Cotovelo de 45° com sede plana fêmea BSP: Série 22241

Why This BSP Female Flat Seat Elbow Passes the Compliance Gate
A BSP female flat seat 45° elbow terminates a braided hydraulic hose with a 45° turn and connects it to a male BSPP stud through a flat sealing face. The 22241 series from HENGHUA is a one-piece crimp elbow with G-series parallel threads from G1/4″ to G1.1/4″, covering 6 sizes from -04 to -20. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this elbow is a compliance gate; for maintenance teams it is the classic British flat-seat termination for 45° routing.
- BSPP flat seat female end: the parallel G thread (ISO 228-1) terminates in a flat sealing face, the British flat-seat practice per BS 5200. The joint seals with the seal element carried by the mating male stud, typically a bonded washer or an O-ring, compressed between the two faces.
- 45° crimp elbow for braided hose: the one-piece body turns the hose axis by 45°, and the stem is engineered for braided constructions; for spiral hose, order the 22242 series.
- Flat seat versus cone seat: unlike the 60° cone seat family, this female end seals on a flat face, which makes it the standard choice in UK and Commonwealth circuits using bonded-washer studs.
- Verificação do portão OEM: full dimensional and material conformance with thread form per ISO 228-1, and material test reports (MTR) available for every batch.
Principais vantagens
- Reliable flat-seat sealing: the flat face gives a wide, stable sealing area for the bonded washer or O-ring of the mating stud, with a simple visual check after assembly.
- 45° space-saving routing: the elbow turns the hose at 45°, keeping the bend radius of the hose intact while changing the direction of the line.
- Intervalo de funcionamento de -40 °C a +120 °C: suited to return, pressure, and cooler circuits across mobile and industrial equipment.
- Opções de ensaio de névoa salina de 96 a 1000 h: zinco trivalente (96 h), zinco-níquel (720 h) ou Dacromet (1000 h), de acordo com o seu ambiente.
Especificações Técnicas
What Is a BSP Female Flat Seat 45° Elbow?
This elbow terminates a braided hose with the British flat-seat connection, the parallel-thread system defined by BS 5200 and used across UK, Commonwealth, and Middle East hydraulic circuits. On the port end, the fitting carries a BSPP parallel thread (G series, thread form per ISO 228-1) and a flat sealing face at the bottom of the thread. The G thread is parallel and does not seal by itself; it only draws the joint together. The sealing element lives on the mating side: a male BSPP stud with a recessed cone normally carries a bonded washer, or an O-ring in the flat-seat variant, and tightening compresses that element against the flat face of this female end.
The flat face is the design point: it must stay clean and undamaged, because the washer or O-ring seats directly on it. This is what separates the flat seat family from the 60° cone seat family: a cone seat seals metal-to-metal against a male cone, while a flat seat seals by compressing an elastomer element against a flat face. The two female ends are not interchangeable, and neither is compatible with a BSPT taper thread, which seals by thread interference instead.
On the hose end, the elbow is a crimp termination for braided hose. The 45° angle changes the direction of the hose run by half of a right angle, which is the routing choice when a 90° turn is too sharp for the hose bend radius and a straight fitting cannot reach the port. Typical positions are cylinder ports, valve blocks, cooler connections, and pump outlets. The series covers six sizes from -04 to -20; the largest size carries the -W suffix shown on the drawing, and the suffix must be kept in the order code.
Dados dimensionais e roscas
| Símbolo | Descrição |
|---|---|
| E | BSPP female thread (G series, ISO 228-1), G1/4″ to G1.1/4″ |
| A | Overall length of the elbow along the hose axis direction |
| C | Depth dimension of the port end per drawing |
| H | Height from the thread end to the hose centreline |
| S2 | Hex across flats of the nut collar at the port end |
| Traço | Hose inside diameter in 1/16″ increments (-04 to -20) |
| DN | Hose inside diameter in millimetres (6 to 32) |
Full dimension drawings with A, C, H, and S2 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.
Tabela completa de dimensões (matriz de referências) {#by-thread-size}
Read the table with your BSPP thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 22241-[thread dash]-[hose dash]: for example, 22241-12-12 has a G3/4″ thread and suits a -12 (20 mm) braided hose.
| N.º da peça. | Rosca E (BSPP) | Diâmetro interno da mangueira DN (mm) | Traço | A (mm) | C (mm) | H (mm) | S2 (mm) |
|---|---|---|---|---|---|---|---|
| 22241-04-04 | G1/4″x19 | 6 | 04 | 40.9 | 8 | 18.8 | 19 |
| 22241-06-06 | G3/8″ x 19 | 10 | 06 | 45.3 | 9 | 21 | 22 |
| 22241-08-08 | G1/2″x14 | 12 | 08 | 58.9 | 10.5 | 24 | 27 |
| 22241-12-12 | G3/4″ x 14 | 20 | 12 | 77.4 | 13.5 | 30 | 32 |
| 22241-16-16 | G1″ x 11 | 25 | 16 | 82.7 | 15.5 | 31.5 | 41 |
| 22241-20-20W | G1,1/4″ x 11 | 32 | 20 | 97.3 | 15.5 | 36.6 | 50 |
The dimensions shown are for the braided-hose version. For spiral hose, use the 22242 series, whose stem is longer for the extra reinforcement layers.
Material e tratamento térmico
| Artigo | Opção padrão | Opção Premium |
|---|---|---|
| Material | Aço de carbono de alta resistência forjado a frio (20#/35#/45#) | Aço inoxidável 304 ou 316L |
| Tratamento térmico | Carburação e têmpera, dureza do núcleo HRC 20-28 | Tratamento em solução, resistência estável à corrosão |
| Superfície | Revestimento de zinco trivalente (96 h de ensaio de névoa salina) | Zinco-níquel (720 h), Dacromet (1000 h) ou passivado |
| Classe Thread | Série G com verificação por medidor | O mesmo, com inspeção por meio do calibrador de roscas 100% |
O forjamento a frio preserva o sentido dos grãos do aço, o que aumenta a resistência à fadiga sob pulsações de pressão. Cada lote submetido a tratamento térmico é submetido a um teste de dureza e os resultados são registados, pelo que o valor de dureza indicado no MTR corresponde às peças que recebe.
Pressão de funcionamento
| Artigo | Classificação |
|---|---|
| BSPP flat seat end | Medium-to-high pressure class, size-dependent; the flat-seat design of this geometry is commonly rated up to about 40 MPa (400 bar) in the small and medium sizes |
| Conjunto com crimpagem | Governed by the hose; braided hose at these sizes typically carries about 8-40 MPa depending on construction and size |
| Teste de fábrica | Every elbow is 100% pressure tested before shipment |
The exact rating for your part number and hose combination is confirmed on the datasheet and by our engineers before shipment. Note that the assembled joint rating also depends on the bonded washer or O-ring selected for the mating stud; use a seal element rated for your circuit pressure.
Envelope de funcionamento de pressão-temperatura
| Temperatura | Retenção de pressão |
|---|---|
| -40 °C | 100% de pressão nominal |
| -20 °C | 100% |
| 0 °C | 100% |
| +20 °C | 100% |
| +40 °C | 100% |
| +60 °C | 100% |
| +80 °C | 100% |
| +100 °C | 100% |
| +120 °C | 100% (redução da capacidade nominal do sistema determinada pelas mangueiras e pelas juntas de elastómero, e não pela conexão) |
The steel body holds full rated pressure across the whole temperature window. In a crimped assembly the working pressure is governed by the weakest component, normally the hose or the seal element; use the hose derating curve for the system.
Seleção e Encomenda
The 22241 series covers the flat seat segment of BSP hydraulic hose fittings for braided hose, from -04 to -20, so most orders can be placed directly from the tables below.
How to Read the Part Number Matrix
Find your BSPP thread in the E column, then the hose dash size you use. The intersecting row gives the order code, for example a G3/8″ thread with a -06 hose gives 22241-06-06. If your combination is not listed, send us both sizes; a custom BSP flat seat elbow is machined on request.
Tabela de tamanhos de roscas BSPP
Use this chart to identify the thread on your port and to confirm the matching hose dash sizes. BSPP G threads are parallel; they are identified by measuring the thread outside diameter and counting the threads per inch.
| Rosca BSPP (G) | TPI | Traço de linha | Painel de instrumentos típico da Hose |
|---|---|---|---|
| G1/4″ | 19 | -04 | -03, -04 |
| G3/8″ | 19 | -06 | -04, -05, -06 |
| G1/2″ | 14 | -08 | -06, -08 |
| G5/8″ | 14 | -10 | -08, -10 |
| G3/4″ | 14 | -12 | -08, -10, -12 |
| G1″ | 11 | -16 | -12, -16 |
| G1.1/4″ | 11 | -20 | -16, -20 |
Cross Reference Service
Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, sealing face type, hose size, and bend angle, then confirm the exact 22241 equivalent before you place the order. The service covers BSPP flat seat fittings, BSP hydraulic hose fittings, and BSP elbows in your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.
Embalagem e Logística
| Artigo | Detalhe |
|---|---|
| Embalagem padrão | 10 unidades por caixa (normalmente), 100 unidades por embalagem para tamanhos pequenos |
| Peso bruto | Calculado por tamanho e confirmado na fatura pró-forma |
| Marcação | Etiqueta na caixa com o número de peça, a quantidade e o número de lote para a inspeção à entrada |
| Origem | Fabricado na China, fábrica HENGHUA |
| Documentos de exportação | Fatura comercial, lista de embalagem, MTR, certificado de conformidade |
Guia de Montagem e Utilização
Procedimento de crimpagem em quatro etapas
- Corte a mangueira em ângulo reto: utilize um cortador de mangueiras, nunca uma serra de metais nem uma rebarbadora. Uma extremidade reta e limpa é condição essencial para uma fixação uniforme da virola.
- Marque a profundidade de inserção: consulte a profundidade de inserção correspondente à sua série de mangueiras na ficha técnica de crimpagem e marque a linha no revestimento da mangueira.
- Lubrifique e insira: aplique uma camada fina de lubrificante de montagem na haste e no interior da mangueira e, em seguida, empurre o encaixe para dentro da mangueira até que a marca fique alinhada com a virola.
- Fazer a crimpagem e verificar: selecione a matriz de acordo com a tabela de crimpagem, efetue a crimpagem num único movimento contínuo e, em seguida, meça o diâmetro exterior da crimpagem com um paquímetro e compare com a tolerância.
Connecting the Flat Seat End
Check the flat sealing face for nicks or scratches before assembly; a damaged face will leak even with a new seal element. Fit the correct bonded washer or O-ring onto the mating male stud, thread the stud into the BSPP female end by hand until the seal element touches the flat face, then tighten to the torque listed for the thread size. Replace the seal element at every disassembly; bonded washers and O-rings are single-use in a rated joint.
Avisos relativos à instalação
- ❌ Nunca misture acessórios e anilhas de diferentes fornecedores, mesmo que as roscas e os diâmetros das mangueiras pareçam idênticos. A geometria da haste, a dureza da anilha e os parâmetros de crimpagem diferem, e uma junta mista irá apresentar fugas ou soltar-se sob pressão.
- ❌ Never confuse a flat seat female end with a 60° cone seat end or a BSPT taper thread. Each sealing family needs its matching male stud and seal element, and the three are not interchangeable.
- ❌ Never reuse a bonded washer or O-ring. The seal element is part of the rated joint and must be replaced at every assembly.
- ❌ Never assemble on a scratched or nicked flat face. The face is the sealing surface; repair or replace the fitting if it is damaged.
- ❌ Never crimp without the matching crimp data sheet, and never recrimp a fitting after a failed attempt.
- ✔ Após a montagem, submeta o circuito a um ensaio de pressão a 1,5 vezes a pressão de serviço e verifique se há fugas em todas as juntas.
Personalização OEM e rastreabilidade da qualidade
Opções de personalização
- Personalização do tamanho e da rosca: non-standard G thread and hose combinations and special bend angles machined to your drawing.
- Personalização do tratamento de superfícies: zinco trivalente (96 h), zinco-níquel (720 h) ou Dacromet (1000 h) — classes de resistência ao teste de névoa salina, selecionadas de acordo com o seu ambiente e as especificações de corrosão.
- Marcação a laser: o seu logótipo, o número de peça e o código de lote marcados a laser na porca hexagonal, para garantir a rastreabilidade total no terreno.
- Opções de materiais: Aço inoxidável 304/316L para circuitos químicos, marítimos e em contacto com alimentos, com certificados de passivação.
Sistema de Qualidade e Rastreabilidade
Cada lote segue um fluxo documentado: recebimento do aço com certificado da siderurgia → forjamento a frio → maquinagem CNC → tratamento térmico → revestimento → inspeção das roscas e dimensões segundo a norma 100% → ensaio de pressão → marcação a laser → embalagem. O número de lote indicado na caixa remete para o lote da matéria-prima, o registo do tratamento térmico e o relatório de inspeção. São fornecidos relatórios de ensaio de materiais (MTR) com cada encomenda, mediante pedido, e podem ser organizados relatórios de inspeção por entidades independentes (BV/SGS) antes do envio.
Perguntas Frequentes
Q: What is a BSP female flat seat 45° elbow? A: It is a one-piece crimp elbow for braided hose with a BSPP female port end (G series, parallel thread) that seals on a flat face, per the British flat-seat practice of BS 5200, with a 45° body angle for routing.
Q: How does the flat seat seal? A: The G thread is parallel and does not seal by itself. A bonded washer or O-ring carried by the mating male stud is compressed against the flat face of this female end when the joint is tightened. Replace the seal element at every assembly.
Q: What is the difference between flat seat, 60° cone seat, and BSPT? A: A flat seat seals by compressing an elastomer element against a flat face. A 60° cone seat seals metal-to-metal between two cone faces. BSPT (R) is a taper thread that seals by thread interference. The three systems are not interchangeable.
Q: What hose does the 22241 series fit? A: The series is designed for braided hose in sizes -04 to -20 (DN 6 to 32). For spiral hose, order the 22242 series. Confirm your exact hose construction with our engineers, and the matching crimp data sheet will be supplied with the order.
Q: Do I need to supply the bonded washer or O-ring? A: The seal element normally travels with the male stud you are connecting to, so check your mating part. If you need a matched seal element set for your order, tell our engineers and we will include the correct washers or O-rings with the shipment.
P: Podem fornecer-me os dados de crimpagem para a minha mangueira? R: Sim. Cada encomenda inclui a ficha técnica de crimpagem para o modelo da sua mangueira, com a profundidade de inserção, o diâmetro exterior da crimpagem e a seleção da matriz. Envie-nos a série e a marca da sua mangueira e os nossos engenheiros irão confirmar os parâmetros de crimpagem antes do envio.
Solicitar um orçamento
Tell us the BSPP thread, the hose dash size, the hose construction, and the annual quantity. Whether you need stock BSP hydraulic hose fittings for distribution or a custom flat seat elbow for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every elbow leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.
Pedido de informação sobre o nosso produto
Somos um fornecedor global de acessórios e equipamentos hidráulicos, servindo uma vasta gama de setores com uma solução de abastecimento «tudo num só local». Os nossos produtos incluem mangueiras hidráulicas, acessórios, adaptadores, acoplamentos rápidos, conectores, protetores de mangueira, equipamento hidráulico e muito mais — tudo o que precisa para garantir que as suas operações decorram de forma harmoniosa e eficiente.
Indique-nos as suas necessidades através do formulário abaixo. A nossa equipa irá responder-lhe com orientação especializada e um orçamento personalizado para garantir o bom funcionamento das suas operações.
- Mangueira hidráulica2323 produtos
- Mangueira hidráulica em espiral com arame de aço66 produtos
- Mangueira hidráulica trançada com fio de aço1010 produtos
- Mangueira hidráulica reforçada com tecido33 produtos
- Mangueira hidráulica termoplástica33 produtos
- Mangueira industrial7575 produtos
- Mangueira de ar99 produtos
- Mangueira de água1111 produtos
- Mangueira de óleo1616 produtos
- Mangueira para produtos químicos66 produtos
- Mangueira composta1616 produtos
- Mangueira composta química33 produtos
- Mangueira composta para uso marítimo55 produtos
- Mangueira composta para petróleo55 produtos
- Mangueira composta para altas temperaturas11 produto
- Mangueira composta de PTFE11 produto
- Mangueira composta criogénica11 produto
- Mangueira de vapor33 produtos
- Mangueira multiusos22 produtos
- Mangueiras para alimentos e bebidas44 produtos
- Mangueira para betão44 produtos
- Mangueira para cimento22 produtos
- Mangueira para manuseamento de materiais1111 produtos
- Mangueira de dragagem44 produtos
- Acessórios hidráulicos166166 produtos
- Acessórios reutilizáveis para mangueiras66 produtos
- Acessórios para mangueiras sem encaixe88 produtos
- Acessórios hidráulicos JIC1616 produtos
- Acessórios hidráulicos métricos4141 produtos
- Acessórios hidráulicos NPT66 produtos
- Acessórios hidráulicos BSP2626 produtos
- Racores hidráulicos SAE3030 produtos
- Acessórios hidráulicos Banjo44 produtos
- Acessórios hidráulicos ORFS1111 produtos
- Virola1111 produtos
- Acessórios de flange2626 produtos
- Acessórios de peça única2424 produtos
- Adaptadores hidráulicos149149 produtos




