Hydraulic Hose Ferrule

Why Buy Your Hydraulic Hose Ferrule from Us

Three questions decide whether a ferrule solves your problem: fit, durability, and service. Here is how we answer each one.

1. Fit — “will it match my hose?”

• Full coverage of SAE, DIN, and ISO hose families: 1SN, 2SN, R7, 4SP/4SH, R12, and PTFE
• Dash sizes 03 to 32 (DN 4 to 50), with part numbers matched to hose I.D. and cover O.D.
• Confirm the right series in seconds, and never re-engineer an assembly for a missing size

2. Durability — “will it last in service?”

• Cold-formed carbon steel with precision-formed serrations for uniform crimp load
• Yellow zinc plating with at least 120 hours of neutral salt spray resistance per ISO 9227
• Stainless steel and zinc-nickel options for chemical, food, and offshore service
• Outer diameter tolerance of ±0.1 mm for stable, batch-to-batch crimp results

3. Service — “is it easy to work with?”

• Reference crimp data and die guidance supplied with every order
• Matched ferrule-and-stem sets and batch traceability on packaging
• Verified part numbers, pricing, and lead time within one business day; free samples for qualified projects

Complete Hydraulic Hose Ferrule Range

One family, ten series, every major hose standard. Choose the series that matches your hose construction:

All ferrules share one geometry: a cylindrical, hollow body with serrations or locating features on the inner bore. Length (L) is the primary matching dimension, held to ±0.5 mm. Outer diameter tolerance is ±0.1 mm, so die selection stays predictable across batches.

Key Specifications: Size, Material, and Finish

Dash size and bore. Dash size equals the hose I.D. in 1/16-inch increments: 03 = 5 mm, 04 = 6 mm, 06 = 10 mm, 08 = 12 mm, 10 = 16 mm, 12 = 20 mm, 16 = 25 mm, 20 = 32 mm, 24 = 40 mm, 32 = 50 mm. Always match the dash size to the hose I.D., then confirm the cover O.D. against the applicable standard.

Material.

• Carbon steel, cold formed: standard for the 1SN, 2SN, R7, 4SP/4SH, and R12 series
• Stainless steel: recommended for chemical, pharmaceutical, and food service
• Every grade is balanced in hardness (typically HRC 20-25) to resist cracking during crimping

Surface finish.

• Yellow zinc plating with chromate passivation: standard finish, ≥120 h salt spray per ISO 9227
• Zinc-nickel plating: offshore and high-corrosion duty
• Stainless steel: supplied unplated with a clean, hygienic surface

Crimping Tools and Installation

Recommended equipment. Every series works with standard hydraulic crimping machines and common die sets. We provide reference crimp data and die selection for your machine model with every order, so no special tooling is required.

Installation steps:

1. Corte a mangueira em ângulo reto com um cortador de mangueiras afiado.
2. Prepare a extremidade da mangueira de acordo com as instruções do fabricante da mangueira (faça um corte raso onde for necessário, por exemplo, 4SH e R12).
3. Insert the matching stem fully into the hose bore.
4. Deslize a virola sobre a extremidade da mangueira e encaixe-a contra o ressalto da haste.
5. Crimp to the target crimp diameter from your hose manufacturer’s crimp chart.
6. Verifique o diâmetro exterior da crimpagem com um paquímetro e registe o valor.

Two rules that prevent failures: always use the target crimp diameter from the hose maker’s chart, and never re-crimp a used ferrule. Hydraulic ferrules are single-use components. Ferrules are supplied as matched sets with our hydraulic hose fittings, the recommended way to achieve consistent, certified assemblies.

Applications and Industries

• Industrial hydraulics: 1SN and 2SN series for machine tools, presses, and automation lines
• Mobile and construction equipment: 2SN, 4SP, and R12 series for excavators, loaders, and mining machinery
• Agriculture: 1SN and 2SN series for implements and irrigation systems
• Food and beverage, chemical, pharmaceutical: PTFE series in stainless steel
• Marine and offshore: 1SN and 2SN series with zinc-nickel plating
• Oil and gas: 4SP and R12 series for high-pressure transfer lines
• Control circuits and lubrication: R7 series for low-pressure thermoplastic service
• Steam and hot media: PTFE series for aggressive and high-temperature lines

Selection note. The 00210 series is built for general industrial service and is not recommended for engineering machinery with extreme pressure spikes. For excavator, loader, and mining duty, use the 00200 or 03310 series instead. We state this honestly so you select the right part the first time.

How to Select the Right Hydraulic Hose Ferrule

Selecting a ferrule takes three checks:

1. Hose construction. Identify the hose standard — 1SN, 2SN, R7, 4SP/4SH, R12, or PTFE — and choose the matching series. Never mix series across constructions.
2. Dash size. Match the dash size to the hose I.D. (03 = 5 mm and so on), then confirm the cover O.D. against the standard.
3. Crimp data. Cross-check the target crimp diameter on your hose maker’s crimp chart before production.

Not sure? Send us the hose brand, dash size, construction, and crimp machine model. Our engineers confirm the correct part number and crimp data before you order.

Ordering and Packaging

• Unit of measure: sold per piece (EA), packed in boxes per size
• MOQ: one box per size; mixed-size sample kits available
• Customization: stainless steel material, zinc-nickel plating, private labeling, special packaging
• Export packing: corrugated cartons with moisture barrier for sea freight