BSP Female Flat Seat 45° Elbow: 22241 Series

Why This BSP Female Flat Seat Elbow Passes the Compliance Gate
A BSP female flat seat 45° elbow terminates a braided hydraulic hose with a 45° turn and connects it to a male BSPP stud through a flat sealing face. The 22241 series from HENGHUA is a one-piece crimp elbow with G-series parallel threads from G1/4″ to G1.1/4″, covering 6 sizes from -04 to -20. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this elbow is a compliance gate; for maintenance teams it is the classic British flat-seat termination for 45° routing.
- BSPP flat seat female end: the parallel G thread (ISO 228-1) terminates in a flat sealing face, the British flat-seat practice per BS 5200. The joint seals with the seal element carried by the mating male stud, typically a bonded washer or an O-ring, compressed between the two faces.
- 45° crimp elbow for braided hose: the one-piece body turns the hose axis by 45°, and the stem is engineered for braided constructions; for spiral hose, order the 22242 series.
- Flat seat versus cone seat: unlike the 60° cone seat family, this female end seals on a flat face, which makes it the standard choice in UK and Commonwealth circuits using bonded-washer studs.
- Comprobación de la compuerta del fabricante original (OEM): full dimensional and material conformance with thread form per ISO 228-1, and material test reports (MTR) available for every batch.
Ventajas principales
- Reliable flat-seat sealing: the flat face gives a wide, stable sealing area for the bonded washer or O-ring of the mating stud, with a simple visual check after assembly.
- 45° space-saving routing: the elbow turns the hose at 45°, keeping the bend radius of the hose intact while changing the direction of the line.
- Rango de funcionamiento de -40 °C a +120 °C: suited to return, pressure, and cooler circuits across mobile and industrial equipment.
- Opciones de ensayo de niebla salina de 96 a 1.000 h: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según el entorno de uso.
Especificaciones técnicas
What Is a BSP Female Flat Seat 45° Elbow?
This elbow terminates a braided hose with the British flat-seat connection, the parallel-thread system defined by BS 5200 and used across UK, Commonwealth, and Middle East hydraulic circuits. On the port end, the fitting carries a BSPP parallel thread (G series, thread form per ISO 228-1) and a flat sealing face at the bottom of the thread. The G thread is parallel and does not seal by itself; it only draws the joint together. The sealing element lives on the mating side: a male BSPP stud with a recessed cone normally carries a bonded washer, or an O-ring in the flat-seat variant, and tightening compresses that element against the flat face of this female end.
The flat face is the design point: it must stay clean and undamaged, because the washer or O-ring seats directly on it. This is what separates the flat seat family from the 60° cone seat family: a cone seat seals metal-to-metal against a male cone, while a flat seat seals by compressing an elastomer element against a flat face. The two female ends are not interchangeable, and neither is compatible with a BSPT taper thread, which seals by thread interference instead.
On the hose end, the elbow is a crimp termination for braided hose. The 45° angle changes the direction of the hose run by half of a right angle, which is the routing choice when a 90° turn is too sharp for the hose bend radius and a straight fitting cannot reach the port. Typical positions are cylinder ports, valve blocks, cooler connections, and pump outlets. The series covers six sizes from -04 to -20; the largest size carries the -W suffix shown on the drawing, and the suffix must be kept in the order code.
Datos dimensionales y roscas
| Símbolo | Descripción |
|---|---|
| E | BSPP female thread (G series, ISO 228-1), G1/4″ to G1.1/4″ |
| A | Overall length of the elbow along the hose axis direction |
| C | Depth dimension of the port end per drawing |
| H | Height from the thread end to the hose centreline |
| S2 | Hex across flats of the nut collar at the port end |
| Guión | Hose inside diameter in 1/16″ increments (-04 to -20) |
| DN | Hose inside diameter in millimetres (6 to 32) |
Full dimension drawings with A, C, H, and S2 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.
Tabla completa de dimensiones (matriz de referencias) {#by-tamaño-de-rosca}
Read the table with your BSPP thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 22241-[thread dash]-[hose dash]: for example, 22241-12-12 has a G3/4″ thread and suits a -12 (20 mm) braided hose.
| N.º de referencia. | Thread E (BSPP) | Diámetro interior de la manguera DN (mm) | Guión | A (mm) | C (mm) | H (mm) | S2 (mm) |
|---|---|---|---|---|---|---|---|
| 22241-04-04 | G1/4″ x 19 | 6 | 04 | 40.9 | 8 | 18.8 | 19 |
| 22241-06-06 | G3/8″ x 19 | 10 | 06 | 45.3 | 9 | 21 | 22 |
| 22241-08-08 | G1/2″x14 | 12 | 08 | 58.9 | 10.5 | 24 | 27 |
| 22241-12-12 | G3/4″ x 14 | 20 | 12 | 77.4 | 13.5 | 30 | 32 |
| 22241-16-16 | «G1» x 11 | 25 | 16 | 82.7 | 15.5 | 31.5 | 41 |
| 22241-20-20W | G1,1/4″ x 11 | 32 | 20 | 97.3 | 15.5 | 36.6 | 50 |
The dimensions shown are for the braided-hose version. For spiral hose, use the 22242 series, whose stem is longer for the extra reinforcement layers.
Material y tratamiento térmico
| Artículo | Opción estándar | Opción Premium |
|---|---|---|
| Material | Acero al carbono de alta resistencia forjado en frío (20#/35#/45#) | Acero inoxidable 304 o 316L |
| Tratamiento térmico | Carburación y temple, dureza del núcleo: HRC 20-28 | Tratamiento en solución, resistencia estable a la corrosión |
| Superficie | Recubrimiento de zinc trivalente (96 h de prueba de niebla salina) | Zinc-níquel (720 h), Dacromet (1000 h) o pasivado |
| Clase «Thread» | G-series gauge-checked | Lo mismo, con inspección mediante el calibre de rosca 100% |
El forjado en frío conserva el sentido de las fibras del acero, lo que aumenta la resistencia a la fatiga ante las pulsaciones de presión. Cada lote sometido a tratamiento térmico se somete a pruebas de dureza y se registra, por lo que el valor de dureza que figura en el certificado de material (MTR) coincide con el de las piezas que recibes.
Presión de trabajo
| Artículo | Valoración |
|---|---|
| BSPP flat seat end | Medium-to-high pressure class, size-dependent; the flat-seat design of this geometry is commonly rated up to about 40 MPa (400 bar) in the small and medium sizes |
| Conjunto engarzado | Governed by the hose; braided hose at these sizes typically carries about 8-40 MPa depending on construction and size |
| Prueba de fábrica | Every elbow is 100% pressure tested before shipment |
The exact rating for your part number and hose combination is confirmed on the datasheet and by our engineers before shipment. Note that the assembled joint rating also depends on the bonded washer or O-ring selected for the mating stud; use a seal element rated for your circuit pressure.
Ámbito de funcionamiento de presión y temperatura
| Temperatura | Retención de la presión |
|---|---|
| -40 °C | 100% de presión nominal |
| -20 °C | 100% |
| 0 °C | 100% |
| +20 °C | 100% |
| +40 °C | 100% |
| +60 °C | 100% |
| +80 °C | 100% |
| +100 °C | 100% |
| +120 °C | 100% (la reducción de potencia del sistema viene determinada por la manguera y las juntas de elastómero, no por el racor) |
The steel body holds full rated pressure across the whole temperature window. In a crimped assembly the working pressure is governed by the weakest component, normally the hose or the seal element; use the hose derating curve for the system.
Selección y pedido
The 22241 series covers the flat seat segment of BSP hydraulic hose fittings for braided hose, from -04 to -20, so most orders can be placed directly from the tables below.
Cómo interpretar la tabla de referencias
Find your BSPP thread in the E column, then the hose dash size you use. The intersecting row gives the order code, for example a G3/8″ thread with a -06 hose gives 22241-06-06. If your combination is not listed, send us both sizes; a custom BSP flat seat elbow is machined on request.
BSPP Thread Size Chart
Use this chart to identify the thread on your port and to confirm the matching hose dash sizes. BSPP G threads are parallel; they are identified by measuring the thread outside diameter and counting the threads per inch.
| BSPP Thread (G) | TPI | Raya de hilo | Salpicadero típico de «Hose» |
|---|---|---|---|
| G1/4″ | 19 | -04 | -03, -04 |
| G3/8″ | 19 | -06 | -04, -05, -06 |
| G1/2″ | 14 | -08 | -06, -08 |
| G5/8″ | 14 | -10 | -08, -10 |
| G3/4″ | 14 | -12 | -08, -10, -12 |
| G1″ | 11 | -16 | -12, -16 |
| G1.1/4″ | 11 | -20 | -16, -20 |
Servicio de referencias cruzadas
Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, sealing face type, hose size, and bend angle, then confirm the exact 22241 equivalent before you place the order. The service covers BSPP flat seat fittings, BSP hydraulic hose fittings, and BSP elbows in your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.
Embalaje y logística
| Artículo | Detalle |
|---|---|
| Embalaje estándar | 10 pcs per box (typical), 100 pcs per carton for small sizes |
| Peso bruto | Calculado por talla y confirmado en la factura proforma |
| Marcado | Etiqueta de la caja con el número de pieza, la cantidad y el número de lote para el control de entrada |
| Origen | Fabricado en China, fábrica de HENGHUA |
| Documentos de exportación | Factura comercial, lista de embalaje, MTR, certificado de conformidad |
Guía de montaje y uso
Procedimiento de engastado en cuatro pasos
- Corta la manguera en ángulo recto: use a hose cutter, never a hacksaw or an angle grinder. A square, clean end is the precondition for a uniform ferrule grip.
- Marca la profundidad de inserción: read the insert depth for your hose series from the crimp data sheet and mark the line on the hose cover.
- Lubricar e introducir: apply a thin film of assembly lubricant to the stem and the hose bore, then push the fitting into the hose until the mark meets the ferrule.
- Engarzar y comprobar: select the die per the crimp table, crimp in one continuous stroke, then measure the crimp outside diameter with a caliper and compare with the tolerance.
Connecting the Flat Seat End
Check the flat sealing face for nicks or scratches before assembly; a damaged face will leak even with a new seal element. Fit the correct bonded washer or O-ring onto the mating male stud, thread the stud into the BSPP female end by hand until the seal element touches the flat face, then tighten to the torque listed for the thread size. Replace the seal element at every disassembly; bonded washers and O-rings are single-use in a rated joint.
Advertencias sobre la instalación
- ❌ Nunca mezcles racores y casquillos de diferentes proveedores, aunque las medidas de la rosca y de la manguera parezcan idénticas. La geometría del vástago, la dureza del casquillo y los parámetros de engarzado difieren, y una unión mixta presentará fugas o se soltará bajo presión.
- ❌ Never confuse a flat seat female end with a 60° cone seat end or a BSPT taper thread. Each sealing family needs its matching male stud and seal element, and the three are not interchangeable.
- ❌ Never reuse a bonded washer or O-ring. The seal element is part of the rated joint and must be replaced at every assembly.
- ❌ Never assemble on a scratched or nicked flat face. The face is the sealing surface; repair or replace the fitting if it is damaged.
- ❌ Never crimp without the matching crimp data sheet, and never recrimp a fitting after a failed attempt.
- ✔ Tras el montaje, somete el circuito a una prueba de presión a 1,5 veces la presión de servicio y comprueba que no haya fugas en todas las uniones.
Personalización OEM y trazabilidad de la calidad
Opciones de personalización
- Personalización del tamaño y la rosca: non-standard G thread and hose combinations and special bend angles machined to your drawing.
- Personalización del tratamiento superficial: zinc trivalente (96 h), zinc-níquel (720 h) o Dacromet (1000 h), según las condiciones ambientales y las especificaciones de corrosión.
- Marcado láser: su logotipo, el número de pieza y el código de lote marcados con láser en el hexágono para garantizar una trazabilidad completa.
- Opciones de materiales: Acero inoxidable 304/316L para circuitos químicos, marinos y en contacto con alimentos, con certificados de pasivación.
Sistema de calidad y trazabilidad
Cada lote sigue un proceso documentado: recepción del acero con certificado de fábrica → forjado en frío → mecanizado CNC → tratamiento térmico → recubrimiento → inspección de las dimensiones y del calibre de rosca 100% → prueba de presión → marcado láser → embalaje. El número de lote que figura en la caja de cartón remite al lote de materia prima, al registro de tratamiento térmico y al informe de inspección. Se facilitan informes de ensayo de materiales (MTR) con cada pedido previa solicitud, y se pueden tramitar informes de inspección de terceros (BV/SGS) antes del envío.
Preguntas frecuentes
Q: What is a BSP female flat seat 45° elbow? A: It is a one-piece crimp elbow for braided hose with a BSPP female port end (G series, parallel thread) that seals on a flat face, per the British flat-seat practice of BS 5200, with a 45° body angle for routing.
Q: How does the flat seat seal? A: The G thread is parallel and does not seal by itself. A bonded washer or O-ring carried by the mating male stud is compressed against the flat face of this female end when the joint is tightened. Replace the seal element at every assembly.
Q: What is the difference between flat seat, 60° cone seat, and BSPT? A: A flat seat seals by compressing an elastomer element against a flat face. A 60° cone seat seals metal-to-metal between two cone faces. BSPT (R) is a taper thread that seals by thread interference. The three systems are not interchangeable.
Q: What hose does the 22241 series fit? A: The series is designed for braided hose in sizes -04 to -20 (DN 6 to 32). For spiral hose, order the 22242 series. Confirm your exact hose construction with our engineers, and the matching crimp data sheet will be supplied with the order.
Q: Do I need to supply the bonded washer or O-ring? A: The seal element normally travels with the male stud you are connecting to, so check your mating part. If you need a matched seal element set for your order, tell our engineers and we will include the correct washers or O-rings with the shipment.
P: ¿Podéis facilitarme los datos de engaste para mi manguera? A: Yes. Every order includes the crimp data sheet for your hose construction, with insert depth, crimp outside diameter, and die selection. Send us your hose series and brand, and our engineers will confirm the crimp parameters before shipment.
Solicitar un presupuesto
Tell us the BSPP thread, the hose dash size, the hose construction, and the annual quantity. Whether you need stock BSP hydraulic hose fittings for distribution or a custom flat seat elbow for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every elbow leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.
Consulta sobre nuestro producto
Somos un proveedor internacional de accesorios y equipos hidráulicos, y ofrecemos una solución integral de abastecimiento a una amplia variedad de sectores. Nuestros productos incluyen: mangueras hidráulicas, racores, adaptadores, acoplamientos rápidos, conectores, protectores de mangueras, equipos hidráulicos y mucho más: todo lo que necesitas para que tus operaciones funcionen sin problemas y de forma eficiente.
Indíquenos sus necesidades mediante el formulario que aparece a continuación. Nuestro equipo le responderá con asesoramiento especializado y un presupuesto personalizado para garantizar el buen funcionamiento de sus operaciones.
- Manguera hidráulica2323 productos
- Manguera hidráulica en espiral con alambre de acero66 productos
- Manguera hidráulica trenzada con alambre de acero1010 productos
- Manguera hidráulica reforzada con tejido33 productos
- Manguera hidráulica termoplástica33 productos
- Manguera industrial7575 productos
- Manguera de aire99 productos
- Manguera de agua1111 productos
- Manguera de aceite1616 productos
- Manguera para productos químicos66 productos
- Manguera compuesta1616 productos
- Manguera compuesta química33 productos
- Manguera compuesta para uso marítimo55 productos
- Manguera compuesta para petróleo55 productos
- Manguera compuesta para altas temperaturas11 producto
- Manguera compuesta de PTFE11 producto
- Manguera compuesta criogénica11 producto
- Manguera de vapor33 productos
- Manguera multiusos22 productos
- Mangueras para alimentos y bebidas44 productos
- Manguera para hormigón44 productos
- Manguera para cemento22 productos
- Manguera para la manipulación de materiales1111 productos
- Manguera para dragado44 productos
- Accesorios hidráulicos166166 productos
- Accesorios reutilizables para mangueras66 productos
- Racores para mangueras sin casquillo88 productos
- Accesorios hidráulicos JIC1616 productos
- Racores hidráulicos métricos4141 productos
- Racores hidráulicos NPT66 productos
- Racores hidráulicos BSP2626 productos
- Racores hidráulicos SAE3030 productos
- Racores hidráulicos tipo banjo44 productos
- Racores hidráulicos ORFS1111 productos
- Virola1111 productos
- Accesorios con brida2626 productos
- Accesorios de una sola pieza2424 productos
- Adaptadores hidráulicos149149 productos




