{"id":3871,"date":"2026-08-28T07:12:53","date_gmt":"2026-08-28T07:12:53","guid":{"rendered":"https:\/\/www.henghuahose.com\/?post_type=product&#038;p=3871"},"modified":"2026-08-28T07:12:55","modified_gmt":"2026-08-28T07:12:55","slug":"24291-rw-90-degree-orfs-female-o-ring-seal-fitting","status":"publish","type":"product","link":"https:\/\/www.henghuahose.com\/fr\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/","title":{"rendered":"24291-RW 90 Degree ORFS Female O-Ring Seal Fitting"},"content":{"rendered":"<p>Our 90 degree ORFS female O-ring seal fitting, series 24291-RW, is a one-piece crimp-on elbow that connects braided hydraulic hose to ORFS female ports at a right angle, with a flat face seat and a UNF female thread. It is built to the American ORFS (O-Ring Face Seal) system, where the compressed O-ring carries the seal. The range covers 9\/16&#8243;-18 to 2&#8243;-12 UNF threads, dash size -04 to -24, hose bore DN6 to DN40. Every elbow is formed in one piece, without welding, and 100% dimensionally inspected before shipment.<\/p>\n<p><strong>Conformit\u00e9 et normes :<\/strong><\/p>\n<ul>\n<li>SAE J1453 (O-ring face seal \/ ORFS system)<\/li>\n<li>ISO 8434-3 (O-ring face seal connectors)<\/li>\n<li>UNF threads (Unified National Fine, inch based)<\/li>\n<li>SAE J516 (norme de r\u00e9f\u00e9rence g\u00e9n\u00e9rale relative \u00e0 la conception des raccords pour flexibles hydrauliques)<\/li>\n<\/ul>\n<p><strong>Why buyers choose this elbow:<\/strong><\/p>\n<ul>\n<li><strong>One-piece 90 degree elbow.<\/strong>\u00a0Formed from a single forging or cold-headed blank. No weld at the bend, no weak point under impulse pressure.<\/li>\n<li><strong>The standard right-angle connection.<\/strong>\u00a0Pumps, valve blocks and cylinders use 90 degree outlets more than any other angle. This elbow covers them with one part.<\/li>\n<li><strong>ORFS flat face seat.<\/strong>\u00a0The flat seat receives the O-ring tip of the mating ORFS male connector, creating a zero-leak face seal without metal-to-metal fit-up.<\/li>\n<li><strong>Full UNF thread range.<\/strong>\u00a09\/16&#8243;-18 through 2&#8243;-12, covering the complete SAE J1453 dash grid from -04 to -24.<\/li>\n<\/ul>\n<h2>90 Degree ORFS Female O-Ring Seal Fitting Technical Specifications<\/h2>\n<p>The table below lists all 24 sizes of the 24291-RW 90 degree ORFS female O-ring seal fitting. Dimensions are in millimeters. All threads are UNF (Unified National Fine) with a flat face seat per SAE J1453. Dim. A is the horizontal distance from the nut axis to the hose-end shoulder, Dim. H is the height from the nut face to the hose axis, Dim. C is the cone zone length, and S2 is the wrench size across flats.<\/p>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>R\u00e9f\u00e9rence.<\/th>\n<th>Fil de discussion E<\/th>\n<th>Diam\u00e8tre int\u00e9rieur du tuyau DN (mm)<\/th>\n<th>Taille du tiret<\/th>\n<th>Dim. A (mm)<\/th>\n<th>Dim. H (mm)<\/th>\n<th>Dim. C (mm)<\/th>\n<th>Hex S2 (mm)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>24291-04-04RW<\/td>\n<td>9\/16&#8243;-18<\/td>\n<td>6<\/td>\n<td>-04<\/td>\n<td>30.0<\/td>\n<td>41.0<\/td>\n<td>8.5<\/td>\n<td>19<\/td>\n<\/tr>\n<tr>\n<td>24291-04-05RW<\/td>\n<td>9\/16&#8243;-18<\/td>\n<td>8<\/td>\n<td>-05<\/td>\n<td>33.0<\/td>\n<td>44.0<\/td>\n<td>8.5<\/td>\n<td>19<\/td>\n<\/tr>\n<tr>\n<td>24291-04-06RW<\/td>\n<td>9\/16&#8243;-18<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>35.3<\/td>\n<td>46.3<\/td>\n<td>8.5<\/td>\n<td>19<\/td>\n<\/tr>\n<tr>\n<td>24291-06-05TRW<\/td>\n<td>11\/16&#8243;-16<\/td>\n<td>8<\/td>\n<td>-05<\/td>\n<td>33.0<\/td>\n<td>37.5<\/td>\n<td>10.0<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>24291-06-06RW<\/td>\n<td>11\/16&#8243;-16<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>35.3<\/td>\n<td>49.8<\/td>\n<td>10.0<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>24291-06-08RW<\/td>\n<td>11\/16&#8243;-16<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>41.0<\/td>\n<td>55.0<\/td>\n<td>10.0<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>24291-08-06TRW<\/td>\n<td>13\/16&#8243;-16<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>35.3<\/td>\n<td>39.8<\/td>\n<td>11.0<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>24291-08-08RW<\/td>\n<td>13\/16&#8243;-16<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>41.0<\/td>\n<td>57.0<\/td>\n<td>11.0<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>24291-08-10RW<\/td>\n<td>13\/16&#8243;-16<\/td>\n<td>16<\/td>\n<td>-10<\/td>\n<td>56.5<\/td>\n<td>61.5<\/td>\n<td>11.0<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>24291-10-08TRW<\/td>\n<td>1&#8243;-14<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>41.0<\/td>\n<td>46.0<\/td>\n<td>13.5<\/td>\n<td>30<\/td>\n<\/tr>\n<tr>\n<td>24291-10-10RW<\/td>\n<td>1&#8243;-14<\/td>\n<td>16<\/td>\n<td>-10<\/td>\n<td>56.5<\/td>\n<td>66.0<\/td>\n<td>13.5<\/td>\n<td>30<\/td>\n<\/tr>\n<tr>\n<td>24291-10-12RW<\/td>\n<td>1&#8243;-14<\/td>\n<td>20<\/td>\n<td>-12<\/td>\n<td>65.5<\/td>\n<td>75.5<\/td>\n<td>13.5<\/td>\n<td>30<\/td>\n<\/tr>\n<tr>\n<td>24291-12-10TRW<\/td>\n<td>1.3\/16&#8243;-12<\/td>\n<td>16<\/td>\n<td>-10<\/td>\n<td>56.5<\/td>\n<td>51.5<\/td>\n<td>15.0<\/td>\n<td>36<\/td>\n<\/tr>\n<tr>\n<td>24291-12-12RW<\/td>\n<td>1.3\/16&#8243;-12<\/td>\n<td>20<\/td>\n<td>-12<\/td>\n<td>65.5<\/td>\n<td>77.0<\/td>\n<td>15.0<\/td>\n<td>36<\/td>\n<\/tr>\n<tr>\n<td>24291-12-16RW<\/td>\n<td>1.3\/16&#8243;-12<\/td>\n<td>25<\/td>\n<td>-16<\/td>\n<td>76.7<\/td>\n<td>83.5<\/td>\n<td>15.0<\/td>\n<td>36<\/td>\n<\/tr>\n<tr>\n<td>24291-16-12TRW<\/td>\n<td>1.7\/16&#8243;-12<\/td>\n<td>20<\/td>\n<td>-12<\/td>\n<td>65.5<\/td>\n<td>63.0<\/td>\n<td>14.8<\/td>\n<td>41<\/td>\n<\/tr>\n<tr>\n<td>24291-16-14TRW<\/td>\n<td>1.7\/16&#8243;-12<\/td>\n<td>22<\/td>\n<td>-14<\/td>\n<td>71.2<\/td>\n<td>63.0<\/td>\n<td>14.8<\/td>\n<td>41<\/td>\n<\/tr>\n<tr>\n<td>24291-16-16TRW<\/td>\n<td>1.7\/16&#8243;-12<\/td>\n<td>25<\/td>\n<td>-16<\/td>\n<td>76.9<\/td>\n<td>67.5<\/td>\n<td>14.8<\/td>\n<td>41<\/td>\n<\/tr>\n<tr>\n<td>24291-16-20RW<\/td>\n<td>1.7\/16&#8243;-12<\/td>\n<td>32<\/td>\n<td>-20<\/td>\n<td>91.5<\/td>\n<td>96.0<\/td>\n<td>14.8<\/td>\n<td>41<\/td>\n<\/tr>\n<tr>\n<td>24291-20-16TRW<\/td>\n<td>1.11\/16&#8243;-12<\/td>\n<td>25<\/td>\n<td>-16<\/td>\n<td>76.7<\/td>\n<td>67.5<\/td>\n<td>15.0<\/td>\n<td>50<\/td>\n<\/tr>\n<tr>\n<td>24291-20-20WRW<\/td>\n<td>1.11\/16&#8243;-12<\/td>\n<td>32<\/td>\n<td>-20<\/td>\n<td>93.0<\/td>\n<td>100.0<\/td>\n<td>15.0<\/td>\n<td>50<\/td>\n<\/tr>\n<tr>\n<td>24291-20-24WRW<\/td>\n<td>1.11\/16&#8243;-12<\/td>\n<td>40<\/td>\n<td>-24<\/td>\n<td>109.4<\/td>\n<td>113.5<\/td>\n<td>15.0<\/td>\n<td>50<\/td>\n<\/tr>\n<tr>\n<td>24291-24-20TRW<\/td>\n<td>2&#8243;-12<\/td>\n<td>32<\/td>\n<td>-20<\/td>\n<td>91.5<\/td>\n<td>78.5<\/td>\n<td>14.8<\/td>\n<td>60<\/td>\n<\/tr>\n<tr>\n<td>24291-24-24TRW<\/td>\n<td>2&#8243;-12<\/td>\n<td>40<\/td>\n<td>-24<\/td>\n<td>109.4<\/td>\n<td>92.0<\/td>\n<td>14.8<\/td>\n<td>60<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<p>Notes: The -RW suffix denotes the braided-hose version; for spiral-wound hose, use series 24292-XX-XXRW. The 24291 series is the 90 degree elbow counterpart of the 24241 45 degree elbow, the 24211 straight ORFS female fitting and the 14211 ORFS male fitting.<\/p>\n<h3>Why a One-Piece 90 Degree Elbow<\/h3>\n<p>A 90 degree outlet is the most common port direction in hydraulic systems. Pumps, valve manifolds and cylinder heads all route hoses at right angles. This 90 degree ORFS female O-ring seal fitting replaces a straight fitting plus a separate 90 degree adapter, removing two potential leak points and extra length.<\/p>\n<p>The elbow body is formed in one piece by hot forging or cold heading, then machined to tolerance. There is no welded seam at the bend. Our impulse testing found that a one-piece elbow survives pressure cycling significantly longer than a welded two-piece elbow of the same size. The compact 90 degree geometry also keeps the hose close to the machine frame, which reduces cover wear and protects the hose from snagging.<\/p>\n<h3>How the ORFS Flat Seat Works<\/h3>\n<p>The ORFS female fitting carries a flat face seat inside the threaded end. The O-ring itself lives in a groove at the tip of the mating ORFS male connector (our 14211 series). When the UNF female thread is tightened onto the male end, the male O-ring tip presses against this flat seat and the O-ring is compressed. The O-ring, not metal, carries the seal.<\/p>\n<p>This is why ORFS is called the face seal system: the seal happens on the flat face, perpendicular to the thread axis, rather than on a cone. The design tolerates surface scratches and minor nicks on the seat, withstands high impulse pressure without loosening, and can be repeatedly assembled and disassembled with a simple O-ring replacement.<\/p>\n<h3>Profondeur d'insertion et diam\u00e8tre ext\u00e9rieur du sertissage : les deux chiffres demand\u00e9s par les ing\u00e9nieurs<\/h3>\n<p>La profondeur d'insertion correspond \u00e0 la longueur de la partie cannel\u00e9e qui p\u00e9n\u00e8tre dans l'al\u00e9sage du tuyau. Le diam\u00e8tre ext\u00e9rieur apr\u00e8s sertissage correspond au diam\u00e8tre ext\u00e9rieur de la virole apr\u00e8s sertissage. Ces deux param\u00e8tres d\u00e9terminent ensemble si l'ensemble r\u00e9siste \u00e0 la pression ou pr\u00e9sente des fuites au niveau de la zone de sertissage.<\/p>\n<p>HENGHUA publie les valeurs correspondantes de profondeur d\u2019insertion et de diam\u00e8tre ext\u00e9rieur de sertissage pour chaque type de flexible que nous fournissons, y compris les mod\u00e8les SAE 100 R1AT, R2AT et EN 853 1SN \/ 2SN. Ces valeurs sont sp\u00e9cifiques \u00e0 chaque flexible, car l\u2019\u00e9paisseur du renfort influe sur l\u2019\u00e9paisseur totale. Demandez notre fiche technique de sertissage en indiquant le mod\u00e8le de votre flexible et nous vous communiquerons le diam\u00e8tre ext\u00e9rieur exact du sertissage ainsi que le choix de la matrice dans un d\u00e9lai d\u2019un jour ouvr\u00e9.<\/p>\n<p>Nos essais de production ont montr\u00e9 qu\u2019un diam\u00e8tre ext\u00e9rieur de sertissage v\u00e9rifi\u00e9 et compris dans la tol\u00e9rance publi\u00e9e (g\u00e9n\u00e9ralement \u00b1 0,2 mm) offre une marge de s\u00e9curit\u00e9 contre l\u2019\u00e9clatement de 4:1 ou plus sur l\u2019ensemble complet. Effectuez une mesure \u00e0 l\u2019aide d\u2019un pied \u00e0 coulisse num\u00e9rique apr\u00e8s chaque sertissage.<\/p>\n<h3>Mat\u00e9riaux et traitements thermiques<\/h3>\n<ul>\n<li><strong>Acier au carbone (standard) :<\/strong>\u00a0high-strength cold-headed or hot-forged carbon steel (20# \/ 35# \/ 45# grades). The tail and flat seat are case-hardened with a carburizing and quenching process for fatigue resistance. Reference hardness range is HRC 20-28 on the core with a hardened case.<\/li>\n<li><strong>Finition de surface :<\/strong>\u00a0Zingage blanc ou de couleur (jaune) avec passivation. Des rev\u00eatements en zinc-nickel et Dacromet sont disponibles en option pour r\u00e9pondre \u00e0 des exigences plus strictes en mati\u00e8re de test au brouillard salin.<\/li>\n<li><strong>Acier inoxydable (en option) :<\/strong>\u00a0304, 316 or 316L stainless steel for corrosive media and washdown environments.<\/li>\n<\/ul>\n<h3>Valeurs nominales de pression et de temp\u00e9rature<\/h3>\n<p>The connection rating follows the SAE J1453 O-ring face seal reference table below. These are reference values (\u00a7) for the fitting connection itself. The final working pressure of a hose assembly is set by the hose construction and the approved crimping specification.<\/p>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>Taille du tiret<\/th>\n<th>Diam\u00e8tre int\u00e9rieur du tuyau DN (mm)<\/th>\n<th>Reference Connection Pressure (bar)\u00a7<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>-04<\/td>\n<td>6<\/td>\n<td>345<\/td>\n<\/tr>\n<tr>\n<td>-06<\/td>\n<td>10<\/td>\n<td>345<\/td>\n<\/tr>\n<tr>\n<td>-08<\/td>\n<td>12<\/td>\n<td>345<\/td>\n<\/tr>\n<tr>\n<td>-10<\/td>\n<td>16<\/td>\n<td>275<\/td>\n<\/tr>\n<tr>\n<td>-12<\/td>\n<td>20<\/td>\n<td>200<\/td>\n<\/tr>\n<tr>\n<td>-16<\/td>\n<td>25<\/td>\n<td>200<\/td>\n<\/tr>\n<tr>\n<td>-20<\/td>\n<td>32<\/td>\n<td>135<\/td>\n<\/tr>\n<tr>\n<td>-24<\/td>\n<td>40<\/td>\n<td>135<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<p>\u00a7Reference values per SAE J1453 O-ring face seal connection classes. Confirm the assembly rating with the HENGHUA crimp data sheet matched to your hose.<\/p>\n<p><strong>Plage de temp\u00e9ratures :<\/strong>\u00a0-40\u00b0C to +100\u00b0C with the standard NBR O-ring on the mating male end. At elevated temperature, apply the standard SAE J517 style derating to the assembly working pressure.<\/p>\n<p><strong>Essais de pression :<\/strong>\u00a0HENGHUA est en mesure de fournir des ensembles ayant subi des essais de r\u00e9sistance jusqu'\u00e0 100% de la pression de service nominale, avec des certificats d'essai sur demande.<\/p>\n<h2>How to Select the Right 90 Degree ORFS Female O-Ring Seal Fitting<\/h2>\n<p>Selection is a four-step process. First, confirm the port needs a right angle. Second, match the hose bore to the dash size. Third, match the UNF thread to your port. Fourth, confirm the hose construction version (-RW for braided, 24292 series for spiral).<\/p>\n<h3>Structure des r\u00e9f\u00e9rences<\/h3>\n<p>Lisez toute r\u00e9f\u00e9rence HENGHUA en trois segments. Exemple :\u00a0<strong>24291-08-08RW<\/strong>.<\/p>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>Segment<\/th>\n<th>Valeur<\/th>\n<th>Signification<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>S\u00e9rie<\/td>\n<td>24291<\/td>\n<td>90 degree ORFS female O-ring seal<\/td>\n<\/tr>\n<tr>\n<td>Code du fil de discussion<\/td>\n<td>08<\/td>\n<td>13\/16&#8243;-16 UNF (the number is the dash code)<\/td>\n<\/tr>\n<tr>\n<td>Taille des tirets<\/td>\n<td>08<\/td>\n<td>Diam\u00e8tre int\u00e9rieur du tuyau DN12, tiret -08<\/td>\n<\/tr>\n<tr>\n<td>Suffixe<\/td>\n<td>RW<\/td>\n<td>Braided hose version (spiral hose uses 24292 series)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<h3>S\u00e9lectionner par s\u00e9rie de tuyaux<\/h3>\n<p>The 24291-RW elbow is designed for braided hydraulic hose. Recommended matching constructions:<\/p>\n<ul>\n<li>SAE 100 R1AT (tresse \u00e0 un brin) \u2013 pour les tailles de -04 \u00e0 -24<\/li>\n<li>SAE 100 R2AT (tresse \u00e0 deux fils) \u2013 pour les tailles allant de -04 \u00e0 -24<\/li>\n<li>EN 853 1SN et 2SN (constructions europ\u00e9ennes \u00e9quivalentes)<\/li>\n<\/ul>\n<h3>S\u00e9lectionner par calibre de filetage<\/h3>\n<p>The flat seat receives the O-ring tip of the mating ORFS male connector. All threads are UNF (Unified National Fine):<\/p>\n<ul>\n<li><strong>Petites tailles :<\/strong>\u00a09\/16&#8243;-18, 11\/16&#8243;-16, 13\/16&#8243;-16 (dash -04 to -08)<\/li>\n<li><strong>Tailles moyennes :<\/strong>\u00a01&#8243;-14, 1.3\/16&#8243;-12 (dash -08 to -12)<\/li>\n<li><strong>Grandes tailles :<\/strong>\u00a01.7\/16&#8243;-12, 1.11\/16&#8243;-12, 2&#8243;-12 (dash -12 to -24)<\/li>\n<\/ul>\n<p>The nut rotates freely before tightening, which lets you align the 90 degree outlet in any direction around the port axis.<\/p>\n<h3>90 Degree vs 45 Degree vs Straight &#8211; Which One Do You Need<\/h3>\n<p>Use a straight fitting when the hose leaves the port in line with the port axis. Use a 90 degree elbow when the hose must turn immediately, such as at a pump port or valve manifold edge. Use a 45 degree elbow when the hose needs a shallow angle change. When in doubt, send us a sketch of your routing and our engineers will confirm the correct angle and size within one working day.<\/p>\n<h3>R\u00e9f\u00e9rences crois\u00e9es<\/h3>\n<p>This series replaces equivalent SAE J1453 ORFS 90 degree female fittings available in the market. If you hold an OEM part number or a competitor catalog number, send it to our sales team. We confirm the direct replacement within 24 hours, including thread, dash size, hex and insert depth checks.<\/p>\n<h3>Emballage et logistique<\/h3>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>Article<\/th>\n<th>Emballage standard pour l'exportation<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Unit\u00e9 d'emballage<\/td>\n<td>10 pi\u00e8ces par bo\u00eete int\u00e9rieure (petites tailles), 5 pi\u00e8ces par bo\u00eete (grandes tailles)<\/td>\n<\/tr>\n<tr>\n<td>Carton d'emballage ext\u00e9rieur<\/td>\n<td>Carton ondul\u00e9 \u00e0 5 couches de qualit\u00e9 export, 10 bo\u00eetes par carton<\/td>\n<\/tr>\n<tr>\n<td>Poids<\/td>\n<td>Poids net et brut par taille, tels qu'indiqu\u00e9s dans notre devis<\/td>\n<\/tr>\n<tr>\n<td>Origine<\/td>\n<td>Chine (usine de HENGHUA)<\/td>\n<\/tr>\n<tr>\n<td>D\u00e9lai de livraison<\/td>\n<td>Les articles en stock sont exp\u00e9di\u00e9s sous 7 jours ; les articles fabriqu\u00e9s sur commande, sous 15 \u00e0 25 jours.<\/td>\n<\/tr>\n<tr>\n<td>Paiement<\/td>\n<td>Paiement par virement bancaire (T\/T), lettre de cr\u00e9dit (L\/C) et assurance commerciale accept\u00e9s<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<h2>Guide de montage : quatre \u00e9tapes pour un montage s\u00fbr du tuyau<\/h2>\n<p>Follow this process for every crimped assembly. It applies to every 90 degree ORFS female O-ring seal fitting size from dash -04 to -24. Skipping one step is the most common cause of early fitting failure.<\/p>\n<p><strong>\u00c9tape 1 \u2013 Coupez le tuyau \u00e0 angle droit.<\/strong>\u00a0Utilisez un coupe-tuyau bien aff\u00fbt\u00e9. Une coupe \u00e0 bords droits permet au raccord de s'embo\u00eeter uniform\u00e9ment dans le tuyau. Une coupe biseaut\u00e9e ou irr\u00e9guli\u00e8re laisse des espaces vides qui peuvent devenir des points de fuite.<\/p>\n<p><strong>\u00c9tape 2 \u2013 Marquez la profondeur d'insertion.<\/strong>\u00a0Mesurez la profondeur d'insertion indiqu\u00e9e dans la fiche technique de sertissage HENGHUA. Tracez une ligne sur la gaine du tuyau \u00e0 cette distance. Le rep\u00e8re doit rester visible apr\u00e8s l'insertion.<\/p>\n<p><strong>\u00c9tape 3 \u2013 Lubrifiez et ins\u00e9rez.<\/strong>\u00a0Appliquez une fine couche de lubrifiant de montage compatible \u00e0 l'int\u00e9rieur du tuyau et sur l'extr\u00e9mit\u00e9 cannel\u00e9e du raccord. Enfoncez le raccord en effectuant un mouvement de rotation jusqu'\u00e0 ce que le rep\u00e8re de profondeur s'aligne avec l'extr\u00e9mit\u00e9 du raccord. Arr\u00eatez-vous au niveau du rep\u00e8re. Ne forcez pas au-del\u00e0.<\/p>\n<p><strong>\u00c9tape 4 \u2013 Sertir et v\u00e9rifier.<\/strong>\u00a0Select the correct die set for your hose and fitting size. Crimp in one continuous stroke. After crimping, measure the crimp O.D. with a digital caliper and compare it with the tolerance on the crimp data sheet. Record the value on your quality log. Then align the nut and tighten it to the torque value on the data sheet.<\/p>\n<h3>Consignes de s\u00e9curit\u00e9 \u2013 \u00c0 lire avant de proc\u00e9der au sertissage<\/h3>\n<ul>\n<li><strong>Ne m\u00e9langez jamais les marques.<\/strong>\u00a0Les flexibles et les raccords de diff\u00e9rents fabricants peuvent pr\u00e9senter les m\u00eames dimensions, mais utiliser des param\u00e8tres de sertissage diff\u00e9rents. Veillez \u00e0 toujours utiliser un ensemble flexible, raccord et fiche technique de sertissage compatibles.<\/li>\n<li><strong>Never seal the ORFS flat seat with tape.<\/strong>\u00a0The O-ring on the mating male end carries the seal. Thread sealant tape or paste on the seat destroys the seal.<\/li>\n<li><strong>Keep the flat seat clean and undamaged.<\/strong>\u00a0A burr or deep scratch on the seat can cut the O-ring during assembly. Protect the seat during handling and storage.<\/li>\n<li><strong>Do not confuse ORFS with JIC.<\/strong>\u00a0ORFS seals on a flat face with an O-ring; JIC seals with a 37 degree flare cone. The threads may be similar, but the sealing geometry is completely different.<\/li>\n<li><strong>Align the nut before final tightening.<\/strong>\u00a0Rotate the 90 degree outlet to its final direction, then tighten. Do not use the hose to twist the nut into position after tightening.<\/li>\n<li><strong>Never reuse a crimped fitting.<\/strong>\u00a0Once crimped, the ferrule zone is work-hardened. A re-crimp cannot restore the original grip.<\/li>\n<\/ul>\n<h2>OEM Customization and Quality Traceability<\/h2>\n<p>HENGHUA supplies not only standard sizes but also fully customized 90 degree ORFS female O-ring seal fitting solutions for OEM programs.<\/p>\n<h3>Customization Services<\/h3>\n<ul>\n<li><strong>Angle and thread customization.<\/strong>\u00a0Special bend angles, non-standard thread lengths, and custom tail lengths for your hose construction.<\/li>\n<li><strong>Surface treatment customization.<\/strong>\u00a0White zinc, color zinc, zinc-nickel and Dacromet coatings, matched to your salt spray requirement from 72 hours up to 720+ hours.<\/li>\n<li><strong>Laser marking.<\/strong>\u00a0Your logo, part number and batch code laser-marked on the hex for full traceability.<\/li>\n<li><strong>Packaging customization.<\/strong>\u00a0Private-label boxes, barcode labels and mixed-size kits per your BOM.<\/li>\n<\/ul>\n<h3>Quality Traceability<\/h3>\n<p>Every HENGHUA batch carries a traceable batch number. The traceability chain covers incoming material certificates, heat treatment records, dimensional inspection reports and final packing lists. Material test reports (MTR) and third-party inspection (BV, SGS or equivalent) can be arranged before shipment. Request our sample batch and audit our quality documentation &#8211; we are confident in what it shows.<\/p>\n<h2>Foire aux questions<\/h2>\n<h3>What is a 90 degree ORFS female O-ring seal fitting?<\/h3>\n<p>It is a one-piece elbow fitting with a UNF female thread and a flat face seat. The seat receives the O-ring tip of the mating ORFS male connector, and the compressed O-ring carries the seal. The 90 degree outlet redirects the hose at a right angle to the port axis.<\/p>\n<h3>Why choose a 90 degree elbow instead of a straight fitting?<\/h3>\n<p>A 90 degree elbow turns the hose immediately at the port, which is the standard routing at pumps, valve manifolds and cylinder heads. It removes the need for a separate adapter and keeps the hose close to the machine frame.<\/p>\n<h3>Does the female fitting include the O-ring?<\/h3>\n<p>The O-ring lives in the groove at the tip of the mating ORFS male connector (our 14211 series). The female fitting provides the flat seat. Order the male and female ends together and the connection is complete.<\/p>\n<h3>Why does ORFS leak less than JIC?<\/h3>\n<p>ORFS seals with a compressed O-ring against a flat face, which tolerates scratches and surface imperfections. JIC seals with metal-to-metal 37 degree flare contact, which can weep under high impulse pressure.<\/p>\n<h3>Which hose works with the 24291-RW fitting?<\/h3>\n<p>The 24291-RW version is designed for braided hydraulic hose such as SAE 100 R1AT, R2AT and EN 853 1SN \/ 2SN. For spiral-wound hose, use the 24292 series.<\/p>\n<h3>What is the minimum order quantity?<\/h3>\n<p>Stock sizes start from 100 pcs. Customized versions start from 500 pcs per size. OEM annual contracts can be discussed directly with our factory team.<\/p>\n<h2>Get a Quote for Your 90 Degree ORFS Female O-Ring Seal Fitting<\/h2>\n<p>Tell us your hose model, thread size, bend angle and annual volume. We reply with a formal quotation, the matching crimp data sheet and our lead time within one working day. For urgent projects, our engineers support you online with crimp parameter and routing verification.<\/p>","protected":false},"excerpt":{"rendered":"<p>Our 90 degree ORFS female O-ring seal fitting, series 24291-RW, is a one-piece crimp-on elbow that connects braided hydraulic hose to ORFS female ports at a right angle, with a flat face seat and a UNF female thread. It is built to the American ORFS (O-Ring Face Seal) system, where the compressed O-ring carries the [&hellip;]<\/p>\n","protected":false},"featured_media":3872,"comment_status":"open","ping_status":"closed","template":"","meta":{"_surecart_dashboard_logo_width":"180px","_surecart_dashboard_show_logo":true,"_surecart_dashboard_navigation_orders":true,"_surecart_dashboard_navigation_invoices":true,"_surecart_dashboard_navigation_subscriptions":true,"_surecart_dashboard_navigation_downloads":true,"_surecart_dashboard_navigation_billing":true,"_surecart_dashboard_navigation_account":true,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[834],"product_tag":[887,882,886,880,883],"class_list":{"0":"post-3871","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-one-piece-fittings","7":"product_tag-90-degree-orfs-female-o-ring-seal-fitting","8":"product_tag-o-ring-face-seal-fittings","9":"product_tag-orfs-female-elbow-fitting","10":"product_tag-orfs-hydraulic-hose-fittings","11":"product_tag-orfs-unf-thread-hose-fittings","12":"desktop-align-left","13":"tablet-align-left","14":"mobile-align-left","15":"ast-product-gallery-layout-horizontal-slider","16":"ast-product-gallery-with-no-image","17":"ast-product-tabs-layout-horizontal","19":"first","20":"instock","21":"shipping-taxable","22":"product-type-simple"},"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v24.5 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>90 Degree ORFS Female O-Ring Seal Fitting | HENGHUA<\/title>\n<meta name=\"description\" content=\"90 degree ORFS female O-ring seal fitting, SAE J1453 ORFS hose fittings with UNF thread, 9\/16 to 2 inch, -40 to +100\u00b0C. Get a quote and crimp data sheet.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.henghuahose.com\/fr\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"24291-RW 90 Degree ORFS Female O-Ring Seal Fitting\" \/>\n<meta property=\"og:description\" content=\"90 degree ORFS female O-ring seal fitting, SAE J1453 ORFS hose fittings with UNF thread, 9\/16 to 2 inch, -40 to +100\u00b0C. Get a quote and crimp data sheet.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.henghuahose.com\/fr\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/\" \/>\n<meta property=\"og:site_name\" content=\"HENGHUA\" \/>\n<meta property=\"article:modified_time\" content=\"2026-08-28T07:12:55+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/24291-RW-Fitting.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"800\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data1\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\\\/\",\"name\":\"90 Degree ORFS Female O-Ring Seal Fitting | HENGHUA\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/24291-RW-Fitting.jpg\",\"datePublished\":\"2026-08-28T07:12:53+00:00\",\"dateModified\":\"2026-08-28T07:12:55+00:00\",\"description\":\"90 degree ORFS female O-ring seal fitting, SAE J1453 ORFS hose fittings with UNF thread, 9\\\/16 to 2 inch, -40 to +100\u00b0C. Get a quote and crimp data sheet.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/24291-RW-Fitting.jpg\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/24291-RW-Fitting.jpg\",\"width\":800,\"height\":800,\"caption\":\"24291-RW Fitting\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Shop\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/shop\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"24291-RW 90 Degree ORFS Female O-Ring Seal Fitting\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"name\":\"HENGHUA\",\"description\":\"Powering Your Industry, Worldwide.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"alternateName\":\"HENGHUA Hose\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.henghuahose.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\",\"name\":\"HENGHUA\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"width\":388,\"height\":90,\"caption\":\"HENGHUA\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"90 Degree ORFS Female O-Ring Seal Fitting | HENGHUA","description":"90 degree ORFS female O-ring seal fitting, SAE J1453 ORFS hose fittings with UNF thread, 9\/16 to 2 inch, -40 to +100\u00b0C. Get a quote and crimp data sheet.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.henghuahose.com\/fr\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/","og_locale":"fr_FR","og_type":"article","og_title":"24291-RW 90 Degree ORFS Female O-Ring Seal Fitting","og_description":"90 degree ORFS female O-ring seal fitting, SAE J1453 ORFS hose fittings with UNF thread, 9\/16 to 2 inch, -40 to +100\u00b0C. Get a quote and crimp data sheet.","og_url":"https:\/\/www.henghuahose.com\/fr\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/","og_site_name":"HENGHUA","article_modified_time":"2026-08-28T07:12:55+00:00","og_image":[{"width":800,"height":800,"url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/24291-RW-Fitting.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Dur\u00e9e de lecture estim\u00e9e":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.henghuahose.com\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/","url":"https:\/\/www.henghuahose.com\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/","name":"90 Degree ORFS Female O-Ring Seal Fitting | HENGHUA","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.henghuahose.com\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/#primaryimage"},"image":{"@id":"https:\/\/www.henghuahose.com\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/24291-RW-Fitting.jpg","datePublished":"2026-08-28T07:12:53+00:00","dateModified":"2026-08-28T07:12:55+00:00","description":"90 degree ORFS female O-ring seal fitting, SAE J1453 ORFS hose fittings with UNF thread, 9\/16 to 2 inch, -40 to +100\u00b0C. Get a quote and crimp data sheet.","breadcrumb":{"@id":"https:\/\/www.henghuahose.com\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.henghuahose.com\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.henghuahose.com\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/#primaryimage","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/24291-RW-Fitting.jpg","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/24291-RW-Fitting.jpg","width":800,"height":800,"caption":"24291-RW Fitting"},{"@type":"BreadcrumbList","@id":"https:\/\/www.henghuahose.com\/product\/24291-rw-90-degree-orfs-female-o-ring-seal-fitting\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.henghuahose.com\/"},{"@type":"ListItem","position":2,"name":"Shop","item":"https:\/\/www.henghuahose.com\/shop\/"},{"@type":"ListItem","position":3,"name":"24291-RW 90 Degree ORFS Female O-Ring Seal Fitting"}]},{"@type":"WebSite","@id":"https:\/\/www.henghuahose.com\/#website","url":"https:\/\/www.henghuahose.com\/","name":"HENGHUA","description":"Au service de votre secteur d'activit\u00e9, partout dans le monde.","publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"alternateName":"HENGHUA Hose","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.henghuahose.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/www.henghuahose.com\/#organization","name":"HENGHUA","url":"https:\/\/www.henghuahose.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","width":388,"height":90,"caption":"HENGHUA"},"image":{"@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product\/3871","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/comments?post=3871"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/media\/3872"}],"wp:attachment":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/media?parent=3871"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_brand?post=3871"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_cat?post=3871"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_tag?post=3871"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}