BSP Female Multiseal 90° Elbow: 22191 Series

90 degree elbow bsp female multiseal fitting 22191 series spec

Why This BSP Female Multiseal Elbow Passes the Compliance Gate

A BSP female multiseal 90° elbow terminates a braided hydraulic hose with a right-angle turn and connects it to a male BSPP stud through a multiseal sealing seat. The 22191 series from HENGHUA is a one-piece crimp elbow with G-series parallel threads from G1/8″ to G2″, covering 22 sizes from -03 to -32. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this elbow is a compliance gate; for maintenance teams it is the multiseal termination for right-angle routing on equipment that uses elastomeric-seal BSPP studs.

  • BSPP multiseal female end: the parallel G thread (ISO 228-1) terminates in a spherical (radiused) sealing seat per the drawing, designed for multiseal-type elastomeric sealing with the mating male stud. The seal element is carried by the stud side or supplied with the fitting, depending on your order configuration.
  • 90° crimp elbow for braided hose: the one-piece body turns the hose axis by 90°, and the stem is engineered for braided constructions; for spiral hose, order the 22192 series.
  • Full size coverage: from the smallest G1/8″ end up to G2″, the series covers the practical range of this sealing family on mobile and industrial equipment.
  • Verificação do portão OEM: full dimensional and material conformance with thread form per ISO 228-1, and material test reports (MTR) available for every batch.

Principais vantagens

  1. Elastomeric multiseal sealing: the spherical seat works with a multiseal-type ring to absorb minor misalignment, giving a forgiving joint in field assembly.
  2. 22 sizes across G1/8″ to G2″: one series covers the full range from small control circuits to large return lines.
  3. Intervalo de funcionamento de -40 °C a +120 °C: suited to return, pressure, and cooler circuits across mobile and industrial equipment.
  4. Opções de ensaio de névoa salina de 96 a 1000 h: zinco trivalente (96 h), zinco-níquel (720 h) ou Dacromet (1000 h), de acordo com o seu ambiente.

Especificações Técnicas

What Is a BSP Female Multiseal 90° Elbow?

This elbow terminates a braided hose with a BSPP multiseal connection, the elastomeric-seal family of parallel British threads used on equipment where a positive, forgiving seal is preferred over metal cone contact. On the port end, the fitting carries a BSPP parallel thread (G series, thread form per ISO 228-1) and a spherical sealing seat per the drawing. The G thread is parallel and does not seal by itself; it only draws the joint together. The sealing element is a multiseal-type elastomeric ring, normally carried by the mating male stud, which compresses against the spherical seat of this female end when the joint is tightened.

The spherical seat is the design point of this family: a radiused face gives the seal ring a stable line of contact and tolerates small angular misalignment between the fitting and the port, which helps in tight installations where the stud cannot be perfectly aligned. This is what separates the multiseal family from the other two BSPP female systems: a 60° cone seat seals metal-to-metal against a male cone, and a flat seat seals by compressing a bonded washer or O-ring against a flat face. All three use the same G thread form but different sealing geometry, so the female end and the male stud must belong to the same family.

On the hose end, the elbow is a crimp termination for braided hose. The 90° angle turns the hose run at a right angle to the port axis, which is the standard geometry when the port faces a direction the hose cannot approach in a straight line. Typical positions are cylinder ports, valve blocks, pump outlets, and filter heads. This series is the 90° counterpart of the 22141 series 45° elbow: the same sealing family and hose range, with a different body angle for a different routing need. The series covers 22 sizes from -03 to -32; the -T and -W suffixes on some part numbers mark the body variants shown on the drawing and must be kept in the order code.

Dados dimensionais e roscas

Símbolo Descrição
E BSPP female thread (G series, ISO 228-1), G1/8″ to G2″
A Horizontal length from the bend centre to the hose stem end
C Depth dimension of the port sealing section per drawing
H Vertical height from the bend centre to the top of the nut end
S2 Hex across flats of the nut at the port end
Traço Hose inside diameter in 1/16″ increments (-03 to -32)
DN Hose inside diameter in millimetres (5 to 50)

Full dimension drawings with A, C, H, and S2 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.

Tabela completa de dimensões (matriz de referências) {#by-thread-size}

Read the table with your BSPP thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 22191-[thread dash]-[hose dash]: for example, 22191-12-12 has a G3/4″ thread and suits a -12 (20 mm) braided hose.

N.º da peça. Rosca E (BSPP) Diâmetro interno da mangueira DN (mm) Traço A (mm) C (mm) H (mm) S2 (mm)
22191-02-04 G1/8″x28 6 04 30 2 38.5 14
22191-04-03 G1/4″x19 5 03 27 4 35 19
22191-04-04 G1/4″x19 6 04 30 4 38.5 19
22191-04-05 G1/4″x19 8 05 33 4 41.5 19
22191-06-05 G3/8″ x 19 8 05 33 5 42 22
22191-06-06 G3/8″ x 19 10 06 35.3 5 44.8 22
22191-06-08 G3/8″ x 19 12 08 41 5 50 22
22191-08-06T G1/2″x14 10 06 35.3 6 46.8 27
22191-08-08 G1/2″x14 12 08 41 6 52 27
22191-08-10 G1/2″x14 16 10 56.5 6 58 27
22191-10-10 G5/8″ x 14 16 10 56.5 8 57.5 30
22191-10-12 G5/8″ x 14 20 12 65.4 8 67 30
22191-12-08T G3/4″ x 14 12 08 41 9.5 52 32
22191-12-10 G3/4″ x 14 16 10 56.5 9.5 58.5 32
22191-12-12 G3/4″ x 14 20 12 65.5 9.5 68 32
22191-16-12 G1″ x 11 20 12 66.2 11 68.5 41
22191-16-14 G1″ x 11 22 14 71.2 11 69.5 41
22191-16-16 G1″ x 11 25 16 76.7 11 75 41
22191-20-16T G1,1/4″ x 11 25 16 76.7 10 78 50
22191-20-20W G1,1/4″ x 11 32 20 92.3 10 85.3 50
22191-24-24W G1,1/2″ x 11 40 24 109.4 11.5 108 55
22191-32-32W G2″ x 11 50 32 133.1 15 123.8 70

The dimensions shown are for the braided-hose version. For spiral hose, use the 22192 series, whose stem is longer for the extra reinforcement layers.

Material e tratamento térmico

Artigo Opção padrão Opção Premium
Material Aço de carbono de alta resistência forjado a frio (20#/35#/45#) Aço inoxidável 304 ou 316L
Tratamento térmico Carburação e têmpera, dureza do núcleo HRC 20-28 Tratamento em solução, resistência estável à corrosão
Superfície Revestimento de zinco trivalente (96 h de ensaio de névoa salina) Zinco-níquel (720 h), Dacromet (1000 h) ou passivado
Classe Thread Série G com verificação por medidor O mesmo, com inspeção por meio do calibrador de roscas 100%

O forjamento a frio preserva o sentido dos grãos do aço, o que aumenta a resistência à fadiga sob pulsações de pressão. Cada lote submetido a tratamento térmico é submetido a um teste de dureza e os resultados são registados, pelo que o valor de dureza indicado no MTR corresponde às peças que recebe.

Pressão de funcionamento

Artigo Classificação
BSPP multiseal end Medium-to-high pressure class, size-dependent; this sealing geometry is commonly rated up to about 40 MPa (400 bar) in the small and medium sizes
Conjunto com crimpagem Governed by the hose; braided hose at these sizes typically carries about 8-40 MPa depending on construction and size
Teste de fábrica Every elbow is 100% pressure tested before shipment

The exact rating for your part number and hose combination is confirmed on the datasheet and by our engineers before shipment. The assembled joint rating also depends on the seal ring selected for the mating stud; use a ring rated for your circuit pressure and fluid.

Envelope de funcionamento de pressão-temperatura

Temperatura Retenção de pressão
-40 °C 100% de pressão nominal
-20 °C 100%
0 °C 100%
+20 °C 100%
+40 °C 100%
+60 °C 100%
+80 °C 100%
+100 °C 100%
+120 °C 100% (redução da capacidade nominal do sistema determinada pelas mangueiras e pelas juntas de elastómero, e não pela conexão)

The steel body holds full rated pressure across the whole temperature window. In a crimped assembly the working pressure is governed by the weakest component, normally the hose or the seal ring; use the hose derating curve for the system.

Seleção e Encomenda

The 22191 series covers the 90° elbow segment of BSP hydraulic hose fittings for braided hose, from -03 to -32, so most orders can be placed directly from the tables below.

How to Read the Part Number Matrix

Find your BSPP thread in the E column, then the hose dash size you use. The intersecting row gives the order code, for example a G3/8″ thread with a -06 hose gives 22191-06-06. For the sizes marked with -T or -W, keep the suffix in the order code. If your combination is not listed, send us both sizes; a custom multiseal elbow is machined on request.

Tabela de tamanhos de roscas BSPP

Use this chart to identify the thread on your port and to confirm the matching hose dash sizes. BSPP G threads are parallel; they are identified by measuring the thread outside diameter and counting the threads per inch.

Rosca BSPP (G) TPI Traço de linha Painel de instrumentos típico da Hose
G1/8″ 28 -02 -03, -04
G1/4″ 19 -04 -03, -04, -05
G3/8″ 19 -06 -05, -06, -08
G1/2″ 14 -08 -06, -08, -10
G5/8″ 14 -10 -10, -12
G3/4″ 14 -12 -08, -10, -12
G1″ 11 -16 -12, -14, -16
G1.1/4″ 11 -20 -16, -20
G1.1/2″ 11 -24 -24
G2″ 11 -32 -32

Cross Reference Service

Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, seat type, hose size, and bend angle, then confirm the exact 22191 equivalent before you place the order. The service covers multiseal fittings, BSP hydraulic hose fittings, and BSP elbows in your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.

Embalagem e Logística

Artigo Detalhe
Embalagem padrão 10 unidades por caixa (normalmente), 100 unidades por embalagem para tamanhos pequenos
Peso bruto Calculado por tamanho e confirmado na fatura pró-forma
Marcação Etiqueta na caixa com o número de peça, a quantidade e o número de lote para a inspeção à entrada
Origem Fabricado na China, fábrica HENGHUA
Documentos de exportação Fatura comercial, lista de embalagem, MTR, certificado de conformidade

Guia de Montagem e Utilização

Procedimento de crimpagem em quatro etapas

  1. Corte a mangueira em ângulo reto: utilize um cortador de mangueiras, nunca uma serra de metais nem uma rebarbadora. Uma extremidade reta e limpa é condição essencial para uma fixação uniforme da virola.
  2. Marque a profundidade de inserção: consulte a profundidade de inserção correspondente à sua série de mangueiras na ficha técnica de crimpagem e marque a linha no revestimento da mangueira.
  3. Lubrifique e insira: aplique uma camada fina de lubrificante de montagem na haste e no interior da mangueira e, em seguida, empurre o encaixe para dentro da mangueira até que a marca fique alinhada com a virola.
  4. Fazer a crimpagem e verificar: selecione a matriz de acordo com a tabela de crimpagem, efetue a crimpagem num único movimento contínuo e, em seguida, meça o diâmetro exterior da crimpagem com um paquímetro e compare com a tolerância.

Connecting the Multiseal End

Check the spherical sealing seat for nicks or scratches before assembly; a damaged seat will leak even with a new seal ring. Fit the correct multiseal-type ring onto the mating male stud, thread the stud into the BSPP female end by hand until the ring touches the seat, then tighten to the torque listed for the thread size. Orient the elbow so the hose exits in the direction the routing requires before final torque. The spherical seat tolerates small angular misalignment, but do not use that tolerance to force an oversized or damaged stud. Replace the seal ring at every disassembly; elastomeric seals are single-use in a rated joint.

Avisos relativos à instalação

  • ❌ Nunca misture acessórios e anilhas de diferentes fornecedores, mesmo que as roscas e os diâmetros das mangueiras pareçam idênticos. A geometria da haste, a dureza da anilha e os parâmetros de crimpagem diferem, e uma junta mista irá apresentar fugas ou soltar-se sob pressão.
  • ❌ Never confuse a multiseal seat with a 60° cone seat, a flat seat, or a BSPT taper thread. Each sealing family needs its matching male stud and seal element, and the systems are not interchangeable.
  • ❌ Never reuse a seal ring. The elastomeric ring is part of the rated joint and must be replaced at every assembly.
  • ❌ Never assemble on a scratched or nicked spherical seat. The seat is the sealing surface; repair or replace the fitting if it is damaged.
  • ❌ Never crimp without the matching crimp data sheet, and never recrimp a fitting after a failed attempt.
  • ❌ Do not use the elbow to force a hose into a bend tighter than its minimum bend radius; the elbow solves the port turn, but the hose still needs its rated bend radius downstream.
  • ✔ Após a montagem, submeta o circuito a um ensaio de pressão a 1,5 vezes a pressão de serviço e verifique se há fugas em todas as juntas.

Personalização OEM e rastreabilidade da qualidade

Opções de personalização

  • Personalização do tamanho e da rosca: non-standard G thread and hose combinations and special bend angles machined to your drawing.
  • Personalização do tratamento de superfícies: zinco trivalente (96 h), zinco-níquel (720 h) ou Dacromet (1000 h) — classes de resistência ao teste de névoa salina, selecionadas de acordo com o seu ambiente e as especificações de corrosão.
  • Marcação a laser: o seu logótipo, o número de peça e o código de lote marcados a laser na porca hexagonal, para garantir a rastreabilidade total no terreno.
  • Opções de materiais: Aço inoxidável 304/316L para circuitos químicos, marítimos e em contacto com alimentos, com certificados de passivação.

Sistema de Qualidade e Rastreabilidade

Cada lote segue um fluxo documentado: recebimento do aço com certificado da siderurgia → forjamento a frio → maquinagem CNC → tratamento térmico → revestimento → inspeção das roscas e dimensões segundo a norma 100% → ensaio de pressão → marcação a laser → embalagem. O número de lote indicado na caixa remete para o lote da matéria-prima, o registo do tratamento térmico e o relatório de inspeção. São fornecidos relatórios de ensaio de materiais (MTR) com cada encomenda, mediante pedido, e podem ser organizados relatórios de inspeção por entidades independentes (BV/SGS) antes do envio.

Perguntas Frequentes

Q: What is a BSP female multiseal 90° elbow? A: It is a one-piece crimp elbow for braided hose with a BSPP female port end (G series, parallel thread) and a spherical multiseal sealing seat, with a 90° body angle for right-angle routing.

Q: How does the multiseal seat seal? A: The G thread is parallel and does not seal by itself. A multiseal-type elastomeric ring carried by the mating male stud compresses against the spherical seat of this female end when the joint is tightened. Replace the ring at every assembly.

Q: What is the difference between this 90° elbow and the 22141 45° elbow? A: Both use the same BSPP multiseal seat and hose range. The difference is the body angle: 90° turns the hose at a right angle to the port, and 45° turns it by half of a right angle. Choose the angle that matches the routing geometry without forcing the hose bend radius.

Q: What hose does the 22191 series fit? A: The series is designed for braided hose in sizes -03 to -32 (DN 5 to 50). For spiral hose, order the 22192 series. Confirm your exact hose construction with our engineers, and the matching crimp data sheet will be supplied with the order.

Q: Do I need to supply the seal ring? A: The multiseal ring normally travels with the male stud you are connecting to, so check your mating part. If you need a matched seal ring set for your order, tell our engineers and we will include the correct rings with the shipment.

P: Podem fornecer-me os dados de crimpagem para a minha mangueira? R: Sim. Cada encomenda inclui a ficha técnica de crimpagem para o modelo da sua mangueira, com a profundidade de inserção, o diâmetro exterior da crimpagem e a seleção da matriz. Envie-nos a série e a marca da sua mangueira e os nossos engenheiros irão confirmar os parâmetros de crimpagem antes do envio.

Solicitar um orçamento

Tell us the BSPP thread, the hose dash size, the hose construction, and the annual quantity. Whether you need stock BSP hydraulic hose fittings for distribution or a custom multiseal elbow for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every elbow leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.

Pedido de informação sobre o nosso produto

Somos um fornecedor global de acessórios e equipamentos hidráulicos, servindo uma vasta gama de setores com uma solução de abastecimento «tudo num só local». Os nossos produtos incluem mangueiras hidráulicas, acessórios, adaptadores, acoplamentos rápidos, conectores, protetores de mangueira, equipamento hidráulico e muito mais — tudo o que precisa para garantir que as suas operações decorram de forma harmoniosa e eficiente.
Indique-nos as suas necessidades através do formulário abaixo. A nossa equipa irá responder-lhe com orientação especializada e um orçamento personalizado para garantir o bom funcionamento das suas operações.