{"id":4758,"date":"2026-09-16T08:10:36","date_gmt":"2026-09-16T08:10:36","guid":{"rendered":"https:\/\/www.henghuahose.com\/?post_type=product&#038;p=4758"},"modified":"2026-09-16T09:42:07","modified_gmt":"2026-09-16T09:42:07","slug":"90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9","status":"publish","type":"product","link":"https:\/\/www.henghuahose.com\/pt\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/","title":{"rendered":"90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\/2D9 \u2014 Metric Male 24\u00b0 Cone with Loose Nut"},"content":{"rendered":"<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9-spec.jpg\" alt=\"90 degree elbow reducer tube adaptor with swivel nut hydraulic adapter 2C9\/2D9 specification and dimension chart\" \/><\/figure>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">Why This 90 Degree Elbow Reducer Tube Adaptor with Swivel Nut Passes the Compliance Gate<\/h2>\r\n\r\n\r\n\r\n<p>A swivel nut is only an advantage if it turns freely when it matters. A nut that galls on the body, or a cone seat that is off-centre by a few hundredths, turns a simple assembly into a leak hunt. Every 2C9\/2D9 elbow we produce is checked for nut freedom under load (the nut must rotate by hand after the male end has been torqued), the internal 24\u00b0 cone is measured on a profile projector, and the metric male thread is gauged 6g go \/ no-go. The nut itself is a separately manufactured component with its own inspection record, so it can be replaced without scrapping the body.<\/p>\r\n\r\n\r\n\r\n<p>The fitting is a 90\u00b0 elbow with a metric male 24\u00b0 cone stud end (DIN 2353 \/ ISO 8434-1) on one leg and a captive swivel nut with an internal 24\u00b0 cone seat on the other. &#8220;C&#8221; (2C9) is the L (light) series, &#8220;D&#8221; (2D9) is the S (heavy) series.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Core Advantages<\/h3>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li><strong>The joint can be aligned after the body is tight.<\/strong> Because the nut is captive and rotates on the body, the port connection and the tube connection are two independent operations \u2014 essential where a pre-bent tube run cannot be rotated.<\/li>\r\n<li><strong>A reducer by construction.<\/strong> The body bore is machined to step between the port size and the tube size, so one fitting replaces a nipple plus an adapter.<\/li>\r\n<li><strong>Replaceable nut.<\/strong> The swivel nut is a separate part with its own material and plating specification; a damaged nut is a cheap replacement, not a new fitting.<\/li>\r\n<li><strong>Metal-to-metal 24\u00b0 cone seat.<\/strong> No elastomer in the sealing path, so the joint tolerates temperature, aggressive fluids and shock.<\/li>\r\n<li><strong>Full L and S coverage.<\/strong> Tube 6 mm to 42 mm, L series to 31.5 MPa and S series to 63 MPa.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">Technical Specifications<\/h2>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">What Is a Reducer Tube Adaptor with Swivel Nut?<\/h3>\r\n\r\n\r\n\r\n<p>It is a 90\u00b0 forged elbow whose flow path reduces between two connections of different nominal size, with one end threaded as a metric male 24\u00b0 cone stud and the other closed by a loose (captive) nut that compresses the mating cone against the internal seat. In practice: the male stud goes into a port and is torqued; the swivel nut then picks up the tube end and is tightened separately, with the nut free to rotate to whatever position the tube run requires.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Connection 1 \u2014 Metric Male 24\u00b0 Cone Stud End<\/h3>\r\n\r\n\r\n\r\n<p>The port leg is a metric male stud with an external 24\u00b0 cone per DIN 2353 \/ ISO 8434-1 and a 6g metric thread. 2C9 uses the L series thread \u2014 M12\u00d71.5 for 6 mm through M52\u00d72 for 42 mm. 2D9 uses the S series thread, one size larger for the same tube (M14\u00d71.5 for 6 mm through M52\u00d72 for 38 mm) with a heavier wall and a higher pressure rating.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Connection 2 \u2014 Swivel Nut with Internal 24\u00b0 Cone Seat<\/h3>\r\n\r\n\r\n\r\n<p>The tube leg is closed by a captive nut with an internal 24\u00b0 cone seat. When the nut is tightened, the seat is drawn onto the matching external 24\u00b0 cone of the tube end and the seal is made metal-to-metal. The nut is intended to be turned onto the tube end while the body is held, which keeps the port joint undisturbed.<\/p>\r\n\r\n\r\n\r\n<p>This cone system is not interchangeable with the other two in common use: the 60\u00b0 cone (BSP, DIN 3861 \/ ISO 1179) and the 37\u00b0 flare (JIC, ISO 8434-2) have different included angles, contact diameters and thread forms. A joint assembled across systems may hold at low pressure and then weep at temperature.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Dimensional Data<\/h3>\r\n\r\n\r\n\r\n<p>In the drawing, <strong>E, F<\/strong> are the thread designations of the two connections, <strong>D1, D2<\/strong> the tube outside diameters, <strong>l1<\/strong> the stud length to the leg centreline, <strong>L1<\/strong> the length of the stud leg, <strong>L2<\/strong> the height of the nut leg, and <strong>S1, S2, S3<\/strong> the across-flats hexes of the body, the stud end and the swivel nut respectively.<\/p>\r\n\r\n\r\n\r\n<p>L1 and L2 lie on perpendicular axes. For a swivel-nut elbow the two directions are dimensionally different and cannot be swapped by rotating the fitting: the nut leg length determines how far the tube end projects, and the stud leg length determines the manifold stack height. Confirm the L and H directions of your installation drawing against the catalogue dimensions before ordering.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Full Dimension Table (Part Number Matrix)<\/h3>\r\n\r\n\r\n\r\n<p>Values as published in the HENGHUA catalogue drawing. Dimensions in millimetres.<\/p>\r\n\r\n\r\n\r\n<table>\r\n<thead>\r\n<tr>\r\n<th>PART NO.<\/th>\r\n<th>THREAD E, F<\/th>\r\n<th>D1, D2<\/th>\r\n<th>l1<\/th>\r\n<th>L1<\/th>\r\n<th>L2<\/th>\r\n<th>S1<\/th>\r\n<th>S2<\/th>\r\n<th>S3<\/th>\r\n<th>Pressure MPa<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr>\r\n<td>2C9-12<\/td>\r\n<td>M12\u00d71.5<\/td>\r\n<td>6<\/td>\r\n<td>12<\/td>\r\n<td>27<\/td>\r\n<td>26<\/td>\r\n<td>12<\/td>\r\n<td>14<\/td>\r\n<td>14<\/td>\r\n<td>31.5 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-14<\/td>\r\n<td>M14\u00d71.5<\/td>\r\n<td>8<\/td>\r\n<td>14<\/td>\r\n<td>29<\/td>\r\n<td>27.5<\/td>\r\n<td>12<\/td>\r\n<td>17<\/td>\r\n<td>17<\/td>\r\n<td>31.5 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-16<\/td>\r\n<td>M16\u00d71.5<\/td>\r\n<td>10<\/td>\r\n<td>15<\/td>\r\n<td>30<\/td>\r\n<td>29<\/td>\r\n<td>14<\/td>\r\n<td>19<\/td>\r\n<td>19<\/td>\r\n<td>31.5 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-18<\/td>\r\n<td>M18\u00d71.5<\/td>\r\n<td>12<\/td>\r\n<td>17<\/td>\r\n<td>32<\/td>\r\n<td>29.5<\/td>\r\n<td>17<\/td>\r\n<td>22<\/td>\r\n<td>22<\/td>\r\n<td>31.5 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-22<\/td>\r\n<td>M22\u00d71.5<\/td>\r\n<td>15<\/td>\r\n<td>21<\/td>\r\n<td>36<\/td>\r\n<td>32.5<\/td>\r\n<td>19<\/td>\r\n<td>27<\/td>\r\n<td>27<\/td>\r\n<td>31.5 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-26<\/td>\r\n<td>M26\u00d71.5<\/td>\r\n<td>18<\/td>\r\n<td>23.5<\/td>\r\n<td>41<\/td>\r\n<td>35.5<\/td>\r\n<td>24<\/td>\r\n<td>32<\/td>\r\n<td>32<\/td>\r\n<td>31.5 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-30<\/td>\r\n<td>M30\u00d72<\/td>\r\n<td>22<\/td>\r\n<td>27.5<\/td>\r\n<td>44<\/td>\r\n<td>38.5<\/td>\r\n<td>27<\/td>\r\n<td>36<\/td>\r\n<td>36<\/td>\r\n<td>31.5 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-36<\/td>\r\n<td>M36\u00d72<\/td>\r\n<td>28<\/td>\r\n<td>30.5<\/td>\r\n<td>47<\/td>\r\n<td>41.5<\/td>\r\n<td>36<\/td>\r\n<td>41<\/td>\r\n<td>41<\/td>\r\n<td>16 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-45<\/td>\r\n<td>M45\u00d72<\/td>\r\n<td>35<\/td>\r\n<td>34.5<\/td>\r\n<td>56<\/td>\r\n<td>51<\/td>\r\n<td>41<\/td>\r\n<td>50<\/td>\r\n<td>50<\/td>\r\n<td>16 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2C9-52<\/td>\r\n<td>M52\u00d72<\/td>\r\n<td>42<\/td>\r\n<td>40<\/td>\r\n<td>63<\/td>\r\n<td>56<\/td>\r\n<td>50<\/td>\r\n<td>60<\/td>\r\n<td>60<\/td>\r\n<td>16 \u2014 L series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-14<\/td>\r\n<td>M14\u00d71.5<\/td>\r\n<td>6<\/td>\r\n<td>16<\/td>\r\n<td>31<\/td>\r\n<td>27<\/td>\r\n<td>12<\/td>\r\n<td>17<\/td>\r\n<td>17<\/td>\r\n<td>63 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-16<\/td>\r\n<td>M16\u00d71.5<\/td>\r\n<td>8<\/td>\r\n<td>17<\/td>\r\n<td>32<\/td>\r\n<td>27.5<\/td>\r\n<td>14<\/td>\r\n<td>19<\/td>\r\n<td>19<\/td>\r\n<td>63 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-18<\/td>\r\n<td>M18\u00d71.5<\/td>\r\n<td>10<\/td>\r\n<td>17.5<\/td>\r\n<td>34<\/td>\r\n<td>30<\/td>\r\n<td>17<\/td>\r\n<td>22<\/td>\r\n<td>22<\/td>\r\n<td>63 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-20<\/td>\r\n<td>M20\u00d71.5<\/td>\r\n<td>12<\/td>\r\n<td>21.5<\/td>\r\n<td>38<\/td>\r\n<td>31<\/td>\r\n<td>17<\/td>\r\n<td>24<\/td>\r\n<td>24<\/td>\r\n<td>63 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-22<\/td>\r\n<td>M22\u00d71.5<\/td>\r\n<td>14<\/td>\r\n<td>22<\/td>\r\n<td>40<\/td>\r\n<td>35<\/td>\r\n<td>19<\/td>\r\n<td>27<\/td>\r\n<td>27<\/td>\r\n<td>63 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-24<\/td>\r\n<td>M24\u00d71.5<\/td>\r\n<td>16<\/td>\r\n<td>24.5<\/td>\r\n<td>43<\/td>\r\n<td>36.5<\/td>\r\n<td>24<\/td>\r\n<td>30<\/td>\r\n<td>30<\/td>\r\n<td>63 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-30<\/td>\r\n<td>M30\u00d72<\/td>\r\n<td>20<\/td>\r\n<td>26.5<\/td>\r\n<td>48<\/td>\r\n<td>44.5<\/td>\r\n<td>27<\/td>\r\n<td>36<\/td>\r\n<td>36<\/td>\r\n<td>40 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-36<\/td>\r\n<td>M36\u00d72<\/td>\r\n<td>25<\/td>\r\n<td>30<\/td>\r\n<td>54<\/td>\r\n<td>50<\/td>\r\n<td>36<\/td>\r\n<td>46<\/td>\r\n<td>46<\/td>\r\n<td>40 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-42<\/td>\r\n<td>M42\u00d72<\/td>\r\n<td>30<\/td>\r\n<td>35.5<\/td>\r\n<td>62<\/td>\r\n<td>55<\/td>\r\n<td>41<\/td>\r\n<td>50<\/td>\r\n<td>50<\/td>\r\n<td>40 \u2014 S series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2D9-52<\/td>\r\n<td>M52\u00d72<\/td>\r\n<td>38<\/td>\r\n<td>41<\/td>\r\n<td>72<\/td>\r\n<td>63<\/td>\r\n<td>50<\/td>\r\n<td>60<\/td>\r\n<td>60<\/td>\r\n<td>31.5 \u2014 S series<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Thread Size and Dash Chart<\/h3>\r\n\r\n\r\n\r\n<table>\r\n<thead>\r\n<tr>\r\n<th>Tube OD (D1, D2)<\/th>\r\n<th>L series (2C9) thread<\/th>\r\n<th>S series (2D9) thread<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr>\r\n<td>6 mm<\/td>\r\n<td>M12\u00d71.5<\/td>\r\n<td>M14\u00d71.5<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>8 mm<\/td>\r\n<td>M14\u00d71.5<\/td>\r\n<td>M16\u00d71.5<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>10 mm<\/td>\r\n<td>M16\u00d71.5<\/td>\r\n<td>M18\u00d71.5<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>12 mm<\/td>\r\n<td>M18\u00d71.5<\/td>\r\n<td>M20\u00d71.5<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>14 mm<\/td>\r\n<td>\u2014<\/td>\r\n<td>M22\u00d71.5<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>15 mm<\/td>\r\n<td>M22\u00d71.5<\/td>\r\n<td>\u2014<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>16 mm<\/td>\r\n<td>\u2014<\/td>\r\n<td>M24\u00d71.5<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>18 mm<\/td>\r\n<td>M26\u00d71.5<\/td>\r\n<td>\u2014<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>20 mm<\/td>\r\n<td>\u2014<\/td>\r\n<td>M30\u00d72<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>22 mm<\/td>\r\n<td>M30\u00d72<\/td>\r\n<td>\u2014<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>25 mm<\/td>\r\n<td>\u2014<\/td>\r\n<td>M36\u00d72<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>28 mm<\/td>\r\n<td>M36\u00d72<\/td>\r\n<td>\u2014<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>30 mm<\/td>\r\n<td>\u2014<\/td>\r\n<td>M42\u00d72<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>35 mm<\/td>\r\n<td>M45\u00d72<\/td>\r\n<td>\u2014<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>38 mm<\/td>\r\n<td>\u2014<\/td>\r\n<td>M52\u00d72<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>42 mm<\/td>\r\n<td>M52\u00d72<\/td>\r\n<td>\u2014<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n\r\n\r\n\r\n<p>As with the whole DIN 2353 system, the heavy (S) series uses one thread size larger than the light (L) series for the same tube OD. The swivel nut thread follows the same size rule.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Material and Heat Treatment<\/h3>\r\n\r\n\r\n\r\n<p>Bodies and swivel nuts are carbon steel, forged or machined from bar, hardened according to pressure class and finished in trivalent chromium or zinc-nickel, with the nut plated in the same batch as its body so that the two do not gall or show a colour mismatch. Stainless 304 \/ 316L is available to order. The swivel nut can be specified separately if a different material or a locking feature is required.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Working Pressure and Operating Envelope<\/h3>\r\n\r\n\r\n\r\n<p>The pressure column is the working pressure for the L or S series connection, not a burst pressure; a 4:1 burst ratio is typical of the body. The lower-rated of the two connections governs the assembly, and the tube wall thickness sets a further limit \u2014 the swivel nut joint is rated together with the tube end it compresses.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Temperature Range<\/h3>\r\n\r\n\r\n\r\n<p>NBR-based seals in associated components: \u221240 \u00b0C to +120 \u00b0C. FKM: \u221220 \u00b0C to +200 \u00b0C. The 24\u00b0 cone joint has no elastomer in the sealing path; the limit is normally set by the tube end and by the plating.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">How to Read the Part Number Matrix<\/h2>\r\n\r\n\r\n\r\n<p><code>2C9-12<\/code> is family 2C9 (elbow, swivel nut, L series), size 12 = 6 mm tube \/ M12\u00d71.5 at the stud end. <code>2D9-14<\/code> is the S series equivalent: 6 mm tube, M14\u00d71.5. The suffix follows the series, not the tube in millimetres, so the same tube appears under two different numbers. Quote the tube OD, the thread and the series when cross-referencing an OEM number.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">Selection and Ordering<\/h2>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Selection Checklist \/ Decision Table<\/h3>\r\n\r\n\r\n\r\n<table>\r\n<thead>\r\n<tr>\r\n<th>Requirement<\/th>\r\n<th>Choose<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr>\r\n<td>Tube must be aligned after the port joint is tight<\/td>\r\n<td>Any swivel-nut family, including 2C9\/2D9<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Standard pressure, tube 6\u201322 mm<\/td>\r\n<td>2C9 (L series)<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>High pressure, tube 6\u201316 mm<\/td>\r\n<td>2D9 (S series)<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Different sizes at port and tube<\/td>\r\n<td>Reducer version of this family \u2014 specify both ends<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Port is metric male 24\u00b0 cone on both sides<\/td>\r\n<td>1C9\/1D9 elbow<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Port is BSPT<\/td>\r\n<td>1CT9-SP\/1DT9-SP<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Cross Reference Service<\/h3>\r\n\r\n\r\n\r\n<p>Send the OEM number, the two thread sizes, the tube ODs or a photograph of the assembly. We return a mapped part number with both leg dimensions filled in, and confirm which leg carries the swivel nut.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Packaging and Logistics<\/h3>\r\n\r\n\r\n\r\n<p>The swivel nut is supplied fitted to the body and staked so it cannot be lost in transit but still rotates freely on arrival. Standard export packing with thread protectors, cartons and pallets; certificates referenced to the heat number.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">Installation and Fitment Guide<\/h2>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Step-by-Step Assembly<\/h3>\r\n\r\n\r\n\r\n<ol class=\"wp-block-list\">\r\n<li>Verify the port cone is metric 24\u00b0 (DIN 2353 \/ ISO 8434-1) and the thread matches the series ordered.<\/li>\r\n<li>Clean the stud cone and the port seat. Remove swarf, paint and old sealant.<\/li>\r\n<li>Lubricate the stud thread lightly. Never apply sealant to the 24\u00b0 cone.<\/li>\r\n<li>Screw the stud into the port by hand, then tighten to the stud torque while holding the body hex (S1).<\/li>\r\n<li>Present the tube end to the swivel nut. The nut is free to rotate; hold the body and turn the nut by hand until it is snug.<\/li>\r\n<li>Tighten the swivel nut to its own torque with a second wrench, holding the body so the port joint is not disturbed.<\/li>\r\n<li>Pressurise, check the port joint and the nut joint separately, and re-check after the first thermal cycle.<\/li>\r\n<\/ol>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Torque and Sealing Notes<\/h3>\r\n\r\n\r\n\r\n<p>The stud end and the swivel nut are two separate joints with two separate torque values. Both are metal-to-metal 24\u00b0 cone joints and neither uses sealant or tape. Under-torque leaves the cone short of full contact; over-torque deforms the cone and the port, and a deformed cone can never be recovered by tightening further. Always use two wrenches \u2014 one on the body, one on the nut or the tube end.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">Installation Warnings<\/h3>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li>Do not use the swivel nut to pull the stud into the port; they are independent joints.<\/li>\r\n<li>Do not mix 24\u00b0, 60\u00b0 and 37\u00b0 cone components.<\/li>\r\n<li>Do not use thread sealant anywhere on this fitting.<\/li>\r\n<li>Do not reuse a cone that has been over-torqued, galled or dented.<\/li>\r\n<li>Do not rotate the body after the stud joint has been torqued; use the swivel nut to align the tube instead.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">Applications and Industries<\/h2>\r\n\r\n\r\n\r\n<p>Swivel-nut elbows are used on mobile equipment, machine tools, hydraulic power units, presses, injection-moulding machines, shipboard hydraulics and test rigs \u2014 anywhere a tube run is pre-bent and cannot be rotated, or where the port and the tube differ in size. The 90 degree elbow reducer tube adaptor with swivel nut is the fitting that lets the tube side be positioned independently of the port side.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">OEM Customization and Quality Traceability<\/h2>\r\n\r\n\r\n\r\n<p>Reducer combinations (mixed port and tube sizes), special leg lengths, special nuts, locking nuts, alternative hex, stainless bodies and customer plating are produced to drawing. Incoming material verification, first-article inspection, nut-freedom checks after stud torque, thread and cone gauging, proof pressure testing on sample lots and final inspection are recorded against the order, with EN 10204 3.1 certificates on request.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">FAQ<\/h2>\r\n\r\n\r\n\r\n<p><strong>What does the swivel nut actually do?<\/strong> It lets the tube connection be made and aligned while the port joint stays tight \u2014 the two joints are independent.<\/p>\r\n\r\n\r\n\r\n<p><strong>Is the swivel nut captive?<\/strong> Yes. It is supplied on the body and cannot be lost, but it rotates freely so the tube end can be presented at any angle.<\/p>\r\n\r\n\r\n\r\n<p><strong>Does the swivel-nut joint need sealant?<\/strong> No. Sealing is by the internal 24\u00b0 cone seat against the tube end cone.<\/p>\r\n\r\n\r\n\r\n<p><strong>Can I use it as a reducer?<\/strong> Yes \u2014 the reducer version steps between a larger port thread and a smaller tube end, or the reverse. Specify both ends when ordering.<\/p>\r\n\r\n\r\n\r\n<p><strong>2C9 or 2D9?<\/strong> Same geometry, different series: L (light) for 2C9, S (heavy) for 2D9.<\/p>\r\n\r\n\r\n\r\n<p><strong>Can I replace just the nut?<\/strong> Yes. The swivel nut is a separate component and can be supplied on its own.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">Solicitar um or\u00e7amento<\/h2>\r\n\r\n\r\n\r\n<p>Send the part number, both thread sizes, the tube ODs, the material, the quantity and the working pressure. We will confirm the series, the swivel-nut configuration and the leg dimensions, and quote with the inspection documentation included.<\/p>\r\n\r\n\r\n\r\n<p><strong>Related products in this range:<\/strong> reducer tube adaptor with swivel nut 2C\/2D (straight) \u00b7 90\u00b0 elbow fittings adapter 1C9\/1D9 \u00b7 90\u00b0 elbow bulkhead fittings adapter 6C9\/6D9 \u00b7 branch tee fittings with swivel nut BC\/BD \u00b7 equal tees AC\/AD.<\/p>\r\n\r\n\r\n\r\n<p>Browse the full <a href=\"https:\/\/www.henghuahose.com\/pt\/product-category\/hydraulic-adapters\/\" target=\"_blank\" rel=\"noopener\">Hydraulic Adapters<\/a> range for the complete family, or <a href=\"https:\/\/www.henghuahose.com\/pt\/contact\/\" target=\"_blank\" rel=\"noopener\">contact us<\/a> to request a quote, mill test reports, and samples.<\/p>","protected":false},"excerpt":{"rendered":"<p>90 degree elbow reducer tube adaptor with a metric male 24\u00b0 cone stud end (DIN 2353 \/ ISO 8434-1) on one leg and a captive swivel nut with an internal 24\u00b0 cone seat on the other. The nut rotates freely on the body, so the tube connection can be made and aligned after the port joint is fully torqued. 2C9 = L series (to 31.5 MPa), 2D9 = S series (to 63 MPa); tube 6\u201342 mm, M12\u00d71.5 to M52\u00d72. Carbon steel with trivalent chromium or zinc-nickel plating, or 304\/316L. Reducer combinations, special leg lengths and replacement nuts available to drawing.<\/p>","protected":false},"featured_media":4756,"comment_status":"open","ping_status":"closed","template":"","meta":{"_surecart_dashboard_logo_width":"180px","_surecart_dashboard_show_logo":true,"_surecart_dashboard_navigation_orders":true,"_surecart_dashboard_navigation_invoices":true,"_surecart_dashboard_navigation_subscriptions":true,"_surecart_dashboard_navigation_downloads":true,"_surecart_dashboard_navigation_billing":true,"_surecart_dashboard_navigation_account":true,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[1426],"product_tag":[1477,1475,1479,1480,1478,1476],"class_list":{"0":"post-4758","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-hydraulic-adapters","7":"product_tag-2c9-12-reducer-elbow-with-loose-nut-6mm-tube","8":"product_tag-90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-2c9-2d9","9":"product_tag-captive-swivel-nut-hydraulic-elbow-adapter-replacement-nut","10":"product_tag-elbow-adapter-with-swivel-nut-for-pre-bent-tube-run","11":"product_tag-metric-24-degree-cone-swivel-nut-elbow-adapter-din-2353","12":"product_tag-swivel-nut-elbow-adapter-align-tube-after-port-tightening","13":"desktop-align-left","14":"tablet-align-left","15":"mobile-align-left","16":"ast-product-gallery-layout-horizontal-slider","17":"ast-product-tabs-layout-horizontal","19":"first","20":"instock","21":"shipping-taxable","22":"product-type-simple"},"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v24.5 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\/2D9<\/title>\n<meta name=\"description\" content=\"90\u00b0 elbow with metric male 24\u00b0 cone stud end and captive swivel nut. Align the tube after the port joint is tight. L series to 31.5 MPa, S series to 63 MPa, tube 6\u201342 mm.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.henghuahose.com\/pt\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/\" \/>\n<meta property=\"og:locale\" content=\"pt_PT\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\/2D9 \u2014 Metric Male 24\u00b0 Cone with Loose Nut\" \/>\n<meta property=\"og:description\" content=\"90\u00b0 elbow with metric male 24\u00b0 cone stud end and captive swivel nut. Align the tube after the port joint is tight. L series to 31.5 MPa, S series to 63 MPa, tube 6\u201342 mm.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.henghuahose.com\/pt\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/\" \/>\n<meta property=\"og:site_name\" content=\"HENGHUA\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-16T09:42:07+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"800\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"10 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\\\/\",\"name\":\"90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\\\/2D9\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9.jpg\",\"datePublished\":\"2026-09-16T08:10:36+00:00\",\"dateModified\":\"2026-09-16T09:42:07+00:00\",\"description\":\"90\u00b0 elbow with metric male 24\u00b0 cone stud end and captive swivel nut. Align the tube after the port joint is tight. L series to 31.5 MPa, S series to 63 MPa, tube 6\u201342 mm.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\\\/#breadcrumb\"},\"inLanguage\":\"pt-PT\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-PT\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9.jpg\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9.jpg\",\"width\":800,\"height\":800,\"caption\":\"90 degree elbow reducer tube adaptor with swivel nut hydraulic adapter 2C9\\\/2D9\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Shop\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/shop\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\\\/2D9 \u2014 Metric Male 24\u00b0 Cone with Loose Nut\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"name\":\"HENGHUA\",\"description\":\"Powering Your Industry, Worldwide.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"alternateName\":\"HENGHUA Hose\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.henghuahose.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"pt-PT\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\",\"name\":\"HENGHUA\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"pt-PT\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"width\":388,\"height\":90,\"caption\":\"HENGHUA\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\/2D9","description":"90\u00b0 elbow with metric male 24\u00b0 cone stud end and captive swivel nut. Align the tube after the port joint is tight. L series to 31.5 MPa, S series to 63 MPa, tube 6\u201342 mm.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.henghuahose.com\/pt\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/","og_locale":"pt_PT","og_type":"article","og_title":"90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\/2D9 \u2014 Metric Male 24\u00b0 Cone with Loose Nut","og_description":"90\u00b0 elbow with metric male 24\u00b0 cone stud end and captive swivel nut. Align the tube after the port joint is tight. L series to 31.5 MPa, S series to 63 MPa, tube 6\u201342 mm.","og_url":"https:\/\/www.henghuahose.com\/pt\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/","og_site_name":"HENGHUA","article_modified_time":"2026-09-16T09:42:07+00:00","og_image":[{"width":800,"height":800,"url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"10 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.henghuahose.com\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/","url":"https:\/\/www.henghuahose.com\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/","name":"90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\/2D9","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.henghuahose.com\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/#primaryimage"},"image":{"@id":"https:\/\/www.henghuahose.com\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9.jpg","datePublished":"2026-09-16T08:10:36+00:00","dateModified":"2026-09-16T09:42:07+00:00","description":"90\u00b0 elbow with metric male 24\u00b0 cone stud end and captive swivel nut. Align the tube after the port joint is tight. L series to 31.5 MPa, S series to 63 MPa, tube 6\u201342 mm.","breadcrumb":{"@id":"https:\/\/www.henghuahose.com\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/#breadcrumb"},"inLanguage":"pt-PT","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.henghuahose.com\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/"]}]},{"@type":"ImageObject","inLanguage":"pt-PT","@id":"https:\/\/www.henghuahose.com\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/#primaryimage","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9.jpg","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9.jpg","width":800,"height":800,"caption":"90 degree elbow reducer tube adaptor with swivel nut hydraulic adapter 2C9\/2D9"},{"@type":"BreadcrumbList","@id":"https:\/\/www.henghuahose.com\/product\/90-degree-elbow-reducer-tube-adaptor-with-swivel-nut-adapter-2c9-2d9\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.henghuahose.com\/"},{"@type":"ListItem","position":2,"name":"Shop","item":"https:\/\/www.henghuahose.com\/shop\/"},{"@type":"ListItem","position":3,"name":"90 Degree Elbow Reducer Tube Adaptor with Swivel Nut 2C9\/2D9 \u2014 Metric Male 24\u00b0 Cone with Loose Nut"}]},{"@type":"WebSite","@id":"https:\/\/www.henghuahose.com\/#website","url":"https:\/\/www.henghuahose.com\/","name":"HENGHUA","description":"A impulsionar o seu setor, em todo o mundo.","publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"alternateName":"HENGHUA Hose","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.henghuahose.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"pt-PT"},{"@type":"Organization","@id":"https:\/\/www.henghuahose.com\/#organization","name":"HENGHUA","url":"https:\/\/www.henghuahose.com\/","logo":{"@type":"ImageObject","inLanguage":"pt-PT","@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","width":388,"height":90,"caption":"HENGHUA"},"image":{"@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/product\/4758","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/comments?post=4758"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/media\/4756"}],"wp:attachment":[{"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/media?parent=4758"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/product_brand?post=4758"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/product_cat?post=4758"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.henghuahose.com\/pt\/wp-json\/wp\/v2\/product_tag?post=4758"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}