BSP Female 60° Cone 45° Elbow: 22641 Series

Why This BSP Female 60° Cone Elbow Passes the Compliance Gate

A BSP female 60° cone 45° elbow terminates a braided hydraulic hose with a 45° turn and connects it to a male stud with a 60° external cone through a BSPP female port. The 22641 series from HENGHUA is a one-piece crimp elbow built to ISO 8434-6, covering 17 sizes from -04 to -32 with G-series parallel threads from G1/4″ to G2″. Every unit is cold-forged from carbon steel, heat-treated, plated, and 100% pressure tested before shipment. For OEM buyers this elbow is a compliance gate; for maintenance teams it is the standard European-style 60° cone termination for tight 45° routing.

• ISO 8434-6 60° cone seat: the BSPP female end carries a 60° cone seat that seals metal-to-metal against a male 60° external cone. The G-series thread is parallel (ISO 228-1) and does not seal by itself; the cone does the sealing.
• 45° crimp elbow for braided hose: the one-piece body turns the hose axis by 45°, and the stem is engineered for braided constructions; for spiral hose, order the 22642 series.
• Series variants: the catalog covers the base 22641 type plus the -T and -W body variants shown on the drawing; keep the suffix in the part number when ordering.
• OEM gate check: full dimensional and material conformance per ISO 8434-6 and ISO 12151-6, with material test reports (MTR) available for every batch.

主な強み

1. ISO 8434-6 pressure classes: the 60° cone end is manufactured and tested per the standard (test practice ISO 19879), with the heavy-class rating size-dependent and confirmed on the datasheet.
2. 45° space-saving routing: the elbow turns the hose at 45°, keeping the bend radius of the hose intact while changing the direction of the line.
3. -40°C to +120°C operating range: the steel cone seal holds across cold-start and hot-running circuits without elastomer ageing at the joint.
4. 96 to 1000 h salt spray options: trivalent zinc (96 h), zinc-nickel (720 h), or Dacromet (1000 h), matched to your environment.

技術仕様

What Is a BSP Female 60° Cone 45° Elbow?

This elbow belongs to the 60° cone connection family defined by ISO 8434-6, the standard used widely across European and Commonwealth hydraulic equipment. On the port end, the fitting carries a BSPP parallel thread (G series, thread form per ISO 228-1) and an internal 60° cone seat. The sealing happens when a male stud with a 60° external cone is tightened into the seat: the two cone faces meet metal-to-metal, and the joint seals without O-rings or thread sealant in the standard version. The G thread is parallel, so it does not seal by interference; it only holds the connection together. This is why a 60° cone seat must never be interchanged with a BSPT taper thread, which seals by thread interference instead.

On the hose end, the elbow is a crimp termination for braided hose. The 45° angle changes the direction of the hose run by half of a right angle, which is the routing choice when a 90° turn is too sharp for the hose bend radius and a straight fitting cannot reach the port. Typical positions are cylinder ports, valve blocks, cooler connections, and pump outlets where the line must change direction while keeping a generous bend radius. The drawing shows three body variants in the series: the base 22641 type, the -T variant, and the -W variant used on the largest sizes. The suffix is part of the order code and must be kept exactly as shown.

Dimensional Data and Threads

Full dimension drawings with A, C, H, and S2 callouts are supplied as PDF and CAD (STEP/DWG) files. Because this is a crimp fitting, the two process-critical parameters are the hose insert depth and the crimp outside diameter; both are hose-series specific and are listed in the crimp data sheet that accompanies every order.

Full Dimension Table (Part Number Matrix) {#by-thread-size}

Read the table with your BSPP thread (E) and your hose size (dash). The part number is the order code; copy it directly into your inquiry or purchase order. The pattern is 22641-[thread dash]-[hose dash]: for example, 22641-12-12 has a G3/4″ thread and suits a -12 (20 mm) braided hose.

The dimensions shown are for the braided-hose version. For spiral hose, use the 22642 series, whose stem is longer for the extra reinforcement layers.

材料および熱処理

Cold forging preserves the grain flow of the steel, which raises fatigue resistance under pressure pulsation. Each heat-treatment batch is hardness-tested and recorded, so the hardness number on the MTR matches the parts you receive.

Working Pressure

The exact rating for your part number and hose combination is confirmed on the datasheet and by our engineers before shipment.

Pressure-Temperature Operating Envelope

The steel cone seal and body hold full rated pressure across the whole temperature window. In a crimped assembly the working pressure is governed by the weakest component, normally the hose; use the hose derating curve for the system, and the fitting will not be the limiting part.

選定と発注

The 22641 series covers the 45° elbow segment of BSP hydraulic hose fittings for braided hose, from -04 to -32, so most orders can be placed directly from the tables below.

部品番号マトリックスの読み方

Find your BSPP thread in the E column, then the hose dash size you use. The intersecting row gives the order code, for example a G3/8″ thread with a -06 hose gives 22641-06-06. For the sizes marked with -T or -W, keep the suffix in the order code. If your combination is not listed, send us both sizes; a custom BSP 60° cone elbow is machined on request.

BSPP Thread Size Chart

Use this chart to identify the thread on your port and to confirm the matching hose dash sizes. BSPP G threads are parallel; they are identified by measuring the thread outside diameter and counting the threads per inch.

相互参照サービス

Most maintenance teams buy against a legacy part number printed on the old drawing. Send us the OEM or distributor part number you currently use, with a photo of the fitting if possible. Our engineers identify the thread, cone angle, hose size, bend angle, and body variant, then confirm the exact 22641 equivalent before you place the order. The service covers 60° cone fittings, BSP hydraulic hose fittings, and BSPP elbows in your inventory, and interchange confirmation is free. The cross reference sheet is returned in PDF for your records.

包装・物流

組み立て・使用ガイド

4段階の圧着手順

1. ホースを直角に切る: use a hose cutter, never a hacksaw or an angle grinder. A square, clean end is the precondition for a uniform ferrule grip.
2. Mark the insert depth: read the insert depth for your hose series from the crimp data sheet and mark the line on the hose cover.
3. 潤滑して挿入する: apply a thin film of assembly lubricant to the stem and the hose bore, then push the fitting into the hose until the mark meets the ferrule.
4. 圧着し、確認する: select the die per the crimp table, crimp in one continuous stroke, then measure the crimp outside diameter with a caliper and compare with the tolerance.

Connecting the 60° Cone Seat End

Clean the internal 60° cone seat and the mating male 60° external cone with a lint-free cloth. Orient the elbow so the hose exits at the angle the routing requires, thread the male stud into the BSPP female end by hand until the cone faces touch, then tighten to the torque listed for the thread size. The 60° cone contact does the sealing, so no sealant is applied to the cone faces. If your circuit uses the O-ring variant of the ISO 8434-6 family, fit the correct O-ring before assembly; do not mix the O-ring and plain cone versions.

インストールに関する注意事項

• ❌ Never mix fittings and ferrules from different suppliers, even when the thread and hose sizes look identical. Stem geometry, ferrule hardness, and crimp parameters differ, and a mixed joint will leak or blow off under pressure.
• ❌ Never confuse G (BSPP parallel) threads with R (BSPT taper) threads. A G thread with a 60° cone seat seals by cone contact; a taper thread seals by thread interference and needs sealant. The two are not interchangeable.
• ❌ Never crimp without the matching crimp data sheet. An under-crimped joint weeps, and an over-crimped joint damages the hose reinforcement.
• ❌ Never recrimp a fitting after a failed attempt, and never reuse a fitting removed from a hose.
• ❌ Never apply sealant to the 60° cone faces. It hardens, blocks metal-to-metal contact, and contaminates the circuit.
• ✔ After assembly, pressure-test the circuit at 1.5x working pressure and inspect all joints for weepage.

OEMカスタマイズと品質トレーサビリティ

カスタマイズオプション

• Size and thread customization: non-standard G thread and hose combinations, special bend angles, and custom body variants machined to your drawing.
• Surface treatment customization: trivalent zinc (96 h), zinc-nickel (720 h), or Dacromet (1000 h) salt spray grades, selected by your environment and corrosion specification.
• Laser marking: your logo, part number, and batch code laser-marked on the hex for full field traceability.
• Material options: 304/316L stainless for chemical, marine, and food-contact circuits, with passivation certificates.

品質およびトレーサビリティ体制

Every batch follows a documented flow: incoming steel with mill certificate → cold forging → CNC machining → heat treatment → plating → 100% thread gauge and dimension inspection → pressure test → laser marking → packing. The batch number on the carton links back to the raw material lot, the heat-treatment record, and the inspection report. Material test reports (MTR) are provided with every order on request, and third-party inspection reports (BV/SGS) can be arranged before shipment.

よくある質問

Q: What is a BSP female 60° cone 45° elbow? A: It is a one-piece crimp elbow for braided hose with a BSPP female port end (G series, parallel thread) carrying an internal 60° cone seat per ISO 8434-6, and a 45° body angle for routing.

Q: How does the 60° cone seat seal? A: A male stud with a 60° external cone is tightened into the female seat, and the two cone faces meet metal-to-metal. The G thread is parallel and only holds the connection; the cone does the sealing, so no O-ring or sealant is used in the standard version.

Q: What is the difference between G and R threads? A: G (BSPP) is a parallel thread and seals with a separate sealing element such as a 60° cone seat. R (BSPT) is a taper thread and seals by thread interference, normally with sealant or tape. They are not interchangeable.

Q: What hose does the 22641 series fit? A: The series is designed for braided hose in sizes -04 to -32 (DN 6 to 50). For spiral hose, order the 22642 series. Confirm your exact hose construction with our engineers, and the matching crimp data sheet will be supplied with the order.

Q: What do the -T and -W suffixes mean? A: They mark the body variants shown on the drawing. The suffix is part of the order code and must be kept exactly as shown when ordering.

Q: Can you provide crimp data for my hose? A: Yes. Every order includes the crimp data sheet for your hose construction, with insert depth, crimp outside diameter, and die selection. Send us your hose series and brand, and our engineers will confirm the crimp parameters before shipment.

お見積りのお申し込み

Tell us the BSPP thread, the hose dash size, the hose construction, and the annual quantity. Whether you need stock BSP hydraulic hose fittings for distribution or a custom 60° cone elbow for an OEM program, the quoting process is the same. For replacement orders, send the legacy part number and a photo, and our engineers will confirm the interchange before quoting. Every elbow leaves the HENGHUA factory pressure-tested, batch-coded, and backed by a written warranty. Request your quote, crimp data sheet, or drawing pack today, and we will respond within 24 hours.