado en equipos móviles de arranque en frío y en circuitos industriales en caliente sin que se haya producido degradación de las juntas.
  3. Right-angle port access: the 90° turn lets a hose reach a side-facing port in tight spaces, so the line is not bent sharply at the connection point.
  4. Opciones de ensayo de niebla salina de 96 a 1.000 h: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según el entorno de uso.

Especificaciones técnicas

What Is a JIC Female 90° Elbow?

A JIC female 90° elbow is a crimp-on hose fitting with two jobs: it terminates a braided hose on the stem end, and it turns the hose axis at a right angle so the line can reach a port that sits at 90° to the hose run. The port end is a JIC female UNF thread with an internal 74° cone seat. The 74° figure is the included angle of the cone, with each flank 37° from the axis, which is why JIC fittings are also called JIC 37 degree flare fittings. When a male JIC 37° flare stud is tightened into the seat, the two cone faces contact metal-to-metal and the joint seals without O-rings, washers, or sealant.

The 90° angle exists for one practical reason: port access. Cylinder ends, valve block faces, and pump outlets often face sideways, and a straight hose fitting would force the hose to bend immediately at the joint. That sharp bend is where hoses fail first, because the reinforcement works against itself at every pressure pulse. A 90° elbow redirects the hose cleanly at the port, keeps the bend radius above the minimum, and lets the line run straight into the available space. On excavators, agricultural machines, and industrial equipment, this is the standard solution for right-angle connections.

When to Choose 90° Instead of 45° or Straight

  • Choose a straight fitting when the port aligns with the hose run and there is clearance to swing a wrench.
  • Choose a 45° elbow when the hose needs a gentle change of direction and space is moderately tight.
  • Choose a 90° elbow when the port faces sideways and the hose must turn at a right angle to reach it. If a 45° elbow would leave the hose rubbing against a component or bending too sharply downstream, the 90° version is the correct call.

Datos dimensionales y roscas

Símbolo Descripción
E JIC female thread (UNF, SAE J514), 7/16″-20 to 2-1/2″-12
A Horizontal length from the bend center to the female end
C Effective depth of the female thread and seat
H Vertical height from the bend center to the hose-end face
S2 Hex across flats at the female end
Guión Diámetro interior de la manguera en incrementos de 1/16″ (de -03 a -32)
DN Diámetro interior de la manguera en milímetros (de 5 a 50)

Full dimension drawings with A, C, H, and S2 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.

Tabla completa de dimensiones (matriz de referencias) {#by-tamaño-de-rosca}

Read the table with your JIC thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 26791-[thread dash]-[hose dash]RW: for example, 26791-08-08RW has a 3/4″-16 thread and suits a -08 (12 mm) braided hose. In the largest sizes the part number carries a W in the suffix (26791-20-20WRW); keep this letter exactly as shown when ordering. If you need the same geometry for spiral hose, order the 26792 series.

N.º de referencia. Rosca E (UNF) Diámetro interior de la manguera DN (mm) Guión A (mm) C (mm) H (mm) S2 (mm)
26791-04-03RW 7/16″-20 5 03 26.5 9 30.5 15
26791-04-04RW 7/16″-20 6 04 30 9 33.5 15
26791-05-04RW 1/2″-20 6 04 30 9.5 34 17
26791-05-05RW 1/2″-20 8 05 33 9.5 37 17
26791-05-06RW 1/2″-20 10 06 35.3 9.5 39.3 17
26791-06-04RW 9/16″-18 6 04 30 10.5 34 19
26791-06-05RW 9/16″-18 8 05 33 10.5 37 19
26791-06-06RW 9/16″-18 10 06 35.3 10.5 39.3 19
26791-06-08RW 9/16″-18 12 08 41 10.5 45.5 19
26791-08-06RW 3/4″-16 10 06 35.3 11 41.3 24
26791-08-08RW 3/4″-16 12 08 41 11 47 24
26791-08-10RW 3/4″-16 16 10 56.5 11 51.5 24
26791-10-08RW 7/8″-14 12 08 41 13 48 27
26791-10-10RW 7/8″-14 16 10 56.5 13 52.5 27
26791-10-12RW 7/8″-14 20 12 67 13 64 27
26791-12-08RW 1,1/16″-12 12 08 41 15 49.5 32
26791-12-10RW 1,1/16″-12 16 10 56.5 15 54 32
26791-12-12RW 1,1/16″-12 20 12 65.5 15 63.5 32
26791-12-16RW 1,1/16″-12 25 16 76.7 15 70 32
26791-14-12RW 1,3/16″-12 20 12 65.5 15 63.5 36
26791-16-12RW 1,5/16″-12 20 12 65.5 16 63.5 41
26791-16-16RW 1,5/16″-12 25 16 76.7 16 70 41
26791-16-20RW 1,5/16″-12 32 20 91.5 16 81 41
26791-20-20WRW 1,5/8″-12 32 20 91.5 17 80.5 50
26791-24-20WRW 1,7/8″-12 32 20 91.5 20 79.5 55
26791-24-24WRW 1,7/8″-12 40 24 109.4 20 94 55
26791-32-32WRW 2,1/2″-12 50 32 133.1 23.5 121.8 75

The dimensions shown are for braided hose. For spiral hose use the 26792 series, whose stem is longer to engage the extra reinforcement layers.

Material y tratamiento térmico

Artículo Opción estándar Opción Premium
Material Acero al carbono de alta resistencia forjado en frío (20#/35#/45#) Acero inoxidable 304 o 316L
Tratamiento térmico Carburación y temple, dureza del núcleo: HRC 20-28 Tratamiento en solución, resistencia estable a la corrosión
Superficie Recubrimiento de zinc trivalente (96 h de prueba de niebla salina) Zinc-níquel (720 h), Dacromet (1000 h) o pasivado
Clase «Thread» Clase 2A de la UNF, con calibre comprobado Lo mismo, con inspección mediante el calibre de rosca 100%

El forjado en frío conserva el sentido de las fibras del acero, lo que aumenta la resistencia a la fatiga ante las pulsaciones de presión. Cada lote sometido a tratamiento térmico se somete a pruebas de dureza y se registra, por lo que el valor de dureza que figura en el certificado de material (MTR) coincide con el de las piezas que recibes.

Presión de trabajo

Artículo Valoración
JIC female end (SAE J514 / ISO 8434-2) Hasta 34,5 MPa (5.000 psi) en la clase de presión estándar; depende del tamaño; los tamaños de manguera más pequeños tienen una clasificación de presión más alta según la norma.
Conjunto engarzado Depende de la manguera; las estructuras trenzadas 1SN/2SN de estos tamaños suelen soportar entre 8 y 40 MPa (1.160-5.800 psi)
Prueba de fábrica Every elbow is 100% pressure tested before shipment

Las características técnicas exactas de la combinación de tu número de referencia y manguera se confirman en la ficha técnica y por parte de nuestros ingenieros antes del envío.

Ámbito de funcionamiento de presión y temperatura

Temperatura Retención de la presión
-40 °C 100% de presión nominal
-20 °C 100%
0 °C 100%
+20 °C 100%
+40 °C 100%
+60 °C 100%
+80 °C 100%
+100 °C 100%
+120 °C 100% (system derating governed by hose and elastomer seals, not by the elbow)

The steel elbow body holds full rated pressure across the whole temperature window. In a crimped assembly the working pressure is governed by the weakest component, normally the hose; use the hose derating curve for the system, and the elbow will not be the limiting part.

Selección y pedido

The 26791-RW series covers the full common range of JIC hydraulic hose fittings for braided hose, from -03 to -32, so most orders can be placed directly from the tables below.

Cómo interpretar la tabla de referencias

Find your JIC thread in the E column, then the hose dash size you use. The intersecting row gives the order code, for example a 7/8″-14 thread with a -10 hose gives 26791-10-10RW. If your combination is not listed, send us both sizes; a custom JIC female elbow is machined on request.

Tabla de tamaños de roscas JIC

Use this chart to identify any JIC fitting by its thread and to confirm the matching hose dash sizes. It is the same mapping used in the matrix above.

Hilo de UNF Raya de hilo Salpicadero típico de «Hose»
7/16″-20 -04 -03, -04
1/2″-20 -05 -04, -05, -06
9/16″-18 -06 -04, -05, -06, -08
3/4″-16 -08 -06, -08, -10
7/8″-14 -10 -08, -10, -12
1,1/16″-12 -12 -08, -10, -12, -16
1,3/16″-12 -14 -12
1,5/16″-12 -16 -12, -16, -20
1,5/8″-12 -20 -16, -20
1,7/8″-12 -24 -20, -24
2,1/2″-12 -32 -32

Servicio de referencias cruzadas

Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, cone angle, hose size, bend angle, and body dimensions, then confirm the exact 26791-RW equivalent before you place the order. The service covers JIC 37 degree flare fittings, JIC hydraulic hose fittings, and JIC crimp fittings in your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.

Embalaje y logística

Artículo Detalle
Embalaje estándar 10 unidades por caja (tamaños pequeños), 50 unidades por embalaje (normalmente)
Peso bruto Calculado por talla y confirmado en la factura proforma
Marcado Etiqueta de la caja con el número de pieza, la cantidad y el número de lote para el control de entrada
Origen Fabricado en China, fábrica de HENGHUA
Documentos de exportación Factura comercial, lista de embalaje, MTR, certificado de conformidad

Guía de montaje y uso

Procedimiento de engastado en cuatro pasos

Crimping a JIC female 90° elbow follows the same discipline as any JIC crimp fittings job: the crimp parameters decide everything, so never start without the data sheet.

  1. Corta la manguera en ángulo recto: use a hose cutter, never a hacksaw or an angle grinder. A square, clean end is the precondition for a uniform ferrule grip.
  2. Marca la profundidad de inserción: read the insert depth for your hose series from the crimp data sheet and mark the line on the hose cover.
  3. Lubricar e introducir: apply a thin film of assembly lubricant to the stem and the hose bore, then push the elbow into the hose until the mark meets the ferrule.
  4. Engarzar y comprobar: select the die per the crimp table, crimp in one continuous stroke, then measure the crimp outside diameter with a caliper and compare with the tolerance.

Connecting the JIC Female End

Clean the internal 74° cone seat and the mating male 37° flare stud with a lint-free cloth. Orient the elbow so the hose exits in the direction the routing requires, then thread the male stud in by hand and tighten to the torque listed for the thread size, holding the elbow by the S2 hex. The metal-to-metal cone does the sealing, so no tape and no sealant is applied to the cone faces. JIC 37 degree flare fittings seal by cone contact alone, which is why both faces must stay clean and dry. Because the female end is a straight UNF thread, you can rotate the elbow during tightening to aim the hose exactly where the routing requires.

Advertencias sobre la instalación

  • ❌ Nunca mezcles racores y casquillos de diferentes proveedores, aunque las medidas de la rosca y de la manguera parezcan idénticas. La geometría del vástago, la dureza del casquillo y los parámetros de engarzado difieren, y una unión mixta presentará fugas o se soltará bajo presión.
  • ❌ Never crimp without the matching crimp data sheet. An under-crimped joint weeps, and an over-crimped joint damages the hose reinforcement.
  • ❌ Never recrimp a fitting after a failed attempt, and never reuse a fitting removed from a hose.
  • ❌ Never apply sealant to the 74° cone seat or the male flare cone. It hardens, blocks metal-to-metal contact, and contaminates the circuit.
  • ❌ Do not use a 90° elbow to force a hose into a bend tighter than its minimum bend radius; the elbow solves port access, but the hose still needs its rated bend radius downstream.
  • ✔ Tras el montaje, somete el circuito a una prueba de presión a 1,5 veces la presión de servicio y comprueba que no haya fugas en todas las uniones.

Personalización OEM y trazabilidad de la calidad

Opciones de personalización

  • Personalización del tamaño y la rosca: non-standard thread and hose combinations, special bend angles, and custom stem lengths machined to your drawing.
  • Personalización del tratamiento superficial: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según las condiciones ambientales y las especificaciones de corrosión.
  • Marcado láser: su logotipo, el número de pieza y el código de lote marcados con láser en el hexágono para garantizar una trazabilidad completa.
  • Opciones de materiales: Acero inoxidable 304/316L para circuitos químicos, marinos y en contacto con alimentos, con certificados de pasivación.

Sistema de calidad y trazabilidad

Cada lote sigue un proceso documentado: recepción del acero con certificado de fábrica → forjado en frío → mecanizado CNC → tratamiento térmico → recubrimiento → inspección de las dimensiones y del calibre de rosca 100% → prueba de presión → marcado láser → embalaje. El número de lote que figura en la caja de cartón remite al lote de materia prima, al registro de tratamiento térmico y al informe de inspección. Se facilitan informes de ensayo de materiales (MTR) con cada pedido previa solicitud, y se pueden tramitar informes de inspección de terceros (BV/SGS) antes del envío.

Preguntas frecuentes

Q: What is a JIC female 90° elbow? A: It is a crimp-on hose elbow with a female JIC UNF thread and an internal 74° cone seat on the port end, built to SAE J514 / ISO 8434-2. The 74° figure is the included cone angle; each flank is 37° from the axis, the same geometry as a male JIC 37° flare stud.

Q: When should I use a 90° elbow? A: Use a 90° elbow when the port faces sideways and the hose must turn at a right angle to reach it, such as cylinder ends, valve block faces, and pump outlets. It keeps the hose from bending sharply at the joint and keeps the bend radius above the minimum.

Q: What is the difference between the 45° and 90° versions? A: The bend angle. The 45° elbow (26741 series) redirects the hose gently for moderately tight spaces, while the 90° elbow (26791 series) makes a right-angle turn for side-facing ports. Both use the same JIC female 74° cone seat and the same crimp stem practice.

Q: What hose does the 26791-RW series fit? A: The series is designed for braided hose, typically EN 853 1SN/2SN or SAE 100R1AT/R2AT constructions from -03 to -32. For spiral hose use the 26792 series, which has a longer stem for the extra reinforcement layers.

Q: Does the female end need sealant or an O-ring? A: No. The 74° cone seat seals metal-to-metal against a male JIC 37° flare stud. Keep both cone faces clean and dry, and tighten to the listed torque. An O-ring is used only on ORFS fittings, which have a flat-face seal geometry.

P: ¿Podéis facilitarme los datos de engaste para mi manguera? R: Sí. Cada pedido incluye la ficha técnica de engaste correspondiente al modelo de su manguera, con la profundidad de inserción, el diámetro exterior del engaste y la selección de matrices. Unos parámetros de engaste correctos son lo que distingue a los racores de engaste JIC fiables de los que sufren fallos prematuros, por lo que los confirmamos antes del envío. Envíenos la serie y la marca de su manguera, y nuestros ingenieros confirmarán los parámetros de engaste antes del envío.

Solicitar un presupuesto

Tell us the JIC thread, the hose dash size, the hose construction, and the annual quantity. Whether you need stock JIC hydraulic hose fittings for distribution or a custom JIC female 90° elbow for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every elbow leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.

Consulta sobre nuestro producto

Somos un proveedor internacional de accesorios y equipos hidráulicos, y ofrecemos una solución integral de abastecimiento a una amplia variedad de sectores. Nuestros productos incluyen: mangueras hidráulicas, racores, adaptadores, acoplamientos rápidos, conectores, protectores de mangueras, equipos hidráulicos y mucho más: todo lo que necesitas para que tus operaciones funcionen sin problemas y de forma eficiente.
Indíquenos sus necesidades mediante el formulario que aparece a continuación. Nuestro equipo le responderá con asesoramiento especializado y un presupuesto personalizado para garantizar el buen funcionamiento de sus operaciones.