goodheart786@gmail.com

Coils of five flexible hose materials on a workshop bench: black rubber water hose, black EPDM coolant hose, clear blue PVC hose, orange polyurethane air hose and a stainless steel braided PTFE hose

Types of Flexible Hose Materials Explained (Rubber, PVC, PU, EPDM, PTFE)

コメントする / ブログ / By

The main types of flexible hose materials are rubber (natural rubber, SBR and EPDM), thermoplastics (PVC and polyurethane) and fluoropolymers (PTFE). Rubber, EPDM and the fibre-reinforced water hoses are vulcanised elastomers governed by the rubber hose standards. PVC, polyurethane and PTFE are thermoplastics governed by separate plastics hose standards. That one split explains most of

Types of Flexible Hose Materials Explained (Rubber, PVC, PU, EPDM, PTFE) Read More »

Three water hoses side by side on a workshop floor, a green rubber garden hose with brass garden hose thread couplings, a blue textile-reinforced delivery hose, and a black helical wire suction hose with a camlock fitting

Water Hose Types, Sizes and Materials: The Complete Guide

コメントする / ブログ / By

Water hose types are a combination of three specifications that are always chosen together: duty, size and material. By duty there are nine families — delivery, suction and discharge, washdown, potable, hot water, irrigation, lay-flat dewatering, fire service and garden. By pressure, ISO 1403 and ISO 6224 classify general-purpose water hose as Type 1 at

Water Hose Types, Sizes and Materials: The Complete Guide Read More »

different types of water hoses including a rubber garden hose, a PVC layflat hose and a wire-helix suction hose

What Are the Types of Water Hoses? Materials, Pressure Ratings and Best Uses

コメントする / ブログ / By

Pressure ratings and temperature bands below were re-checked against EN ISO 1403, ISO 7751, NFPA 1961/1962, NSF/ANSI 61 and FDA 21 CFR 177.2600. The short answer: the main types of water hoses fall into four material families (rubber, PVC, polyurethane, and TPE or latex hybrids), and each family is produced in several pressure classes and

What Are the Types of Water Hoses? Materials, Pressure Ratings and Best Uses Read More »

Cross-section of a hydraulic hose showing the inner tube, wire braid reinforcement layers, and outer cover

Types of Hydraulic Hose Explained: Uses, Construction & Selection

コメントする / ブログ / By

The main types of hydraulic hose fall into six construction families — single-wire braid, double-wire braid, spiral-wound, textile braid, thermoplastic, and PTFE — and which one belongs on a given line is decided by four numbers: working pressure, bore size, fluid temperature, and bend radius. This guide gives you the chart and the checklist together:

Types of Hydraulic Hose Explained: Uses, Construction & Selection Read More »

High-pressure oilfield hose coil with a steel union end on a drilling rig floor beneath the derrick

Petroleum & Oilfield Hose: High-Pressure Solutions Guide

コメントする / ブログ / By

An oilfield hose is a flexible, wire-reinforced line built to carry drilling fluid, cement, fracturing fluid, or well-control fluid under pressure. The working pressure depends on the duty: a rotary drilling or vibrator hose is specified from about 4,000 psi to 7,500 psi (Grade C to Grade E), a fracturing hose commonly works at 10,000–15,000

Petroleum & Oilfield Hose: High-Pressure Solutions Guide Read More »

Chart comparing continuous hydraulic hose temperature rating ranges for standard rubber hose, thermoplastic hose, high-temperature rubber hose and PTFE hose

Hydraulic Hose Temperature Rating: Limits, Charts & Selection

コメントする / ブログ / By

A hydraulic hose temperature rating is the range of fluid temperatures a hose is designed to carry continuously — for standard rubber hydraulic hose, -40°C to +100°C (-40°F to +212°F), with an intermittent allowance that usually stops around +120°C (+248°F). The three limits people search for most often are these: standard rubber hose -40°C to

Hydraulic Hose Temperature Rating: Limits, Charts & Selection Read More »

お見積りのお申し込み
お見積りのお申し込み