BSPT Male Fitting: 13013-SP Series

Why This BSPT Male Fitting Passes the Compliance Gate
A BSPT male fitting is a hose fitting whose port side is a male taper thread from the R series (British Standard Pipe Taper) and whose hose side is a ribbed stem for a crimped termination. The 13013-SP series from HENGHUA is the large-size heavy-duty execution of this family, covering five part numbers from -12 to -32 with R-series taper threads from R3/4″ to R2″. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this fitting is a compliance gate; for maintenance teams it is the crimped BSPT termination that carries the big lines on mobile and industrial machines.
- BSPT taper thread (R series): the male thread is tapered and seals by thread interference per ISO 7-1, so a thread sealant (PTFE tape or pipe dope) is applied before assembly. An R taper thread must never be interchanged with a parallel G (BSPP) thread, which seals by a cone, washer, or O-ring instead.
- Large-bore coverage: -12 to -32 with hose bores DN 20 to DN 50 covers the big lines on excavators, loaders, drilling rigs, presses, agricultural equipment, and plant hydraulics where R taper ports are specified.
- Heavy-duty execution: the ribbed stem is machined on the heavy stem profile of the family, matched to the reinforcement layers of the hose construction you run.
- Centre hexagon: the drawing shows one hexagon, S1, between the threaded section and the hose stem, giving a solid wrenching point for tightening and removal.
- Comprobación de la compuerta del fabricante original (OEM): full dimensional and material conformance with taper thread form per ISO 7-1, with material test reports (MTR) available for every batch.
Ventajas principales
- Taper thread seal: the R thread seals by interference, which is the standard taper connection on European-style circuits, agricultural equipment, and marine hydraulics.
- Factory-grade crimped hose end: the braided hose is permanently attached by crimping, so the assembly carries the rated pressure of the hose.
- Five part numbers cover the big lines: R3/4″ to R2″ with DN 20 to DN 50 hose bores, matched to the heavy end of the BSPT crimp range.
- Crimp data supplied: every order includes insert depth, crimp outside diameter, and die selection for your hose series.
- Opciones de ensayo de niebla salina de 96 a 1.000 h: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según el entorno de uso.
Especificaciones técnicas
What Is This BSPT Male Fitting?
This BSPT male fitting joins a hose to a male taper thread connection. The port end is a male R-series taper thread (British Standard Pipe Taper, thread form per ISO 7-1): the thread diameter reduces toward the tip, so the flanks wedge together as the fitting is tightened, and the metal-to-metal interference is what seals the joint. Because the seal depends on interference, a thread sealant such as PTFE tape or pipe dope is applied before assembly. This is fundamentally different from a parallel G (BSPP) thread, which is cylindrical and seals by a separate element: a 60° cone, a bonded washer, or an O-ring. An R thread and a G thread are not interchangeable, and the two sealing principles must never be mixed on one joint.
The hose side of the fitting is a ribbed stem that is crimped onto the hose with a steel ferrule. Crimping produces a permanent, factory-grade attachment that lets the assembly carry the working pressure of the hose, which is why the taper-thread family with crimped ends is used across agricultural and construction machinery, marine hydraulics, and general industrial circuits where R taper ports are specified. The single hexagon S1 sits between the threaded section and the hose stem, giving a firm wrenching point when you tighten the fitting into its port and when you remove it.
The 13013-SP is the large-size member of the BSPT male crimp family. The base 13011-SP series spans the full spread from R1/8″ to R2″, while the 13013-SP line concentrates on the heavy-duty executions from R3/4″ to R2″ with its own stem geometry and part numbers. Use this fitting when your big lines terminate on R taper ports. The series covers five sizes from -12 to -32; confirm your hose construction with our engineers and the matching crimp data sheet is supplied with the order.
Datos dimensionales y roscas
| Símbolo | Descripción |
|---|---|
| E | BSPT male taper thread (R series, ISO 7-1), R3/4″ to R2″ |
| A | Overall length of the fitting, from the start of the thread to the shoulder of the hose stem |
| C | Length of the threaded section |
| S1 | Hex across flats, between the threaded section and the hose stem |
| Guión | Hose inside diameter in 1/16″ increments (-12 to -32) |
| DN | Hose inside diameter in millimetres (20 to 50) |
Full dimension drawings with A, C, and S1 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.
Tabla completa de dimensiones (matriz de referencias) {#by-tamaño-de-rosca}
Read the table with your taper thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 13013-[thread dash]-[hose dash]SP: for example, 13013-16-16SP has an R1″ thread and suits a -16 (25 mm) hose.
| N.º de referencia. | Thread E (BSPT) | Diámetro interior de la manguera DN (mm) | Guión | A (mm) | C (mm) | S1 (mm) |
|---|---|---|---|---|---|---|
| 13013-12-12SP | R3/4″x14 | 20 | 12 | 38 | 20 | 30 |
| 13013-16-16SP | R1″x11 | 25 | 16 | 45.9 | 25.5 | 38 |
| 13013-20-20SP | R1.1/4″x11 | 32 | 20 | 51.3 | 26.5 | 46 |
| 13013-24-24SP | R1.1/2″x11 | 40 | 24 | 53.2 | 26.5 | 50 |
| 13013-32-32SP | R2″x11 | 50 | 32 | 58.5 | 30 | 65 |
The dimensions shown are the standard executions of the 13013-SP series as drawn on the factory specification sheet. If your hose construction needs a different stem profile, a custom BSPT male fitting is machined on request.
Select by Hose Dash Size {#by-hose-size}
Match your hose bore first, then confirm the thread for that bore:
| Hose Dash | Hose I.D. (mm) | Part Number |
|---|---|---|
| -12 | 20 | 13013-12-12SP (R3/4″) |
| -16 | 25 | 13013-16-16SP (R1″) |
| -20 | 32 | 13013-20-20SP (R1.1/4″) |
| -24 | 40 | 13013-24-24SP (R1.1/2″) |
| -32 | 50 | 13013-32-32SP (R2″) |
Material y tratamiento térmico
| Artículo | Opción estándar | Opción Premium |
|---|---|---|
| Material | Acero al carbono de alta resistencia forjado en frío (20#/35#/45#) | Acero inoxidable 304 o 316L |
| Tratamiento térmico | Carburación y temple, dureza del núcleo: HRC 20-28 | Tratamiento en solución, resistencia estable a la corrosión |
| Superficie | Recubrimiento de zinc trivalente (96 h de prueba de niebla salina) | Zinc-níquel (720 h), Dacromet (1000 h) o pasivado |
| Clase «Thread» | R-series gauge-checked | Lo mismo, con inspección mediante el calibre de rosca 100% |
El forjado en frío conserva el sentido de las fibras del acero, lo que aumenta la resistencia a la fatiga ante las pulsaciones de presión. Cada lote sometido a tratamiento térmico se somete a pruebas de dureza y se registra, por lo que el valor de dureza que figura en el certificado de material (MTR) coincide con el de las piezas que recibes.
Presión de trabajo
| Artículo | Valoración |
|---|---|
| Conjunto engarzado | Governed by the hose and confirmed per hose assembly test practice; large-bore hose at these sizes typically carries about 10-30 MPa depending on construction and size |
| Threaded end (BSPT) | Seals by taper thread interference per ISO 7-1 with thread sealant; the joint is rated with the assembly and sealant used |
| Prueba de fábrica | Cada accesorio se somete a una prueba de presión 100% antes de su envío. |
Las características técnicas exactas de la combinación de tu número de referencia y manguera se confirman en la ficha técnica y por parte de nuestros ingenieros antes del envío.
Ámbito de funcionamiento de presión y temperatura
| Temperatura | Retención de la presión |
|---|---|
| -40 °C | 100% de presión nominal |
| -20 °C | 100% |
| 0 °C | 100% |
| +20 °C | 100% |
| +40 °C | 100% |
| +60 °C | 100% |
| +80 °C | 100% |
| +100 °C | 100% |
| +120 °C | 100% (system derating governed by hose and elastomer seals elsewhere in the circuit, not by the fitting) |
The steel body holds full rated pressure across the whole temperature window. In a crimped assembly the working pressure is governed by the weakest component, normally the hose; use the hose derating curve for the system, and the fitting will not be the limiting part.
Selección y pedido
The 13013-SP BSPT male fitting series covers the large-bore taper-thread segment of BSP hydraulic hose fittings, so most orders can be placed directly from the table above.
BSPT Thread Size Chart
Use this chart to identify the taper thread on your port. R threads are tapered and are identified by measuring the thread diameter and counting the threads per inch; the taper makes the diameter reduce toward the tip.
| BSPT Thread (R) | TPI | Salpicadero típico de «Hose» |
|---|---|---|
| R3/4″ | 14 | -12 |
| R1″ | 11 | -16 |
| R1.1/4″ | 11 | -20 |
| R1.1/2″ | 11 | -24 |
| R2″ | 11 | -32 |
BSPT vs BSPP Quick Check
R (BSPT) taper threads seal by interference and need PTFE tape or pipe dope. G (BSPP) parallel threads are cylindrical and seal by a cone, washer, or O-ring. The two are not interchangeable, and mixing them on one joint will leak.
Cross Reference Service {#by-oem-part-number}
Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, the stem profile, the hose size, and the body configuration, then confirm the exact 13013-SP equivalent before you place the order. The service covers BSPT fittings, BSP hydraulic hose fittings, and the taper-thread ends of your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.
Embalaje y logística
| Artículo | Detalle |
|---|---|
| Embalaje estándar | 10 pcs per box (typical), fewer per carton for the large sizes |
| Peso bruto | Calculado por talla y confirmado en la factura proforma |
| Marcado | Etiqueta de la caja con el número de pieza, la cantidad y el número de lote para el control de entrada |
| Origen | Fabricado en China, fábrica de HENGHUA |
| Documentos de exportación | Factura comercial, lista de embalaje, MTR, certificado de conformidad |
Guía de montaje y uso
Procedimiento de engastado en cuatro pasos
- Corta la manguera en ángulo recto: use a hose cutter, never a hacksaw or an angle grinder. A square, clean end is the precondition for a uniform ferrule grip.
- Marca la profundidad de inserción: read the insert depth for your hose series from the crimp data sheet and mark the line on the hose cover.
- Lubricar e introducir: apply a thin film of assembly lubricant to the stem and the hose bore, then push the fitting into the hose until the mark meets the ferrule.
- Engarzar y comprobar: select the die per the crimp table, crimp in one continuous stroke, then measure the crimp outside diameter with a caliper and compare with the tolerance.
Threading the BSPT End
Wrap PTFE tape clockwise around the taper thread (or apply pipe dope) before assembly. Thread the fitting into the port by hand until the thread bites, then tighten with a wrench on the S1 hexagon. The taper thread seals by interference; do not over-tighten past the manufacturer’s recommended engagement, because the wedge force grows quickly on taper threads.
Advertencias sobre la instalación
- ❌ Never interchange R (BSPT taper) threads with G (BSPP parallel) threads. They are different sealing systems and are not compatible.
- ❌ Nunca mezcles racores y casquillos de diferentes proveedores, aunque las medidas de la rosca y de la manguera parezcan idénticas. La geometría del vástago, la dureza del casquillo y los parámetros de engarzado difieren, y una unión mixta presentará fugas o se soltará bajo presión.
- ❌ Never crimp without the matching crimp data sheet. An under-crimped joint weeps, and an over-crimped joint damages the hose reinforcement.
- ❌ Never recrimp a fitting after a failed attempt, and never reuse a fitting removed from a hose.
- ✔ Tras el montaje, somete el circuito a una prueba de presión a 1,5 veces la presión de servicio y comprueba que no haya fugas en todas las uniones.
Personalización OEM y trazabilidad de la calidad
Opciones de personalización
- Personalización del tamaño y la rosca: non-standard R thread and hose combinations and special stem lengths machined to your drawing.
- Personalización del tratamiento superficial: trivalent zinc (96 h), zinc-nickel (720 h), or Dacromet (1000 h) salt spray grades.
- Marcado láser: su logotipo, el número de pieza y el código de lote marcados con láser en el hexágono para garantizar una trazabilidad completa.
- Opciones de materiales: Acero inoxidable 304/316L para circuitos químicos, marinos y en contacto con alimentos, con certificados de pasivación.
Sistema de calidad y trazabilidad
Cada lote sigue un proceso documentado: recepción del acero con certificado de fábrica → forjado en frío → mecanizado CNC → tratamiento térmico → recubrimiento → inspección de las dimensiones y del calibre de rosca 100% → prueba de presión → marcado láser → embalaje. El número de lote que figura en la caja de cartón remite al lote de materia prima, al registro de tratamiento térmico y al informe de inspección. Se facilitan informes de ensayo de materiales (MTR) con cada pedido previa solicitud, y se pueden tramitar informes de inspección de terceros (BV/SGS) antes del envío.
Preguntas frecuentes
Q: What is a BSPT male fitting? A: It is a crimp-on fitting for hose whose port end is a male R-series taper thread (ISO 7-1) and whose hose end is a ribbed stem crimped onto the hose.
Q: How does a BSPT thread seal? A: The R thread is tapered, so the flanks wedge together as the fitting is tightened and the metal-to-metal interference seals the joint. Thread sealant such as PTFE tape or pipe dope is applied before assembly.
Q: What is the difference between BSPT (R) and BSPP (G) threads? A: R threads are tapered and seal by thread interference with sealant. G threads are parallel and seal by a separate element: a 60° cone, a bonded washer, or an O-ring. The two are not interchangeable.
Q: What is the difference between the 13013-SP and the 13011-SP series? A: Both are BSPT male crimp fittings with the same taper thread geometry. The 13011-SP spans R1/8″ to R2″; the 13013-SP is the heavy-duty execution line concentrated on the large sizes R3/4″ to R2″ with its own stem geometry and part numbers.
Q: Which hoses work with the 13013-SP series? A: The part numbers in the table suit hose bores from -12 to -32 (DN 20 to DN 50). Confirm your exact hose construction with our engineers, and the matching crimp data sheet will be supplied with the order.
P: ¿Podéis facilitarme los datos de engaste para mi manguera? A: Yes. Every order includes the crimp data sheet for your hose construction, with insert depth, crimp outside diameter, and die selection. Send us your hose series and brand, and our engineers will confirm the crimp parameters before shipment.
Solicitar un presupuesto
Tell us the taper thread, the hose dash size, the hose construction, and the annual quantity. Whether you need stock BSP hydraulic hose fittings for distribution or a custom BSPT male fitting for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every BSPT male fitting leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.
Consulta sobre nuestro producto
Somos un proveedor internacional de accesorios y equipos hidráulicos, y ofrecemos una solución integral de abastecimiento a una amplia variedad de sectores. Nuestros productos incluyen: mangueras hidráulicas, racores, adaptadores, acoplamientos rápidos, conectores, protectores de mangueras, equipos hidráulicos y mucho más: todo lo que necesitas para que tus operaciones funcionen sin problemas y de forma eficiente.
Indíquenos sus necesidades mediante el formulario que aparece a continuación. Nuestro equipo le responderá con asesoramiento especializado y un presupuesto personalizado para garantizar el buen funcionamiento de sus operaciones.
- Manguera hidráulica2323 productos
- Manguera hidráulica en espiral con alambre de acero66 productos
- Manguera hidráulica trenzada con alambre de acero1010 productos
- Manguera hidráulica reforzada con tejido33 productos
- Manguera hidráulica termoplástica33 productos
- Manguera industrial7575 productos
- Manguera de aire99 productos
- Manguera de agua1111 productos
- Manguera de aceite1616 productos
- Manguera para productos químicos66 productos
- Manguera compuesta1616 productos
- Manguera compuesta química33 productos
- Manguera compuesta para uso marítimo55 productos
- Manguera compuesta para petróleo55 productos
- Manguera compuesta para altas temperaturas11 producto
- Manguera compuesta de PTFE11 producto
- Manguera compuesta criogénica11 producto
- Manguera de vapor33 productos
- Manguera multiusos22 productos
- Mangueras para alimentos y bebidas44 productos
- Manguera para hormigón44 productos
- Manguera para cemento22 productos
- Manguera para la manipulación de materiales1111 productos
- Manguera para dragado44 productos
- Accesorios hidráulicos166166 productos
- Accesorios reutilizables para mangueras66 productos
- Racores para mangueras sin casquillo88 productos
- Accesorios hidráulicos JIC1616 productos
- Racores hidráulicos métricos4141 productos
- Racores hidráulicos NPT66 productos
- Racores hidráulicos BSP2626 productos
- Racores hidráulicos SAE3030 productos
- Racores hidráulicos tipo banjo44 productos
- Racores hidráulicos ORFS1111 productos
- Virola1111 productos
- Accesorios con brida2626 productos
- Accesorios de una sola pieza2424 productos
- Adaptadores hidráulicos149149 productos




