{"id":5040,"date":"2026-09-17T04:40:20","date_gmt":"2026-09-17T04:40:20","guid":{"rendered":"https:\/\/www.henghuahose.com\/?post_type=product&#038;p=5040"},"modified":"2026-09-17T05:15:26","modified_gmt":"2026-09-17T05:15:26","slug":"bspt-female-adapter-7t","status":"publish","type":"product","link":"https:\/\/www.henghuahose.com\/fr\/product\/bspt-female-adapter-7t\/","title":{"rendered":"7T BSPT Female Adapter &#8211; Straight BSPT Female to Female 7T Adapter"},"content":{"rendered":"<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/bspt-female-adapter-7t-spec.jpg\" alt=\"BSPT female hydraulic adapter 7T specification and dimension chart\" \/><\/figure>\r\n<p>&nbsp;<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">1. What a 7T Adapter Does<\/h2>\r\n\r\n\r\n\r\n<p>The 7T adapter is a straight hydraulic adapter with a BSPT female taper thread at both ends. It joins two BSPT male taper stud ends, or a taper threaded male fitting and a taper threaded male port nipple, in a straight line, and it can also step between two different BSPT sizes.<\/p>\r\n\r\n\r\n\r\n<p>The core value of this part is that each female end matches the external taper thread that enters it: the thread form, the size and the taper have to agree, because a matched thread pair is the precondition for a leak-free conversion point. A 7T adapter that is dimensionally correct accepts the male thread by hand and then tightens progressively as the taper engages.<\/p>\r\n\r\n\r\n\r\n<p>Sealing on this series follows ISO 7-1, the standard for pipe threads where the pressure-tight joint is made on the threads. The taper presses the crests of the external thread into the flanks of the internal thread, so the metal-to-metal contact along the flanks holds the fluid. Sealing therefore depends on the male thread, which must carry thread sealant or PTFE tape, and neither joint may be over-tightened, because a taper thread expands the female end as it enters and can split the wall.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">2. 7T Adapter Specifications<\/h2>\r\n\r\n\r\n\r\n<table>\r\n<thead>\r\n<tr>\r\n<th>Article<\/th>\r\n<th>Specification<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr>\r\n<td>S\u00e9rie<\/td>\r\n<td>7T<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Configuration<\/td>\r\n<td>Straight, female x female<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Thread standard<\/td>\r\n<td>ISO 7-1 taper pipe thread (BSPT)<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Thread designation<\/td>\r\n<td>Rc internal taper thread on both ends, accepting R external taper threads<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Size range<\/td>\r\n<td>Rc1\/8&#8243;X28 to Rc1&#8243;X11<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Sealing method<\/td>\r\n<td>Sealing on the thread flanks of both ends, using thread sealant or PTFE tape on the mating male threads<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Body material<\/td>\r\n<td>Carbon steel; 304 \/ 316 stainless steel on request<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Plating<\/td>\r\n<td>Trivalent chromium zinc plating (Cr3+); zinc-nickel plating on request<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Hex<\/td>\r\n<td>Hex across flats S1 as listed in 2.5<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">2.1 Connection 1 &#8211; BSPT female taper thread (end E)<\/h3>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li>Thread family: British Standard Pipe taper thread, ISO 7-1.<\/li>\r\n<li>Designation: Rc internal taper thread, for example Rc1\/4&#8243;X19.<\/li>\r\n<li>Gender: female.<\/li>\r\n<li>Sizes available on end E: Rc1\/8&#8243;X28, Rc1\/4&#8243;X19, Rc3\/8&#8243;X19, Rc1\/2&#8243;X14, Rc3\/4&#8243;X14, Rc1&#8243;X11.<\/li>\r\n<li>Sealing method: thread flank interference. The sealant or tape is applied to the male thread of the part that screws into this end, not inside the female thread.<\/li>\r\n<li>Mating part: a BSPT male stud end or hose fitting with an R external taper thread to ISO 7-1.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">2.2 Connection 2 &#8211; BSPT female taper thread (end F)<\/h3>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li>Thread family: British Standard Pipe taper thread, ISO 7-1.<\/li>\r\n<li>Designation: Rc internal taper thread, for example Rc1\/2&#8243;X14.<\/li>\r\n<li>Gender: female.<\/li>\r\n<li>Sizes available on end F: Rc1\/8&#8243;X28, Rc1\/4&#8243;X19, Rc3\/8&#8243;X19, Rc1\/2&#8243;X14, Rc3\/4&#8243;X14, Rc1&#8243;X11.<\/li>\r\n<li>Sealing method: thread flank interference, with sealant or tape applied to the male thread entering this end.<\/li>\r\n<li>Mating part: a BSPT male stud end or hose fitting with an R external taper thread to ISO 7-1, on the same axis as end E.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<p>Because both connections are female, this series works as a coupling or extension piece. It is used where a male thread has to meet another male thread, or where a taper threaded port has to be brought out to a usable female connection at a distance.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">2.3 Construction and Materials<\/h3>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li>The body is machined from bar stock on CNC lathes. Both internal taper threads are cut and checked with thread gauges before finishing.<\/li>\r\n<li>Body material options: carbon steel, 304 stainless steel, 316 stainless steel, with brass available on request.<\/li>\r\n<li>Plating options: trivalent chromium zinc plating (Cr3+) or zinc-nickel plating. Carbon steel with zinc plating suits general hydraulic service; 304 and 316 stainless steel are selected for corrosive and offshore environments.<\/li>\r\n<li>No elastomer is fitted in this series. Each joint is made on the taper thread, so the sealant or tape chosen by the installer is part of the sealing system.<\/li>\r\n<li>The hex across flats S1 is machined on the body so that the adapter can be held with a spanner while each male thread is tightened into it.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">2.4 Pressure and Temperature<\/h3>\r\n\r\n\r\n\r\n<p>Working pressure for these sizes is confirmed per order by HENGHUA engineering, based on the sealing method, thread size and material selected. No single figure applies across the range, because the strength of a taper threaded joint depends on the thread size, the wall thickness of the body and of the mating parts, and the depth of thread engagement at each end.<\/p>\r\n\r\n\r\n\r\n<p>Temperature behaviour follows the body material and the thread sealant or tape in use. Carbon steel with zinc plating is suitable for general hydraulic service, while 304 and 316 stainless steel are selected for corrosive service. Where an elastomer is used on a related series in this catalogue, the material ranges are approximately -30\u00b0C to +100\u00b0C for NBR, -20\u00b0C to +200\u00b0C for FKM and -40\u00b0C to +120\u00b0C for EPDM. These are material facts for the seals supplied across the range and help you align a seal choice with the fluid in your circuit.<\/p>\r\n\r\n\r\n\r\n<h3 class=\"wp-block-heading\">2.5 Part Number and Dimension Table<\/h3>\r\n\r\n\r\n\r\n<table>\r\n<thead>\r\n<tr>\r\n<th>PART NO.<\/th>\r\n<th>E<\/th>\r\n<th>F<\/th>\r\n<th>L<\/th>\r\n<th>S1<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr>\r\n<td>7T-02<\/td>\r\n<td>Rc1\/8&#8243;X28<\/td>\r\n<td>Rc1\/8&#8243;X28<\/td>\r\n<td>20<\/td>\r\n<td>14<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-02-04<\/td>\r\n<td>Rc1\/8&#8243;X28<\/td>\r\n<td>Rc1\/4&#8243;X19<\/td>\r\n<td>30<\/td>\r\n<td>19<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-04<\/td>\r\n<td>Rc1\/4&#8243;X19<\/td>\r\n<td>Rc1\/4&#8243;X19<\/td>\r\n<td>30<\/td>\r\n<td>19<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-04-06<\/td>\r\n<td>Rc1\/4&#8243;X19<\/td>\r\n<td>Rc3\/8&#8243;X19<\/td>\r\n<td>30<\/td>\r\n<td>22<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-04-08<\/td>\r\n<td>Rc1\/4&#8243;X19<\/td>\r\n<td>Rc1\/2&#8243;X14<\/td>\r\n<td>40<\/td>\r\n<td>27<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-06<\/td>\r\n<td>Rc3\/8&#8243;X19<\/td>\r\n<td>Rc3\/8&#8243;X19<\/td>\r\n<td>30<\/td>\r\n<td>22<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-06-08<\/td>\r\n<td>Rc3\/8&#8243;X19<\/td>\r\n<td>Rc1\/2&#8243;X14<\/td>\r\n<td>40<\/td>\r\n<td>27<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-06-12<\/td>\r\n<td>Rc3\/8&#8243;X19<\/td>\r\n<td>Rc3\/4&#8243;X14<\/td>\r\n<td>37<\/td>\r\n<td>36<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-08<\/td>\r\n<td>Rc1\/2&#8243;X14<\/td>\r\n<td>Rc1\/2&#8243;X14<\/td>\r\n<td>40<\/td>\r\n<td>27<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-08-12<\/td>\r\n<td>Rc1\/2&#8243;X14<\/td>\r\n<td>Rc3\/4&#8243;X14<\/td>\r\n<td>42<\/td>\r\n<td>36<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-12<\/td>\r\n<td>Rc3\/4&#8243;X14<\/td>\r\n<td>Rc3\/4&#8243;X14<\/td>\r\n<td>42<\/td>\r\n<td>36<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-12-16<\/td>\r\n<td>Rc3\/4&#8243;X14<\/td>\r\n<td>Rc1&#8243;X11<\/td>\r\n<td>50<\/td>\r\n<td>41<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7T-16<\/td>\r\n<td>Rc1&#8243;X11<\/td>\r\n<td>Rc1&#8243;X11<\/td>\r\n<td>50<\/td>\r\n<td>41<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n\r\n\r\n\r\n<p>Column notes: PART NO. is the ordering code for the complete adapter. E and F are the thread designations of the two female ends, where E is the first end listed and F the second. L is the overall length as drawn on this page, in millimetres. S1 is the hex across flats, in millimetres, used to hold the adapter during tightening. Confirm the exact measurement scheme against the outline drawing before you design around these figures.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">3. How to Read a 7T Part Number<\/h2>\r\n\r\n\r\n\r\n<p>The code has two parts: the series identifier and the size code. <code>7T<\/code> identifies the straight female x female BSPT series. Unlike the taper thread series that carry an <code>SP<\/code> suffix, this series is listed without a suffix, and the thread designation in the table (Rc) is what confirms the taper form.<\/p>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li><code>7<\/code> &#8211; female British Standard Pipe adapter family.<\/li>\r\n<li><code>T<\/code> &#8211; taper thread, ISO 7-1 (BSPT).<\/li>\r\n<li>No <code>9<\/code> in the series code &#8211; the body is straight, not an elbow.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<p>Two digit size codes use the standard British pipe sizes: 02 = 1\/8&#8243;, 04 = 1\/4&#8243;, 06 = 3\/8&#8243;, 08 = 1\/2&#8243;, 12 = 3\/4&#8243;, 16 = 1&#8243;. A single size code, as in 7T-06, means both ends take the same size. A two part code, as in 7T-06-12, means the ends differ: the first number is end E and the second is end F.<\/p>\r\n\r\n\r\n\r\n<p>Worked example: 7T-06-12 is a straight female x female adapter with Rc3\/8&#8243;X19 at end E, Rc3\/4&#8243;X14 at end F, an overall length L of 37 mm and a 36 mm hex across flats. Reading the code in that order matters, because the two threads are of different sizes and the part is not symmetrical.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">4. Installation and Fitment<\/h2>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li>Inspect both internal taper threads and the two mating male threads before assembly. Burrs, swarf or a previously stretched thread will not seal, and a damaged female thread is the most common cause of a weeping joint on this series.<\/li>\r\n<li>Clean the threads and apply thread sealant or PTFE tape to both male threads that will enter the adapter, keeping the sealant or tape off the first thread crest so that nothing enters the fluid path.<\/li>\r\n<li>Screw the first male thread into the adapter by hand until it seats, hold the adapter on the hex and tighten. Then fit the second male thread into the other end and tighten that joint. Work one joint at a time so that the first joint is not disturbed.<\/li>\r\n<li>Tighten to snug plus the small additional movement needed to reach the required position. Stop when resistance rises sharply: a taper thread expands the female end as it enters, and over-tightening can split the adapter wall or the port boss.<\/li>\r\n<li>Do not use the adapter to pull two misaligned male threads together. Align the parts first; a taper thread loaded sideways will weep and will not hold its position.<\/li>\r\n<li>Taper threaded joints are not designed for repeated assembly. Each reassembly distorts the thread slightly and requires fresh sealant. Replace the adapter if either internal thread shows flattening or if a thread gauge shows the taper has been drawn out.<\/li>\r\n<li>Common fitment errors and symptoms: cross-threading on the first turn, which damages both threads; too little sealant, which shows as a slow weep at the thread; over-tightening, which shows as a cracked adapter or a swollen female end; and screwing a parallel BSPP male thread into an Rc female end, which will not seal because the forms differ.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">5. Applications and Industries<\/h2>\r\n\r\n\r\n\r\n<p>Typical application tags for this series: hydraulic systems, water jetting, oil and gas, industrial equipment, construction machinery, agriculture, marine and material handling.<\/p>\r\n\r\n\r\n\r\n<ul class=\"wp-block-list\">\r\n<li>Cross-standard equipment integration. A port nipple with a taper male thread has to meet a hose end that also carries a taper male thread. This female x female adapter makes the joint in one straight part and can step between two BSPT sizes.<\/li>\r\n<li>Repair and replacement. Where a female port thread has been damaged and re-tapped, an oversized male nipple can be used with a 7T adapter to restore the original connection size at the hose end.<\/li>\r\n<li>High-pressure test benches. Test blocks fitted with male taper nipples use this adapter to present a female thread for a gauge line or a coupling, without adding an elbow to the panel.<\/li>\r\n<li>OEM assembly lines. When two male threads have to meet on a fixed axis, the adapter is specified once and repeated on every unit, so the overall length L in the table becomes part of the line designer&#8217;s envelope.<\/li>\r\n<\/ul>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">6. Replacement and Cross-Reference Guide<\/h2>\r\n\r\n\r\n\r\n<p>Identify a replacement by standard and sealing method, never by brand. This catalogue is organised by thread family and sealing method so that you can move between series without a brand reference.<\/p>\r\n\r\n\r\n\r\n<p>Measure these three things on the part you want to replace:<\/p>\r\n\r\n\r\n\r\n<ol class=\"wp-block-list\">\r\n<li>Thread size and pitch at both ends. Measure the bore of each internal thread and count threads per inch on the male thread that mates with it. In this range, 1\/8&#8243; is 28 threads per inch, 1\/4&#8243; and 3\/8&#8243; are 19, 1\/2&#8243; and 3\/4&#8243; are 14, and 1&#8243; and above are 11.<\/li>\r\n<li>Taper or parallel. Check the male thread that enters the adapter. A parallel thread holds the same diameter along its length; a taper thread measures smaller at the first thread and grows towards the shoulder. Only a taper male thread seals in an Rc female end.<\/li>\r\n<li>Sealing method. This adapter seals on the thread flanks with a sealant. If the part you are replacing seals on a 60\u00b0 cone seat, a bonded seal or an O-ring on a flat face, it belongs to a BSPP series, not to this one.<\/li>\r\n<\/ol>\r\n\r\n\r\n\r\n<table>\r\n<thead>\r\n<tr>\r\n<th>What you measure<\/th>\r\n<th>What to order<\/th>\r\n<\/tr>\r\n<\/thead>\r\n<tbody>\r\n<tr>\r\n<td>Female taper threads at both ends, straight<\/td>\r\n<td>7T series, matched size codes<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Female taper threads at both ends, 90\u00b0<\/td>\r\n<td>7T9-PK series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Male taper end plus female taper end, straight<\/td>\r\n<td>5T-SP series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Male taper end plus female taper end, 90\u00b0<\/td>\r\n<td>5T9-SP series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Male taper threads at both ends, straight<\/td>\r\n<td>1T-SP series<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>Parallel female port with a 60\u00b0 cone seat<\/td>\r\n<td>The BSPP female series in this catalogue<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">7. Ordering, Packaging and Delivery<\/h2>\r\n\r\n\r\n\r\n<p>To order, send us the series code, the full part number, both thread sizes, the seal material or sealant requirement, the plating and the quantity. A complete requirement for this series reads: 7T, part number 7T-06-12, end E Rc3\/8&#8243;X19, end F Rc3\/4&#8243;X14, carbon steel with trivalent chromium zinc plating, 1000 pieces.<\/p>\r\n\r\n\r\n\r\n<p>Parts are supplied in bulk cartons or in individual bags for distributor shelves, with labels showing the part number and both thread sizes. Sample orders and mixed cartons are available so that you can validate thread fit and length before a production order. Lead time, packing format and labelling are confirmed per order for your warehouse or your production line. Female x female adapters are also available as specials where a longer body or a different end combination is required.<\/p>\r\n\r\n\r\n\r\n<h2 class=\"wp-block-heading\">8. FAQ<\/h2>\r\n\r\n\r\n\r\n<p><strong>Q1. What is the difference between BSPP and BSPT, and can they be interchanged?<\/strong> BSPP is a parallel thread to ISO 228-1, where the joint is sealed on a 60\u00b0 cone seat, a bonded seal or an O-ring rather than on the thread. BSPT is a taper thread to ISO 7-1, where the pressure-tight joint is made on the thread flanks with a sealant. They are not interchangeable: a parallel male thread does not seal in an Rc female end, and forcing one in damages the thread.<\/p>\r\n\r\n\r\n\r\n<p><strong>Q2. What is the difference between a 60\u00b0 cone seat and a bonded seal, and which should I choose?<\/strong> Both belong to the BSPP family and neither applies to this taper threaded series. A 60\u00b0 cone seat seals by metal-to-metal contact between the cone of the stud end and the cone of the port, so it needs no separate part. A bonded seal is a metal washer with an elastomer insert that seals on a flat face. Where your circuit uses BSPP ports, choose the cone seat for higher pressures and the bonded seal for plain flat faced ports.<\/p>\r\n\r\n\r\n\r\n<p><strong>Q3. How do I identify the correct 7T size?<\/strong> Measure the bore of each female end, then measure the diameter and count the threads per inch of the male threads that will enter it, and match both ends to a row of the table in 2.5. If the ends differ, the part number carries both codes, with end E first. When in doubt, send a photo with a rule across each opening and we will identify the row for you.<\/p>\r\n\r\n\r\n\r\n<p><strong>Q4. What seal material should I select for my fluid and temperature?<\/strong> This series seals on the thread flanks and carries no elastomer, so the first choice is the thread sealant or tape, which must be compatible with the fluid. Where a related series in this catalogue uses an elastomer, NBR covers approximately -30\u00b0C to +100\u00b0C, FKM -20\u00b0C to +200\u00b0C and EPDM -40\u00b0C to +120\u00b0C. Confirm the sealant choice for your fluid with us before assembly.<\/p>\r\n\r\n\r\n\r\n<p><strong>Q5. How is the working pressure of this adapter determined?<\/strong> Working pressure is confirmed per order by HENGHUA engineering, based on the sealing method, thread size and material selected. It is not published as one figure for the range, because the strength of a taper threaded joint depends on the thread size, the wall thickness of the body and of the mating parts, and the depth of engagement at each end.<\/p>\r\n\r\n\r\n\r\n<p><strong>Q6. What is the minimum order quantity and can I get samples?<\/strong> Sample quantities are available so that you can check thread fit and length before committing to a production order. Minimum order quantity depends on the size, material and plating, and is confirmed in the quotation. Mixed cartons can be arranged for distributors who stock several sizes of this series.<\/p>\r\n\r\n\r\n\r\n<p><strong>Q7. Can a 7T adapter be used to join two male threads of different sizes?<\/strong> Yes. The series is supplied with two part numbers, such as 7T-06-12, where the first code is end E and the second is end F, so it steps from one BSPT size to another in a straight body. Both entering male threads must be BSPT taper threads to ISO 7-1 and both must be sealed with thread sealant or PTFE tape.<\/p>\r\n\r\n\r\n\r\n<p>Browse the full <a href=\"https:\/\/www.henghuahose.com\/fr\/product-category\/hydraulic-adapters\/\" target=\"_blank\" rel=\"noopener\">Adaptateurs hydrauliques<\/a> range for the complete family, or <a href=\"https:\/\/www.henghuahose.com\/fr\/contact\/\" target=\"_blank\" rel=\"noopener\">contact us<\/a> to request a quote, mill test reports, and samples.<\/p>","protected":false},"excerpt":{"rendered":"<p>The 7T adapter is a straight hydraulic adapter with BSPT female taper threads at both ends, to ISO 7-1. It joins two taper threaded male ends and can step between two BSPT sizes, sealing on the thread flanks with sealant or PTFE tape on the entering male threads. Sizes run from Rc1\/8&#8243;X28 to Rc1&#8243;X11 in carbon steel with zinc plating, or in 304 \/ 316 stainless steel.<\/p>","protected":false},"featured_media":5038,"comment_status":"open","ping_status":"closed","template":"","meta":{"_surecart_dashboard_logo_width":"180px","_surecart_dashboard_show_logo":true,"_surecart_dashboard_navigation_orders":true,"_surecart_dashboard_navigation_invoices":true,"_surecart_dashboard_navigation_subscriptions":true,"_surecart_dashboard_navigation_downloads":true,"_surecart_dashboard_navigation_billing":true,"_surecart_dashboard_navigation_account":true,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[1426],"product_tag":[1765,1727,1729,1710,1757],"class_list":{"0":"post-5040","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-hydraulic-adapters","7":"product_tag-7t-adapter","8":"product_tag-british-standard-pipe-adapter","9":"product_tag-bsp-female-adapter","10":"product_tag-bspt-adapter","11":"product_tag-thread-adapter","12":"desktop-align-left","13":"tablet-align-left","14":"mobile-align-left","15":"ast-product-gallery-layout-horizontal-slider","16":"ast-product-tabs-layout-horizontal","18":"first","19":"instock","20":"shipping-taxable","21":"product-type-simple"},"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v24.5 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>7T Adapter - Straight BSPT Female to Female Adapter<\/title>\n<meta name=\"description\" content=\"7T adapter, a straight BSPT female to female hydraulic adapter to ISO 7-1. Rc1\/8&quot; to Rc1&quot; taper threads, steel or stainless, made to drawing.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.henghuahose.com\/fr\/product\/bspt-female-adapter-7t\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"7T BSPT Female Adapter - Straight BSPT Female to Female 7T Adapter\" \/>\n<meta property=\"og:description\" content=\"7T adapter, a straight BSPT female to female hydraulic adapter to ISO 7-1. Rc1\/8&quot; to Rc1&quot; taper threads, steel or stainless, made to drawing.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.henghuahose.com\/fr\/product\/bspt-female-adapter-7t\/\" \/>\n<meta property=\"og:site_name\" content=\"HENGHUA\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-17T05:15:26+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/bspt-female-adapter-7t.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"800\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data1\" content=\"12 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/bspt-female-adapter-7t\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/bspt-female-adapter-7t\\\/\",\"name\":\"7T Adapter - Straight BSPT Female to Female Adapter\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/bspt-female-adapter-7t\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/bspt-female-adapter-7t\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/bspt-female-adapter-7t.jpg\",\"datePublished\":\"2026-09-17T04:40:20+00:00\",\"dateModified\":\"2026-09-17T05:15:26+00:00\",\"description\":\"7T adapter, a straight BSPT female to female hydraulic adapter to ISO 7-1. Rc1\\\/8\\\" to Rc1\\\" taper threads, steel or stainless, made to drawing.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/bspt-female-adapter-7t\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/bspt-female-adapter-7t\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/bspt-female-adapter-7t\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/bspt-female-adapter-7t.jpg\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/bspt-female-adapter-7t.jpg\",\"width\":800,\"height\":800,\"caption\":\"BSPT female hydraulic adapter 7T\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/bspt-female-adapter-7t\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Shop\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/shop\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"7T BSPT Female Adapter &#8211; Straight BSPT Female to Female 7T Adapter\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"name\":\"HENGHUA\",\"description\":\"Powering Your Industry, Worldwide.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"alternateName\":\"HENGHUA Hose\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.henghuahose.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\",\"name\":\"HENGHUA\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"width\":388,\"height\":90,\"caption\":\"HENGHUA\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"7T Adapter - Straight BSPT Female to Female Adapter","description":"7T adapter, a straight BSPT female to female hydraulic adapter to ISO 7-1. Rc1\/8\" to Rc1\" taper threads, steel or stainless, made to drawing.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.henghuahose.com\/fr\/product\/bspt-female-adapter-7t\/","og_locale":"fr_FR","og_type":"article","og_title":"7T BSPT Female Adapter - Straight BSPT Female to Female 7T Adapter","og_description":"7T adapter, a straight BSPT female to female hydraulic adapter to ISO 7-1. Rc1\/8\" to Rc1\" taper threads, steel or stainless, made to drawing.","og_url":"https:\/\/www.henghuahose.com\/fr\/product\/bspt-female-adapter-7t\/","og_site_name":"HENGHUA","article_modified_time":"2026-09-17T05:15:26+00:00","og_image":[{"width":800,"height":800,"url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/bspt-female-adapter-7t.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Dur\u00e9e de lecture estim\u00e9e":"12 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.henghuahose.com\/product\/bspt-female-adapter-7t\/","url":"https:\/\/www.henghuahose.com\/product\/bspt-female-adapter-7t\/","name":"7T Adapter - Straight BSPT Female to Female Adapter","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.henghuahose.com\/product\/bspt-female-adapter-7t\/#primaryimage"},"image":{"@id":"https:\/\/www.henghuahose.com\/product\/bspt-female-adapter-7t\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/bspt-female-adapter-7t.jpg","datePublished":"2026-09-17T04:40:20+00:00","dateModified":"2026-09-17T05:15:26+00:00","description":"7T adapter, a straight BSPT female to female hydraulic adapter to ISO 7-1. Rc1\/8\" to Rc1\" taper threads, steel or stainless, made to drawing.","breadcrumb":{"@id":"https:\/\/www.henghuahose.com\/product\/bspt-female-adapter-7t\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.henghuahose.com\/product\/bspt-female-adapter-7t\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.henghuahose.com\/product\/bspt-female-adapter-7t\/#primaryimage","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/bspt-female-adapter-7t.jpg","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/bspt-female-adapter-7t.jpg","width":800,"height":800,"caption":"BSPT female hydraulic adapter 7T"},{"@type":"BreadcrumbList","@id":"https:\/\/www.henghuahose.com\/product\/bspt-female-adapter-7t\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.henghuahose.com\/"},{"@type":"ListItem","position":2,"name":"Shop","item":"https:\/\/www.henghuahose.com\/shop\/"},{"@type":"ListItem","position":3,"name":"7T BSPT Female Adapter &#8211; Straight BSPT Female to Female 7T Adapter"}]},{"@type":"WebSite","@id":"https:\/\/www.henghuahose.com\/#website","url":"https:\/\/www.henghuahose.com\/","name":"HENGHUA","description":"Au service de votre secteur d'activit\u00e9, partout dans le monde.","publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"alternateName":"HENGHUA Hose","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.henghuahose.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/www.henghuahose.com\/#organization","name":"HENGHUA","url":"https:\/\/www.henghuahose.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","width":388,"height":90,"caption":"HENGHUA"},"image":{"@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product\/5040","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/comments?post=5040"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/media\/5038"}],"wp:attachment":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/media?parent=5040"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_brand?post=5040"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_cat?post=5040"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_tag?post=5040"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}