BSP Male Double Use Fitting: 12611A Series

Why This BSP Male Double Use Fitting Passes the Compliance Gate
A BSP male double use fitting terminates a braided hydraulic hose in a male G-threaded stud that can seal two ways: by its internal 60° cone seat against a female swivel 60° cone end, or by a bonded washer on its flat hexagon end face against a flat-faced BSPP port. The 12611A series from HENGHUA covers 20 part numbers from -02 to -32 with G-series parallel threads from G1/8″ to G2″. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this fitting is a compliance gate; for maintenance teams it is the dual-seal male termination that fits whichever seat style the machine carries, which cuts the number of part numbers in a service kit.
- Double use sealing: the same fitting seals two ways. The internal (concave) 60° cone seat at the thread tip mates metal-to-metal with a female swivel 60° cone end; the flat hexagon end face at the base of the threads seals with a bonded washer (Dowty-type seal) against a flat-faced port. One part number covers both circuit styles.
- BSPP G thread: the thread is parallel (G series, ISO 228-1) and only holds the connection in both sealing modes; the cone seat or the bonded washer does the sealing. G threads must never be interchanged with BSPT taper threads, which seal by thread interference.
- Wrenching hexagon: the drawing shows one hexagon, S1, at the centre of the fitting; its end face doubles as the bonded-seal shoulder, and its across-flats size matches the standard hex for the G thread.
- Braided hose executions: the part numbers in the table are for braided hose from -02 to -32; for spiral hose, change the series number to 12612A per the factory sheet.
- Comprobación de la compuerta del fabricante original (OEM): full dimensional and material conformance with G thread form per ISO 228-1, with material test reports (MTR) available for every batch.
Ventajas principales
- One fitting, two seal systems: stock one part number and it seals on a 60° cone seat joint or on a flat-faced port with a bonded washer, whichever the machine uses.
- Fewer part numbers in service stock: because the same male end serves both seat styles, maintenance and OEM kits hold fewer line items.
- Metal cone option has no soft element: when used as a 60° cone seat fitting, the joint seals metal-to-metal without a washer or O-ring.
- Bonded seal option is field-serviceable: when used as a flat-face fitting, the seal element is a replaceable bonded washer.
- Opciones de ensayo de niebla salina de 96 a 1.000 h: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según el entorno de uso.
Especificaciones técnicas
What Is This BSP Male Double Use Fitting?
This BSP male double use fitting terminates a braided hose in a male stud end that supports both major BSPP sealing systems. The port end is a male parallel G thread (G series, thread form per ISO 228-1). At the tip of the thread there is a machined internal (concave) 60° cone seat; at the base of the thread, the hexagon end face is machined flat. This gives the fitter two legitimate ways to make the joint:
- Cone seat mode: a female swivel fitting with a 60° cone is screwed onto the thread, and the cone is drawn into the internal cone seat for a metal-to-metal seal. Use this mode when the mating side is a female swivel 60° cone end, as on our 22611-series fittings.
- Bonded seal mode: a bonded washer (Dowty-type seal) is fitted on the flat hexagon end face, and the fitting is screwed into a flat-faced BSPP port or female fitting; the washer is compressed between the two flat faces to seal. Use this mode when the mating side is a flat-faced BSPP port.
Both modes use the same parallel G thread, which never seals by interference. This is why the fitting must never be paired with a BSPT taper thread, which seals by thread interference instead. Choose the sealing mode by the mating component, and choose the seal element accordingly: the cone seat needs a clean matching cone, and the bonded seal mode needs the correct washer compound for the fluid and temperature.
The 12611A is the double use member of the male BSP hose fitting family, complementing the single-purpose male cone seat series (12611) and the flat seat system in one part. The single hexagon S1 sits at the centre of the fitting, its end face serving as the bonded-seal shoulder; its across-flats size matches the standard hex for the G thread, so service tools are shared with the rest of the BSP range. The series covers 20 sizes from -02 to -32; the part numbers in the table are for braided hose, and for spiral hose the series number changes to 12612A. The serrated hose tail is engineered for a crimped termination; confirm your exact hose construction with our engineers and the matching crimp data sheet is supplied with the order.
Datos dimensionales y roscas
| Símbolo | Descripción |
|---|---|
| E | BSPP male thread (G series, ISO 228-1), G1/8″ to G2″ |
| A | Overall length of the fitting, from the thread tip to the end of the hose stem |
| C | Length of the threaded portion |
| S1 | Hex across flats at the centre of the fitting; the end face doubles as the bonded-seal shoulder |
| Guión | Hose inside diameter in 1/16″ increments (-02 to -32) |
| DN | Diámetro interior de la manguera en milímetros (de 5 a 50) |
Full dimension drawings with A, C, and S1 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.
Tabla completa de dimensiones (matriz de referencias) {#by-tamaño-de-rosca}
Read the table with your BSPP thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 12611A-[thread dash]-[hose dash]: for example, 12611A-12-12 has a G3/4″ thread and suits a -12 (20 mm) braided hose.
| N.º de referencia. | Thread E (BSPP) | Diámetro interior de la manguera DN (mm) | Guión | A (mm) | C (mm) | S1 (mm) |
|---|---|---|---|---|---|---|
| 12611A-02-03 | G1/8″ x 28 | 5 | 03 | 22 | 10 | 14 |
| 12611A-04-04 | G1/4″ x 19 | 6 | 04 | 24.5 | 12 | 19 |
| 12611A-04-05 | G1/4″ x 19 | 8 | 05 | 24.5 | 12 | 19 |
| 12611A-06-05 | G3/8″ x 19 | 8 | 05 | 26 | 13.5 | 22 |
| 12611A-06-06 | G3/8″ x 19 | 10 | 06 | 28 | 13.5 | 22 |
| 12611A-06-08 | G3/8″ x 19 | 12 | 08 | 28.5 | 13.5 | 22 |
| 12611A-08-06 | G1/2″x14 | 10 | 06 | 33 | 16 | 27 |
| 12611A-08-08 | G1/2″x14 | 12 | 08 | 33.5 | 16 | 27 |
| 12611A-08-10 | G1/2″x14 | 16 | 10 | 32 | 16 | 27 |
| 12611A-10-08 | G5/8″ x 14 | 12 | 08 | 35 | 17.5 | 30 |
| 12611A-10-10 | G5/8″ x 14 | 16 | 10 | 36 | 17.5 | 30 |
| 12611A-12-08 | G3/4″ x 14 | 12 | 08 | 36.5 | 18.5 | 32 |
| 12611A-12-10 | G3/4″ x 14 | 16 | 10 | 37.5 | 18.5 | 32 |
| 12611A-12-12 | G3/4″ x 14 | 20 | 12 | 37.5 | 18.5 | 32 |
| 12611A-16-12 | «G1» x 11 | 20 | 12 | 42.5 | 20.5 | 41 |
| 12611A-16-16 | «G1» x 11 | 25 | 16 | 43.5 | 20.5 | 41 |
| 12611A-20-16 | G1,1/4″ x 11 | 25 | 16 | 45.5 | 20.5 | 50 |
| 12611A-20-20 | G1,1/4″ x 11 | 32 | 20 | 46.5 | 20.5 | 50 |
| 12611A-24-24 | G1,1/2″ x 11 | 40 | 24 | 49 | 23 | 55 |
| 12611A-32-32 | «G2» x 11 | 50 | 32 | 54.5 | 25.5 | 70 |
The part numbers shown are for the braided-hose version. For spiral hose, change the series number to 12612A, whose stem is longer for the extra reinforcement layers.
Select by Hose Dash Size {#by-hose-size}
Match your hose bore first, then read the thread sizes available for that bore:
| Hose Dash | Hose I.D. (mm) | Available BSPP Threads in the 12611A Series |
|---|---|---|
| -03 | 5 | G1/8″ |
| -04 | 6 | G1/4″ |
| -05 | 8 | G1/4″, G3/8″ |
| -06 | 10 | G3/8″, G1/2″ |
| -08 | 12 | G3/8″, G1/2″, G5/8″, G3/4″ |
| -10 | 16 | G1/2″, G5/8″, G3/4″ |
| -12 | 20 | G3/4″, G1″ |
| -16 | 25 | G1″, G1.1/4″ |
| -20 | 32 | G1.1/4″ |
| -24 | 40 | G1.1/2″ |
| -32 | 50 | G2″ |
Material y tratamiento térmico
| Artículo | Opción estándar | Opción Premium |
|---|---|---|
| Material | Acero al carbono de alta resistencia forjado en frío (20#/35#/45#) | Acero inoxidable 304 o 316L |
| Tratamiento térmico | Carburación y temple, dureza del núcleo: HRC 20-28 | Tratamiento en solución, resistencia estable a la corrosión |
| Superficie | Recubrimiento de zinc trivalente (96 h de prueba de niebla salina) | Zinc-níquel (720 h), Dacromet (1000 h) o pasivado |
| Clase «Thread» | G-series gauge-checked | Lo mismo, con inspección mediante el calibre de rosca 100% |
El forjado en frío conserva el sentido de las fibras del acero, lo que aumenta la resistencia a la fatiga ante las pulsaciones de presión. Cada lote sometido a tratamiento térmico se somete a pruebas de dureza y se registra, por lo que el valor de dureza que figura en el certificado de material (MTR) coincide con el de las piezas que recibes.
Presión de trabajo
| Artículo | Valoración |
|---|---|
| Cone seat mode | Rated for the pressure class of the 60° cone connection geometry; the rating for your part number is confirmed on the datasheet |
| Bonded seal mode | Rated for the connection class with the bonded washer, which sets the temperature and fluid limits of the joint |
| Conjunto engarzado | Governed by the hose and confirmed per hose assembly test practice; braided hose at these sizes typically carries about 10-40 MPa depending on construction and size |
| Prueba de fábrica | Cada accesorio se somete a una prueba de presión 100% antes de su envío. |
The exact rating for your part number, sealing mode, and hose combination is confirmed on the datasheet and by our engineers before shipment.
Ámbito de funcionamiento de presión y temperatura
| Temperatura | Retención de la presión |
|---|---|
| -40 °C | 100% of rated pressure (bonded seal compound dependent at the low end) |
| -20 °C | 100% |
| 0 °C | 100% |
| +20 °C | 100% |
| +40 °C | 100% |
| +60 °C | 100% |
| +80 °C | 100% |
| +100 °C | 100% (bonded seal compound dependent) |
| +120 °C | In cone seat mode the steel joint holds; in bonded seal mode the washer compound sets the limit |
The steel body holds its strength across the full temperature window. In cone seat mode there is no elastomer in the sealing path and the fitting is not the temperature-limiting part. In bonded seal mode the washer compound sets the practical limit; confirm the compound for your fluid and temperature range with our engineers.
Selección y pedido
The 12611A BSP male double use fitting series covers the dual-seal segment of BSP hydraulic hose fittings, from -02 to -32, so most orders can be placed directly from the table above.
BSPP Thread Size Chart
Use this chart to identify the thread on your port. BSPP G threads are parallel; they are identified by measuring the thread outside diameter and counting the threads per inch.
| BSPP Thread (G) | TPI | Raya de hilo | Salpicadero típico de «Hose» |
|---|---|---|---|
| G1/8″ | 28 | -02 | -03 |
| G1/4″ | 19 | -04 | -04 to -05 |
| G3/8″ | 19 | -06 | -05 to -08 |
| G1/2″ | 14 | -08 | -06 to -10 |
| G5/8″ | 14 | -10 | -08 to -10 |
| G3/4″ | 14 | -12 | -08 to -12 |
| G1″ | 11 | -16 | -12 to -16 |
| G1.1/4″ | 11 | -20 | -16 to -20 |
| G1.1/2″ | 11 | -24 | -24 |
| G2″ | 11 | -32 | -32 |
Cross Reference Service {#by-oem-part-number}
Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, the dual seal geometry, the hose size, and the body configuration, then confirm the exact 12611A equivalent before you place the order. The service covers double use fittings, 60° cone fittings, BSP hydraulic hose fittings, and the male stud ends of your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.
Embalaje y logística
| Artículo | Detalle |
|---|---|
| Embalaje estándar | 10 pcs per box (typical), 100 pcs per carton for small sizes |
| Peso bruto | Calculado por talla y confirmado en la factura proforma |
| Marcado | Etiqueta de la caja con el número de pieza, la cantidad y el número de lote para el control de entrada |
| Origen | Fabricado en China, fábrica de HENGHUA |
| Documentos de exportación | Factura comercial, lista de embalaje, MTR, certificado de conformidad |
Guía de montaje y uso
Procedimiento de engastado en cuatro pasos
- Corta la manguera en ángulo recto: use a hose cutter, never a hacksaw or an angle grinder. A square, clean end is the precondition for a uniform ferrule grip.
- Marca la profundidad de inserción: read the insert depth for your hose series from the crimp data sheet and mark the line on the hose cover.
- Lubricar e introducir: apply a thin film of assembly lubricant to the stem and the hose bore, then push the fitting into the hose until the mark meets the ferrule.
- Engarzar y comprobar: select the die per the crimp table, crimp in one continuous stroke, then measure the crimp outside diameter with a caliper and compare with the tolerance.
Connecting in Cone Seat Mode
On the BSP male double use fitting used as a cone seat end, clean the internal cone seat and the cone of the mating female swivel fitting with a lint-free cloth. Hold the S1 hexagon with a wrench and thread the female nut onto the male G thread by hand until the cone touches the seat, then tighten to the torque listed for the thread size. The 60° cone contact does the sealing, so no sealant is applied to the cone faces.
Connecting in Bonded Seal Mode
Used as a flat-face end, fit a bonded washer (Dowty-type seal) of the correct size and compound on the flat hexagon end face, seating it evenly. Clean the flat face of the BSPP port with a lint-free cloth. Thread the fitting into the port and tighten to the torque listed for the thread size; the washer compresses between the two flat faces to seal. Replace the washer at every disassembly, and never reuse a hardened or cut washer.
Advertencias sobre la instalación
- ❌ Nunca mezcles racores y casquillos de diferentes proveedores, aunque las medidas de la rosca y de la manguera parezcan idénticas. La geometría del vástago, la dureza del casquillo y los parámetros de engarzado difieren, y una unión mixta presentará fugas o se soltará bajo presión.
- ❌ Never confuse the two sealing modes: cone seat mode needs a clean mating cone and no sealant; bonded seal mode needs a washer of the right size and compound on the flat end face. Do not use a bonded washer between two cone faces, and do not rely on a bare flat face without a washer.
- ❌ Never confuse G (BSPP parallel) threads with R (BSPT taper) threads. A G thread seals by cone contact or by washer; a taper thread seals by thread interference and needs sealant. The two are not interchangeable.
- ❌ Never crimp without the matching crimp data sheet. An under-crimped joint weeps, and an over-crimped joint damages the hose reinforcement.
- ❌ Never recrimp a fitting after a failed attempt, and never reuse a fitting removed from a hose.
- ✔ Tras el montaje, somete el circuito a una prueba de presión a 1,5 veces la presión de servicio y comprueba que no haya fugas en todas las uniones.
Personalización OEM y trazabilidad de la calidad
Opciones de personalización
- Bonded washer supply: washers supplied with the fittings, in the compound matched to your fluid and temperature.
- Personalización del tamaño y la rosca: non-standard G thread and hose combinations and special stem lengths machined to your drawing.
- Personalización del tratamiento superficial: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según las condiciones ambientales y las especificaciones de corrosión.
- Marcado láser: su logotipo, el número de pieza y el código de lote marcados con láser en el hexágono para garantizar una trazabilidad completa.
- Opciones de materiales: Acero inoxidable 304/316L para circuitos químicos, marinos y en contacto con alimentos, con certificados de pasivación.
Sistema de calidad y trazabilidad
Cada lote sigue un proceso documentado: recepción del acero con certificado de fábrica → forjado en frío → mecanizado CNC → tratamiento térmico → recubrimiento → inspección de las dimensiones y del calibre de rosca 100% → prueba de presión → marcado láser → embalaje. El número de lote que figura en la caja de cartón remite al lote de materia prima, al registro de tratamiento térmico y al informe de inspección. Se facilitan informes de ensayo de materiales (MTR) con cada pedido previa solicitud, y se pueden tramitar informes de inspección de terceros (BV/SGS) antes del envío.
Preguntas frecuentes
Q: What is a BSP male double use fitting? A: It is a crimp-on fitting for braided hose whose port end is a male parallel G thread (ISO 228-1) that can seal two ways: by an internal 60° cone seat at the thread tip against a female swivel 60° cone end, or by a bonded washer on the flat hexagon end face against a flat-faced BSPP port.
Q: Why is it called double use? A: The same part number covers both major BSPP seat styles. One end of the thread carries a 60° internal cone seat, and the hexagon shoulder behind the thread carries a flat bonded-seal face. Depending on the mating component, you use one or the other sealing method.
Q: Which sealing mode should I use? A: Use cone seat mode when the mating side is a female swivel fitting with a 60° cone (for example our 22611-series fittings). Use bonded seal mode when the mating side is a flat-faced BSPP port or female fitting, fitting a bonded washer of the correct size and compound.
Q: What is the difference between the 12611A and the single-purpose 12611 male cone seat series? A: The 12611 seals only by its 60° internal cone seat. The 12611A adds the flat hexagon end face with bonded washer sealing, so one part number serves both cone seat and flat seat circuits.
Q: Which hoses work with the 12611A series? A: The part numbers in the table are for braided hose from -02 to -32 (DN 5 to DN 50). For spiral hose, change the series number to 12612A. Confirm your exact hose construction with our engineers, and the matching crimp data sheet will be supplied with the order.
P: ¿Podéis facilitarme los datos de engaste para mi manguera? A: Yes. Every order includes the crimp data sheet for your hose construction, with insert depth, crimp outside diameter, and die selection. Send us your hose series and brand, and our engineers will confirm the crimp parameters before shipment.
Solicitar un presupuesto
Tell us the BSPP thread, the hose dash size, the hose construction, the sealing mode you use, and the annual quantity. Whether you need stock BSP hydraulic hose fittings for distribution or a custom double use fitting for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every BSP male double use fitting leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.
Consulta sobre nuestro producto
Somos un proveedor internacional de accesorios y equipos hidráulicos, y ofrecemos una solución integral de abastecimiento a una amplia variedad de sectores. Nuestros productos incluyen: mangueras hidráulicas, racores, adaptadores, acoplamientos rápidos, conectores, protectores de mangueras, equipos hidráulicos y mucho más: todo lo que necesitas para que tus operaciones funcionen sin problemas y de forma eficiente.
Indíquenos sus necesidades mediante el formulario que aparece a continuación. Nuestro equipo le responderá con asesoramiento especializado y un presupuesto personalizado para garantizar el buen funcionamiento de sus operaciones.
- Manguera hidráulica2323 productos
- Manguera hidráulica en espiral con alambre de acero66 productos
- Manguera hidráulica trenzada con alambre de acero1010 productos
- Manguera hidráulica reforzada con tejido33 productos
- Manguera hidráulica termoplástica33 productos
- Manguera industrial7575 productos
- Manguera de aire99 productos
- Manguera de agua1111 productos
- Manguera de aceite1616 productos
- Manguera para productos químicos66 productos
- Manguera compuesta1616 productos
- Manguera compuesta química33 productos
- Manguera compuesta para uso marítimo55 productos
- Manguera compuesta para petróleo55 productos
- Manguera compuesta para altas temperaturas11 producto
- Manguera compuesta de PTFE11 producto
- Manguera compuesta criogénica11 producto
- Manguera de vapor33 productos
- Manguera multiusos22 productos
- Mangueras para alimentos y bebidas44 productos
- Manguera para hormigón44 productos
- Manguera para cemento22 productos
- Manguera para la manipulación de materiales1111 productos
- Manguera para dragado44 productos
- Accesorios hidráulicos166166 productos
- Accesorios reutilizables para mangueras66 productos
- Racores para mangueras sin casquillo88 productos
- Accesorios hidráulicos JIC1616 productos
- Racores hidráulicos métricos4141 productos
- Racores hidráulicos NPT66 productos
- Racores hidráulicos BSP2626 productos
- Racores hidráulicos SAE3030 productos
- Racores hidráulicos tipo banjo44 productos
- Racores hidráulicos ORFS1111 productos
- Virola1111 productos
- Accesorios con brida2626 productos
- Accesorios de una sola pieza2424 productos
- Adaptadores hidráulicos149149 productos




