Adaptadores hidráulicos
Hydraulic Adapters: Join Any Two Connection Standards
Hydraulic adapters exist because no machine uses one thread system: a JIC hose line must meet an NPT port, an ORFS circuit a BSPP valve. An adapter joins those two standards in one leak-free part, and the right end combination keeps a repair simple instead of a stack of improvised fittings. This page covers our full range — straight, reducing, swivel, elbow, bulkhead, port, and gauge adapters across every standard we manufacture — with an end-combination matrix, sealing rules, thread identification, and ordering terms. Match your two ends from the tables, then request a quote in minutes.
Por que comprar connosco
| Âncora de confiança | O que isto significa para si | |
|---|---|---|
| 1 | Fabricante direto da fábrica | We produce the adapters, not just resell them. |
| 2 | Qualidade testada por lotes | Dimension-inspected with calibrated gauges; salt-spray tested per ISO 9227. |
| 3 | Every Standard in One Place | Hydraulic adapters in JIC, ORFS, ORB, NPT, BSPP/BSPT, flange, 24° cone, and ISO 6149 ends. |
| 4 | Orçamentos verificados num dia útil | Send both end types and sizes; get a confirmed part number, price, and lead time in one working day. |
| 5 | Amostras gratuitas para projetos elegíveis | Verify thread fit and sealing on your own equipment before volume production. |
A mostrar 1–12 de 149 resultados
What Are Hydraulic Adapters?
A hydraulic adapter has two different connection ends and joins two components that do not share a thread system or sealing method. It is not a hose fitting: adapters connect port to port or fitting to fitting, while the hose end is crimped separately.
Each end seals differently. A JIC end seals on a 37° metal flare; ORFS and ORB ends seal with an O-ring; BSPP seals on a washer or bonded seal; NPT and BSPT seal on the threads themselves. A correctly specified adapter handles both sealing systems in one part — buying by thread size alone is how leaks start.
Core value: identify both ends of the connection, match the sealing method at each end, and one adapter replaces a stack of improvised fittings.
Três percursos do cliente:
- Para fabricantes OEM — standardize port-to-hose transitions across a machine platform.
- For end users — convert a port without a special hose assembly.
- Para distribuidores — stock high-runner combinations instead of slow-moving specials.
Especificações principais
End-Combination Matrix
The most-requested hydraulic adapters join these pairs; both ends come in male, female, and swivel forms.
| End 1 | End 2 | Utilização típica |
|---|---|---|
| JIC 37° (SAE J514) | NPT / NPTF (ASME B1.20.1) | American hose line to pipe port |
| JIC 37° | SAE ORB (SAE J1926) | Hose line to straight-thread port |
| ORFS (SAE J1453) | JIC 37° | Face-seal line to flare port |
| ORFS | SAE ORB | Face-seal line to manifold port |
| ORFS | NPT / NPTF | Face-seal line to pipe port |
| BSPP (ISO 228-1) | JIC 37° | European port to American line |
| BSPT (ISO 7-1) | JIC 37° | Tapered European port to American line |
| Metric 24° cone (ISO 8434-1) | BSPP | European hydraulic systems |
| SAE flange (SAE J518) | JIC 37° | Large-bore flange to hose line |
| ISO 6149 metric port | JIC 37° | Modern metric manifold to hose line |
Adapter Types
Hydraulic adapters are built in the bodies below; the end combination and body style are chosen independently.
| Type | Descrição | Utilização típica |
|---|---|---|
| Straight adapter | Two ends in line, male or female | Standard port conversion |
| Reducer / bushing | Joins two sizes in one standard | Downsizing a port |
| Swivel adapter | One end rotates before torque | Aligning a hose without twisting |
| Elbow / tee | 45°, 90°, or three-port bodies | Routing around obstacles |
| Bulkhead adapter | Panel-mount body with locknut | Passing through a wall or frame |
| Port adapter | Threaded end for a specific port standard | Manifold and valve ports |
| Gauge / test-point adapter | Port for a gauge or test point | Diagnostics and commissioning |
| Hose barb adapter | Threaded end to a barbed tail | Low-pressure push-on connections |
| Weld-on adapter | Weldable body | Tanks, reservoirs, and fabrications |
Thread and Torque Reference
Torque depends on thread and sealing system. ORFS values below are published per SAE J1453-1; confirm other families with our engineers.
| Padrão | Example Thread | Notes on Torque |
|---|---|---|
| ORFS (SAE J1453) | 11/16-16 | 40–44 Nm; maximum remedial torque 45 Nm |
| ORFS (SAE J1453) | 13/16-16 | 55–60 Nm; maximum remedial torque 65 Nm |
| ORFS (SAE J1453) | 1-3/16-12 | 90–99 Nm; maximum remedial torque 146 Nm |
| JIC 37° (SAE J514) | 9/16-18 | Flare seat; confirm per configuration |
| SAE ORB (SAE J1926) | 11/16-16 | O-ring boss; confirm per configuration |
| NPT (ASME B1.20.1) | 1/2-14 | Tapered; sealant required; hand-tight plus 1–2 turns |
Materials and Finish
| Componente | Opção padrão | Corrosive-Service Option |
|---|---|---|
| Adapter body | Carbon steel, zinc or clear trivalent chrome | Aço inoxidável |
| Low-pressure and fuel | Latão | Aço inoxidável |
| Sealing elements | NBR O-rings, copper or bonded washers | FKM O-rings, PTFE-encapsulated seals |
Principais características
- Ten standards joined in any combination
- Straight, reducing, swivel, elbow, tee, bulkhead, port, gauge, and weld-on bodies
- Correct sealing method at each end — flare, O-ring, washer, or thread
- Published torque values with defined remedial limits
- Thread accuracy gauged to size
Installation
Sealing method decides the procedure, and on hydraulic adapters the two ends often differ:
- Identify both ends: measure thread diameter and pitch, then check the seat — 37° cone, flat face with O-ring groove, O-ring boss, or tapered pipe thread.
- Clean both faces and threads; grit trapped at a seat is a guaranteed leak.
- Fit a new O-ring or washer where required; never reuse a crush washer.
- Hand-thread both ends before using a wrench.
- Torque each end to its published value with a calibrated wrench.
- Re-pressurize, wipe dry, and check for weeping; retorque once after the first heat cycle.
Rules that prevent failures:
- Never use sealant on JIC, ORFS, ORB, or BSPP ends — the seat or O-ring seals, and tape shreds can block passages.
- Use sealant only on NPT and BSPT tapered ends, where the threads are the seal.
- Keep the adapter short: each joint adds leak paths.
- Support long hose runs against vibration.
- Never force a mismatched thread; “feels tight” means a damaged thread.
Nomenclature: Describing an Adapter
An adapter is described by two ends and a configuration:
| Campo | Significado | Example |
|---|---|---|
| End 1 | First connection standard and size | JIC 37° male, -08 |
| End 2 | Second connection standard and size | ORB male, -08 |
| Configuração | Body style and angle | Heterossexual |
A typical description reads: -08 JIC 37° male x -08 ORB male, straight. We assign the exact part number on request — send both ends, sizes, and working pressure, and our engineers confirm the code.
Correspondência e identificação
Measure the thread, then look at the seat — several standards share similar diameters:
| Característica | JIC 37° | ORFS | SAE ORB | NPT | BSPP |
|---|---|---|---|---|---|
| Seat | 37° cone | Flat face, O-ring groove | Flat base, O-ring | Tapered thread | Flat face, washer |
| Tópico | UNF liso | Straight UN | UNF liso | Cônico | Straight Whitworth 55° |
| Sealant | Never | Never | Never | Required | Never |
| Elemento de vedação | Metal flare | O-ring | O-ring | Interferência entre roscas | Washer or bonded seal |
A thread that engages loosely then tightens quickly is tapered (NPT or BSPT); one that runs to a hard stop is straight (JIC, ORFS, ORB, BSPP). Send photos with a ruler and we identify both ends free of charge.
Applications and Industries
Hydraulic adapters appear wherever two systems meet:
- Mobile equipment built to mixed US and European standards
- Manifolds and valve blocks with metric ports and JIC lines
- Marine engines and deck machinery
- Agricultural and utility equipment service
- Machine tools, presses, and industrial power units
- Repairs where the right hose assembly is unavailable
Operating temperature follows the sealing element: NBR O-rings suit typical petroleum service, FKM extends the upper range, and copper washers run hotter than aluminum. Confirm against your fluid.
Ordering and Packaging
Ordering hydraulic adapters is straightforward once both ends are confirmed.
- Unit of measure: sold per piece (EA)
- MOQ: one box per size; mixed-size sample kits available
- Customization: end combinations, angles, materials, seal compounds, private label
- Supplied with the matching O-ring or washer where the end requires one
- Export packing: corrugated cartons with moisture barrier for sea freight
Hydraulic Adapters FAQ
Can I connect a JIC hose line to an NPT port with one adapter? Yes — a JIC male to NPT male straight adapter does it in one part. The JIC end seals on its flare; the NPT end seals on its threads, so use sealant on the NPT side only.
Can ORFS and JIC be joined? Yes, with an ORFS-to-JIC adapter. The two systems never seal directly — the adapter provides the O-ring face on one side and the 37° flare on the other.
Does an adapter reduce the pressure rating? An adapter carries its own rating, and the assembly is limited by the lowest-rated component. Confirm the rating for your size and standard before release.
Which ends need thread sealant? Only tapered threads: NPT and BSPT. JIC, ORFS, ORB, and BSPP seal at a seat or O-ring; sealant there only risks contaminating the circuit.
How do I identify an unknown thread? Measure outside diameter and pitch with a caliper and thread gauge, then check whether the thread is tapered. A thread that tightens quickly is tapered; one that runs to a hard stop is straight.
Can you supply a combination that is not in the matrix? Yes. Send both end standards, sizes, and the pressure requirement, and we will confirm the part and its lead time — most combinations are available without a new tool.
Do adapters come with the O-ring or washer? Where an end needs a sealing element, the matched O-ring or washer is supplied. Washers are single-use — order spares.
- Mangueira hidráulica2323 produtos
- Mangueira hidráulica em espiral com arame de aço66 produtos
- Mangueira hidráulica trançada com fio de aço1010 produtos
- Mangueira hidráulica reforçada com tecido33 produtos
- Mangueira hidráulica termoplástica33 produtos
- Mangueira industrial7575 produtos
- Mangueira de ar99 produtos
- Mangueira de água1111 produtos
- Mangueira de óleo1616 produtos
- Mangueira para produtos químicos66 produtos
- Mangueira composta1616 produtos
- Mangueira composta química33 produtos
- Mangueira composta para uso marítimo55 produtos
- Mangueira composta para petróleo55 produtos
- Mangueira composta para altas temperaturas11 produto
- Mangueira composta de PTFE11 produto
- Mangueira composta criogénica11 produto
- Mangueira de vapor33 produtos
- Mangueira multiusos22 produtos
- Mangueiras para alimentos e bebidas44 produtos
- Mangueira para betão44 produtos
- Mangueira para cimento22 produtos
- Mangueira para manuseamento de materiais1111 produtos
- Mangueira de dragagem44 produtos
- Acessórios hidráulicos166166 produtos
- Acessórios reutilizáveis para mangueiras66 produtos
- Acessórios para mangueiras sem encaixe88 produtos
- Acessórios hidráulicos JIC1616 produtos
- Acessórios hidráulicos métricos4141 produtos
- Acessórios hidráulicos NPT66 produtos
- Acessórios hidráulicos BSP2626 produtos
- Racores hidráulicos SAE3030 produtos
- Acessórios hidráulicos Banjo44 produtos
- Acessórios hidráulicos ORFS1111 produtos
- Virola1111 produtos
- Acessórios de flange2626 produtos
- Acessórios de peça única2424 produtos
- Adaptadores hidráulicos149149 produtos
Enviar um e-mail
henghua@hhgpipe.com
Fazer uma chamada
+15822925523
86-22-83859963
Seg. a Dom.: das 09:00 às 22:00
Sede
Tianjin, China
Edifício Hezhong, Rua Youyi Norte











