{"id":3844,"date":"2026-08-28T05:55:23","date_gmt":"2026-08-28T05:55:23","guid":{"rendered":"https:\/\/www.henghuahose.com\/?post_type=product&#038;p=3844"},"modified":"2026-09-04T06:16:30","modified_gmt":"2026-09-04T06:16:30","slug":"20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting","status":"publish","type":"product","link":"https:\/\/www.henghuahose.com\/fr\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/","title":{"rendered":"20541-TRW 45 Degree Metric Female 24 Degree Cone O-Ring Heavy Series Fitting"},"content":{"rendered":"<p>Our 45 degree metric female 24 degree cone O-ring heavy series fitting, series 20541-TRW, is the heavy-duty (H.T.) version of our 45 degree female elbow range. It is a one-piece crimp-on elbow that connects high pressure braided hose to metric female ports at a fixed 45 degree angle, with a 24 degree cone seat and a pre-installed O-ring. The range covers M14x1.5 to M52x2 threads, dash size -04 to -24, hose bore DN6 to DN40. Every elbow is formed in one piece, without welding, and 100% dimensionally inspected before shipment.<\/p>\n<p><strong>Conformit\u00e9 et normes :<\/strong><\/p>\n<ul>\n<li>DIN 2353 heavy series (H.T.) dimensional standard<\/li>\n<li>DIN 3865 (raccord m\u00e9trique \u00e0 c\u00f4ne de 24 degr\u00e9s avec joint torique, forme A)<\/li>\n<li>ISO 8434-1 (g\u00e9om\u00e9trie du raccord \u00e0 c\u00f4ne de 24 degr\u00e9s)<\/li>\n<li>S\u00e9rie ISO 12151 (raccords de tuyaux avec connecteurs \u00e0 c\u00f4ne de 24 degr\u00e9s)<\/li>\n<li>SAE J516 (norme de r\u00e9f\u00e9rence g\u00e9n\u00e9rale relative \u00e0 la conception des raccords pour flexibles hydrauliques)<\/li>\n<\/ul>\n<p><strong>Why buyers choose this elbow:<\/strong><\/p>\n<ul>\n<li><strong>Heavy series rating.<\/strong>\u00a0The H.T. design uses larger hex and thread dimensions than the light series for the same bore, carrying higher working pressures on high pressure hose circuits.<\/li>\n<li><strong>One-piece 45 degree elbow.<\/strong>\u00a0Formed from a single forging or cold-headed blank. No weld at the bend, no weak point under impulse pressure.<\/li>\n<li><strong>Un joint torique est fourni avec chaque raccord.<\/strong>\u00a0Le joint torique s'ins\u00e8re dans le logement conique \u00e0 24 degr\u00e9s et assure l'\u00e9tanch\u00e9it\u00e9. Pas de ruban adh\u00e9sif, pas de p\u00e2te, pas d'approximations lors du montage.<\/li>\n<li><strong>Matched to 2SN and 4SP hose.<\/strong>\u00a0The heavy series profile is the standard partner for SAE 100 R2AT, EN 853 2SN and spiral-wound high pressure hose constructions.<\/li>\n<\/ul>\n<h2>45 Degree Metric Female 24 Degree Cone O-Ring Heavy Series Fitting Technical Specifications<\/h2>\n<p>The table below lists all 18 sizes of the 20541-TRW 45 degree metric female 24 degree cone O-ring heavy series fitting. Dimensions are in millimeters. Each fitting ships with the O-ring size listed, matched to the cone seat. Dim. A is the horizontal distance from the elbow axis to the hose-end shoulder, Dim. H is the height from the elbow axis to the swivel nut face, Dim. C is the cone zone length, and S2 is the wrench size across flats.<\/p>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>R\u00e9f\u00e9rence.<\/th>\n<th>Fil de discussion E<\/th>\n<th>Diam\u00e8tre int\u00e9rieur du tuyau DN (mm)<\/th>\n<th>Taille du tiret<\/th>\n<th>Diam\u00e8tre ext\u00e9rieur du tube (mm)<\/th>\n<th>Joint torique<\/th>\n<th>Dim. A (mm)<\/th>\n<th>Dim. C (mm)<\/th>\n<th>Dim. H (mm)<\/th>\n<th>Hex S2 (mm)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>20541-14-04RW<\/td>\n<td>M14x1,5<\/td>\n<td>6<\/td>\n<td>-04<\/td>\n<td>6<\/td>\n<td>O04,5 \u00d7 1,5<\/td>\n<td>50.1<\/td>\n<td>1.1<\/td>\n<td>28.0<\/td>\n<td>19<\/td>\n<\/tr>\n<tr>\n<td>20541-16-04RW<\/td>\n<td>M16x1,5<\/td>\n<td>6<\/td>\n<td>-04<\/td>\n<td>8<\/td>\n<td>O06,5 \u00d7 1,5<\/td>\n<td>50.4<\/td>\n<td>1.5<\/td>\n<td>28.3<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>20541-16-05RW<\/td>\n<td>M16x1,5<\/td>\n<td>8<\/td>\n<td>-05<\/td>\n<td>8<\/td>\n<td>O06,5 \u00d7 1,5<\/td>\n<td>52.2<\/td>\n<td>1.5<\/td>\n<td>28.9<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>20541-18-04TRW<\/td>\n<td>M18x1,5<\/td>\n<td>6<\/td>\n<td>-04<\/td>\n<td>10<\/td>\n<td>O08,0 \u00d7 1,5<\/td>\n<td>43.4<\/td>\n<td>2.0<\/td>\n<td>21.3<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>20541-18-06RW<\/td>\n<td>M18x1,5<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>10<\/td>\n<td>O08,0 \u00d7 1,5<\/td>\n<td>54.3<\/td>\n<td>2.0<\/td>\n<td>29.6<\/td>\n<td>24<\/td>\n<\/tr>\n<tr>\n<td>20541-20-06TRW<\/td>\n<td>M20x1.5<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>12<\/td>\n<td>O10,0 \u00d7 1,5<\/td>\n<td>49.7<\/td>\n<td>2.5<\/td>\n<td>25.0<\/td>\n<td>24<\/td>\n<\/tr>\n<tr>\n<td>20541-20-08RW<\/td>\n<td>M20x1.5<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>12<\/td>\n<td>O10,0 \u00d7 1,5<\/td>\n<td>67.8<\/td>\n<td>2.5<\/td>\n<td>32.8<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>20541-22-06TRW<\/td>\n<td>M22x1,5<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>14<\/td>\n<td>O11.0x2.0<\/td>\n<td>49.6<\/td>\n<td>2.5<\/td>\n<td>25.3<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>20541-22-08RW<\/td>\n<td>M22x1,5<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>14<\/td>\n<td>O11.0x2.0<\/td>\n<td>68.1<\/td>\n<td>2.5<\/td>\n<td>33.2<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>20541-24-08RW<\/td>\n<td>M24x1.5<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>16<\/td>\n<td>O13.0x2.0<\/td>\n<td>62.5<\/td>\n<td>3.0<\/td>\n<td>27.5<\/td>\n<td>30<\/td>\n<\/tr>\n<tr>\n<td>20541-24-10RW<\/td>\n<td>M24x1.5<\/td>\n<td>16<\/td>\n<td>-10<\/td>\n<td>16<\/td>\n<td>O13.0x2.0<\/td>\n<td>80.7<\/td>\n<td>2.5<\/td>\n<td>35.9<\/td>\n<td>30<\/td>\n<\/tr>\n<tr>\n<td>20541-30-10TRW<\/td>\n<td>M30x2<\/td>\n<td>16<\/td>\n<td>-10<\/td>\n<td>20<\/td>\n<td>O16.3&#215;2.4<\/td>\n<td>75.8<\/td>\n<td>3.0<\/td>\n<td>31.0<\/td>\n<td>36<\/td>\n<\/tr>\n<tr>\n<td>20541-30-12RW<\/td>\n<td>M30x2<\/td>\n<td>20<\/td>\n<td>-12<\/td>\n<td>20<\/td>\n<td>O16.3&#215;2.4<\/td>\n<td>90.5<\/td>\n<td>3.0<\/td>\n<td>42.4<\/td>\n<td>36<\/td>\n<\/tr>\n<tr>\n<td>20541-36-12TRW<\/td>\n<td>M36x2<\/td>\n<td>20<\/td>\n<td>-12<\/td>\n<td>25<\/td>\n<td>O20.3&#215;2.4<\/td>\n<td>82.7<\/td>\n<td>3.0<\/td>\n<td>34.6<\/td>\n<td>41<\/td>\n<\/tr>\n<tr>\n<td>20541-36-14TRW<\/td>\n<td>M36x2<\/td>\n<td>22<\/td>\n<td>-14<\/td>\n<td>25<\/td>\n<td>O20.3&#215;2.4<\/td>\n<td>84.4<\/td>\n<td>3.0<\/td>\n<td>34.0<\/td>\n<td>41<\/td>\n<\/tr>\n<tr>\n<td>20541-42-16TRW<\/td>\n<td>M42x2<\/td>\n<td>25<\/td>\n<td>-16<\/td>\n<td>30<\/td>\n<td>O25.3&#215;2.4<\/td>\n<td>92.3<\/td>\n<td>5.0<\/td>\n<td>36.8<\/td>\n<td>50<\/td>\n<\/tr>\n<tr>\n<td>20541-52-20RW<\/td>\n<td>M52x2<\/td>\n<td>32<\/td>\n<td>-20<\/td>\n<td>38<\/td>\n<td>O33.3&#215;2.4<\/td>\n<td>103.4<\/td>\n<td>6.5<\/td>\n<td>41.2<\/td>\n<td>60<\/td>\n<\/tr>\n<tr>\n<td>20541-52-24TRW<\/td>\n<td>M52x2<\/td>\n<td>40<\/td>\n<td>-24<\/td>\n<td>38<\/td>\n<td>O33.3&#215;2.4<\/td>\n<td>115.9<\/td>\n<td>6.5<\/td>\n<td>45.1<\/td>\n<td>60<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<p>Notes: The -RW suffix denotes the braided-hose version; for spiral-wound hose, use series 20542-XX-XXTRW. The swivel nut is free to rotate for easy alignment before final tightening. The 20541 series is the heavy series (H.T.) counterpart of the 20441 light series 45 degree elbow.<\/p>\n<h3>Why a One-Piece 45 Degree Elbow<\/h3>\n<p>A 45 degree outlet is the preferred routing angle where a hose must change direction without a sharp 90 degree turn. This 45 degree metric female 24 degree cone O-ring heavy series fitting replaces a straight fitting plus a separate elbow adapter, removing two potential leak points and extra length.<\/p>\n<p>The elbow body is formed in one piece by hot forging or cold heading, then machined to tolerance. There is no welded seam at the bend. Our impulse testing found that a one-piece elbow survives pressure cycling significantly longer than a welded two-piece elbow of the same size. The 45 degree outlet also keeps the hose away from sharp edges on the machine frame, which reduces cover wear and extends hose life.<\/p>\n<h3>Heavy Series vs Light Series &#8211; What Is the Difference<\/h3>\n<p>The DIN 2353 standard defines two dimensional series for the same 24 degree cone connection: light (L.T.) and heavy (S.T., also written H.T.). For the same hose bore, the heavy series uses a larger thread, a larger hex and a larger cone seat than the light series.<\/p>\n<p>The heavy series carries higher connection pressure ratings, which is why it is the standard choice for high pressure braided hose (SAE 100 R2AT, EN 853 2SN) and for spiral-wound hose assemblies. If your circuit runs above the light series rating, this heavy series elbow is the correct choice.<\/p>\n<h3>Fonctionnement du joint torique<\/h3>\n<p>The O-ring sits in a groove inside the 24 degree cone seat of the swivel nut. When the mating male 24 degree cone stud is tightened, it compresses the O-ring against the cone wall. The O-ring, not the metal cone, carries the seal.<\/p>\n<p>This gives three practical advantages for maintenance teams. First, the seal is forgiving of minor surface scratches on the mating cone. Second, the swivel nut can be re-tightened several times without seal degradation. Third, there is no need for thread sealant, tape or paste.<\/p>\n<h3>Profondeur d'insertion et diam\u00e8tre ext\u00e9rieur du sertissage : les deux chiffres demand\u00e9s par les ing\u00e9nieurs<\/h3>\n<p>La profondeur d'insertion correspond \u00e0 la longueur de la partie cannel\u00e9e qui p\u00e9n\u00e8tre dans l'al\u00e9sage du tuyau. Le diam\u00e8tre ext\u00e9rieur apr\u00e8s sertissage correspond au diam\u00e8tre ext\u00e9rieur de la virole apr\u00e8s sertissage. Ces deux param\u00e8tres d\u00e9terminent ensemble si l'ensemble r\u00e9siste \u00e0 la pression ou pr\u00e9sente des fuites au niveau de la zone de sertissage.<\/p>\n<p>HENGHUA publishes the matched insert depth and crimp O.D. for every hose construction we supply, including SAE 100 R1AT, R2AT, EN 853 1SN, 2SN and spiral constructions. Request our crimp data sheet with your hose model and we will return the exact crimp O.D. and die selection within one working day. Our production testing found that a verified crimp O.D. within the published tolerance (typically +\/- 0.2 mm) gives a burst safety margin of 4:1 or higher on the complete assembly.<\/p>\n<h3>Mat\u00e9riaux et traitements thermiques<\/h3>\n<ul>\n<li><strong>Acier au carbone (standard) :<\/strong>\u00a0acier au carbone \u00e0 haute r\u00e9sistance, form\u00e9 \u00e0 froid ou forg\u00e9 \u00e0 chaud (nuances 20# \/ 35# \/ 45#). La queue et le si\u00e8ge conique sont c\u00e9ment\u00e9s selon un proc\u00e9d\u00e9 de c\u00e9mentation et de trempe afin d'assurer une r\u00e9sistance \u00e0 la fatigue. La plage de duret\u00e9 de r\u00e9f\u00e9rence est comprise entre HRC 20 et 28 au c\u0153ur, avec une couche superficielle c\u00e9ment\u00e9e.<\/li>\n<li><strong>Finition de surface :<\/strong>\u00a0Zingage blanc ou de couleur (jaune) avec passivation. Des rev\u00eatements en zinc-nickel et Dacromet sont disponibles en option pour r\u00e9pondre \u00e0 des exigences plus strictes en mati\u00e8re de test au brouillard salin.<\/li>\n<li><strong>Acier inoxydable (en option) :<\/strong>\u00a0304, 316 or 316L stainless steel for corrosive media and washdown environments.<\/li>\n<li><strong>\u00c9lastom\u00e8re des joints toriques :<\/strong>\u00a0NBR (nitrile) standard. Le FKM, l'EPDM et d'autres \u00e9lastom\u00e8res sont disponibles sur demande pour des fluides et des temp\u00e9ratures sp\u00e9cifiques.<\/li>\n<\/ul>\n<h3>Valeurs nominales de pression et de temp\u00e9rature<\/h3>\n<p>The connection rating follows the DIN 2353 heavy series reference table below. These are reference values (\u00a7) for the fitting connection itself. The final working pressure of a hose assembly is set by the hose construction and the approved crimping specification.<\/p>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>Taille du tiret<\/th>\n<th>Diam\u00e8tre int\u00e9rieur du tuyau DN (mm)<\/th>\n<th>Reference Connection Pressure (bar)\u00a7<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>-04 to -06<\/td>\n<td>6 to 10<\/td>\n<td>400<\/td>\n<\/tr>\n<tr>\n<td>-08<\/td>\n<td>12<\/td>\n<td>400<\/td>\n<\/tr>\n<tr>\n<td>-10<\/td>\n<td>16<\/td>\n<td>315<\/td>\n<\/tr>\n<tr>\n<td>-12<\/td>\n<td>20<\/td>\n<td>315<\/td>\n<\/tr>\n<tr>\n<td>-14 to -16<\/td>\n<td>22 to 25<\/td>\n<td>250<\/td>\n<\/tr>\n<tr>\n<td>-20 to -24<\/td>\n<td>32 to 40<\/td>\n<td>250<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<p>\u00a7Reference values per DIN 2353 heavy series (H.T.), higher than the light series ratings for the same bore. Confirm the assembly rating with the HENGHUA crimp data sheet matched to your hose.<\/p>\n<p><strong>Plage de temp\u00e9ratures :<\/strong>\u00a0De -40 \u00b0C \u00e0 +100 \u00b0C avec le joint torique NBR standard. \u00c0 des temp\u00e9ratures \u00e9lev\u00e9es, appliquer la r\u00e9duction de capacit\u00e9 pr\u00e9vue par la norme SAE J517 \u00e0 la pression de service de l'ensemble. La plage de fonctionnement du joint torique peut \u00eatre \u00e9tendue gr\u00e2ce \u00e0 l'utilisation d'un mat\u00e9riau FKM pour les circuits \u00e0 haute temp\u00e9rature.<\/p>\n<p><strong>Essais de pression :<\/strong>\u00a0HENGHUA est en mesure de fournir des ensembles ayant subi des essais de r\u00e9sistance jusqu'\u00e0 100% de la pression de service nominale, avec des certificats d'essai sur demande.<\/p>\n<h2>How to Select the Right 45 Degree Metric Female 24 Degree Cone O-Ring Heavy Series Fitting<\/h2>\n<p>Selection is a four-step process. First, confirm your circuit pressure exceeds the light series rating. Second, decide whether the port truly needs a 45 degree outlet. Third, match the hose bore to the dash size. Fourth, match the thread to your port.<\/p>\n<h3>Structure des r\u00e9f\u00e9rences<\/h3>\n<p>Lisez toute r\u00e9f\u00e9rence HENGHUA en trois segments. Exemple :\u00a0<strong>20541-22-08RW<\/strong>.<\/p>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>Segment<\/th>\n<th>Valeur<\/th>\n<th>Signification<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>S\u00e9rie<\/td>\n<td>20541<\/td>\n<td>45 degree metric female 24 degree cone O-ring, heavy series (H.T.)<\/td>\n<\/tr>\n<tr>\n<td>Code du fil de discussion<\/td>\n<td>22<\/td>\n<td>M22x1,5 (ce chiffre correspond au diam\u00e8tre nominal du filetage)<\/td>\n<\/tr>\n<tr>\n<td>Taille des tirets<\/td>\n<td>08<\/td>\n<td>Diam\u00e8tre int\u00e9rieur du tuyau DN12, tiret -08<\/td>\n<\/tr>\n<tr>\n<td>Suffixe<\/td>\n<td>RW<\/td>\n<td>Braided hose version (spiral hose uses 20542 series)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<h3>S\u00e9lectionner par s\u00e9rie de tuyaux<\/h3>\n<p>The 20541-TRW elbow is designed for high pressure braided hydraulic hose. Recommended matching constructions:<\/p>\n<ul>\n<li>SAE 100 R2AT (tresse \u00e0 deux fils) \u2013 pour les tailles allant de -04 \u00e0 -24<\/li>\n<li>EN 853 2SN (equivalent European construction)<\/li>\n<li>SAE 100 R1AT and EN 853 1SN (one wire braid) &#8211; where the circuit permits<\/li>\n<li>Spiral constructions (EN 856 4SP \/ 4SH) &#8211; use the 20542 series version<\/li>\n<\/ul>\n<h3>S\u00e9lectionner par calibre de filetage<\/h3>\n<p>The swivel nut carries a metric female thread that accepts a male 24 degree cone stud. The O-ring in the cone seat does the sealing, so the mating stud needs no additional sealing element:<\/p>\n<ul>\n<li><strong>Petites tailles :<\/strong>\u00a0M14x1.5, M16x1.5, M18x1.5, M20x1.5 (dash -04 to -06)<\/li>\n<li><strong>Tailles moyennes :<\/strong>\u00a0M22x1.5, M24x1.5, M30x2 (dash -06 to -12)<\/li>\n<li><strong>Grandes tailles :<\/strong>\u00a0M36x2, M42x2, M52x2 (dash -12 to -24)<\/li>\n<\/ul>\n<p>The swivel nut rotates freely before tightening, which lets you align the 45 degree outlet in any direction around the port axis.<\/p>\n<h3>45 Degree vs Straight vs 90 Degree &#8211; Which One Do You Need<\/h3>\n<p>Use a straight fitting when the hose leaves the port in line with the port axis. Use a 45 degree elbow when the hose must change direction but a 90 degree elbow would create too sharp a bend. Use a 90 degree elbow when the hose must turn immediately. When in doubt, send us a sketch of your routing and our engineers will confirm the correct angle and size within one working day.<\/p>\n<h3>R\u00e9f\u00e9rences crois\u00e9es<\/h3>\n<p>This series replaces equivalent DIN 3865 \/ DIN 2353 heavy series 45 degree metric female fittings with O-ring available in the market. If you hold an OEM part number or a competitor catalog number, send it to our sales team. We confirm the direct replacement within 24 hours, including thread, dash size, hex, insert depth and O-ring size checks.<\/p>\n<h3>Emballage et logistique<\/h3>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>Article<\/th>\n<th>Emballage standard pour l'exportation<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Unit\u00e9 d'emballage<\/td>\n<td>10 pi\u00e8ces par bo\u00eete int\u00e9rieure (petites tailles), 5 pi\u00e8ces par bo\u00eete (grandes tailles)<\/td>\n<\/tr>\n<tr>\n<td>Carton d'emballage ext\u00e9rieur<\/td>\n<td>Carton ondul\u00e9 \u00e0 5 couches de qualit\u00e9 export, 10 bo\u00eetes par carton<\/td>\n<\/tr>\n<tr>\n<td>Poids<\/td>\n<td>Poids net et brut par taille, tels qu'indiqu\u00e9s dans notre devis<\/td>\n<\/tr>\n<tr>\n<td>Origine<\/td>\n<td>Chine (usine de HENGHUA)<\/td>\n<\/tr>\n<tr>\n<td>D\u00e9lai de livraison<\/td>\n<td>Les articles en stock sont exp\u00e9di\u00e9s sous 7 jours ; les articles fabriqu\u00e9s sur commande, sous 15 \u00e0 25 jours.<\/td>\n<\/tr>\n<tr>\n<td>Paiement<\/td>\n<td>Paiement par virement bancaire (T\/T), lettre de cr\u00e9dit (L\/C) et assurance commerciale accept\u00e9s<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<h2>Guide de montage : quatre \u00e9tapes pour un montage s\u00fbr du tuyau<\/h2>\n<p>Follow this process for every crimped assembly. It applies to every 45 degree metric female 24 degree cone O-ring heavy series fitting size from dash -04 to -24. Skipping one step is the most common cause of early fitting failure.<\/p>\n<p><strong>\u00c9tape 1 \u2013 Coupez le tuyau \u00e0 angle droit.<\/strong>\u00a0Utilisez un coupe-tuyau bien aff\u00fbt\u00e9. Une coupe \u00e0 bords droits permet au raccord de s'embo\u00eeter uniform\u00e9ment dans le tuyau. Une coupe biseaut\u00e9e ou irr\u00e9guli\u00e8re laisse des espaces vides qui peuvent devenir des points de fuite.<\/p>\n<p><strong>\u00c9tape 2 \u2013 Marquez la profondeur d'insertion.<\/strong>\u00a0Mesurez la profondeur d'insertion indiqu\u00e9e dans la fiche technique de sertissage HENGHUA. Tracez une ligne sur la gaine du tuyau \u00e0 cette distance. Le rep\u00e8re doit rester visible apr\u00e8s l'insertion.<\/p>\n<p><strong>\u00c9tape 3 \u2013 Lubrifiez et ins\u00e9rez.<\/strong>\u00a0Appliquez une fine couche de lubrifiant de montage compatible \u00e0 l'int\u00e9rieur du tuyau et sur l'extr\u00e9mit\u00e9 cannel\u00e9e du raccord. Enfoncez le raccord en effectuant un mouvement de rotation jusqu'\u00e0 ce que le rep\u00e8re de profondeur s'aligne avec l'extr\u00e9mit\u00e9 du raccord. Arr\u00eatez-vous au niveau du rep\u00e8re. Ne forcez pas au-del\u00e0.<\/p>\n<p><strong>\u00c9tape 4 \u2013 Sertir et v\u00e9rifier.<\/strong>\u00a0Select the correct die set for your hose and fitting size. Crimp in one continuous stroke. After crimping, measure the crimp O.D. with a digital caliper and compare it with the tolerance on the crimp data sheet. Record the value on your quality log. Then align the swivel nut and tighten it to the torque value on the data sheet.<\/p>\n<h3>Consignes de s\u00e9curit\u00e9 \u2013 \u00c0 lire avant de proc\u00e9der au sertissage<\/h3>\n<ul>\n<li><strong>Ne m\u00e9langez jamais les marques.<\/strong>\u00a0Les flexibles et les raccords de diff\u00e9rents fabricants peuvent pr\u00e9senter les m\u00eames dimensions, mais utiliser des param\u00e8tres de sertissage diff\u00e9rents. Veillez \u00e0 toujours utiliser un ensemble flexible, raccord et fiche technique de sertissage compatibles.<\/li>\n<li><strong>Ne scellez jamais le c\u00f4ne \u00e0 24 degr\u00e9s avec du ruban adh\u00e9sif.<\/strong>\u00a0C'est le joint torique situ\u00e9 dans le si\u00e8ge conique qui assure l'\u00e9tanch\u00e9it\u00e9. L'application de ruban ou de p\u00e2te d'\u00e9tanch\u00e9it\u00e9 sur la face du c\u00f4ne endommage le joint torique et compromet l'\u00e9tanch\u00e9it\u00e9.<\/li>\n<li><strong>V\u00e9rifiez le joint torique avant le montage.<\/strong>\u00a0Un joint torique coup\u00e9, pinc\u00e9 ou durci doit \u00eatre remplac\u00e9. Le joint torique est l'\u00e9l\u00e9ment d'\u00e9tanch\u00e9it\u00e9 ; ne proc\u00e9dez jamais au montage sans lui.<\/li>\n<li><strong>Do not substitute light series parts.<\/strong>\u00a0A light series fitting on a heavy series circuit is an overpressure hazard. Check the series code on the part before assembly.<\/li>\n<li><strong>Align the swivel nut before final tightening.<\/strong>\u00a0Rotate the 45 degree outlet to its final direction, then tighten. Do not use the hose to twist the nut into position after tightening.<\/li>\n<li><strong>Never reuse a crimped fitting.<\/strong>\u00a0Once crimped, the ferrule zone is work-hardened. A re-crimp cannot restore the original grip.<\/li>\n<\/ul>\n<h2>OEM Customization and Quality Traceability<\/h2>\n<p>HENGHUA supplies not only standard sizes but also fully customized 45 degree metric female 24 degree cone O-ring heavy series fitting solutions for OEM programs.<\/p>\n<h3>Customization Services<\/h3>\n<ul>\n<li><strong>Angle and thread customization.<\/strong>\u00a0Special bend angles, non-standard thread lengths, and custom tail lengths for your hose construction.<\/li>\n<li><strong>O-ring elastomer selection.<\/strong>\u00a0NBR, FKM, EPDM and other elastomers matched to your fluid and temperature range.<\/li>\n<li><strong>Surface treatment customization.<\/strong>\u00a0White zinc, color zinc, zinc-nickel and Dacromet coatings, matched to your salt spray requirement from 72 hours up to 720+ hours.<\/li>\n<li><strong>Laser marking.<\/strong>\u00a0Your logo, part number and batch code laser-marked on the hex for full traceability.<\/li>\n<li><strong>Packaging customization.<\/strong>\u00a0Private-label boxes, barcode labels and mixed-size kits per your BOM.<\/li>\n<\/ul>\n<h3>Quality Traceability<\/h3>\n<p>Every HENGHUA batch carries a traceable batch number. The traceability chain covers incoming material certificates, heat treatment records, dimensional inspection reports, O-ring material certificates and final packing lists. Material test reports (MTR) and third-party inspection (BV, SGS or equivalent) can be arranged before shipment. Request our sample batch and audit our quality documentation &#8211; we are confident in what it shows.<\/p>\n<h2>Foire aux questions<\/h2>\n<h3>What is a 45 degree metric female 24 degree cone O-ring heavy series fitting?<\/h3>\n<p>It is a one-piece elbow fitting whose swivel nut carries a metric female thread with a 24 degree cone seat and a pre-installed O-ring, built to the DIN 2353 heavy series dimensional standard. The 45 degree outlet redirects the hose at a shallow angle to the port axis.<\/p>\n<h3>What is the difference between heavy series and light series?<\/h3>\n<p>For the same hose bore, the heavy series uses larger thread, hex and cone seat dimensions, which carry higher connection pressure ratings. The light series is more compact and lower cost. This page covers the heavy series (H.T.).<\/p>\n<h3>Why choose a 45 degree elbow instead of a straight fitting?<\/h3>\n<p>A 45 degree elbow removes the need for a separate elbow adapter, saves routing space, and keeps the hose bend radius within safe limits. It is the best choice when the hose must leave the port at a shallow angle.<\/p>\n<h3>Is the O-ring included?<\/h3>\n<p>Yes. Every 20541-TRW fitting ships with the matching O-ring pre-installed in the cone seat. Spare O-rings can be ordered by the size code listed in the specification table.<\/p>\n<h3>Which hose works with the 20541-TRW fitting?<\/h3>\n<p>The 20541-TRW version is designed for high pressure braided hydraulic hose such as SAE 100 R2AT and EN 853 2SN. For spiral-wound hose, use the 20542 series.<\/p>\n<h3>What is the minimum order quantity?<\/h3>\n<p>Stock sizes start from 100 pcs. Customized versions start from 500 pcs per size. OEM annual contracts can be discussed directly with our factory team.<\/p>\n<h2>Get a Quote for Your 45 Degree Metric Female 24 Degree Cone O-Ring Heavy Series Fitting<\/h2>\n<p>Tell us your hose model, thread size, bend angle and annual volume. We reply with a formal quotation, the matching crimp data sheet and our lead time within one working day. For urgent projects, our engineers support you online with crimp parameter and routing verification.<\/p>","protected":false},"excerpt":{"rendered":"<p>Our 45 degree metric female 24 degree cone O-ring heavy series fitting, series 20541-TRW, is the heavy-duty (H.T.) version of our 45 degree female elbow range. It is a one-piece crimp-on elbow that connects high pressure braided hose to metric female ports at a fixed 45 degree angle, with a 24 degree cone seat and [&hellip;]<\/p>\n","protected":false},"featured_media":3845,"comment_status":"open","ping_status":"closed","template":"","meta":{"_surecart_dashboard_logo_width":"180px","_surecart_dashboard_show_logo":true,"_surecart_dashboard_navigation_orders":true,"_surecart_dashboard_navigation_invoices":true,"_surecart_dashboard_navigation_subscriptions":true,"_surecart_dashboard_navigation_downloads":true,"_surecart_dashboard_navigation_billing":true,"_surecart_dashboard_navigation_account":true,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[1053,834],"product_tag":[854,848,855,853,845],"class_list":{"0":"post-3844","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-metric-hydraulic-fittings","7":"product_cat-one-piece-fittings","8":"product_tag-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting","9":"product_tag-din-2353-heavy-series-fittings","10":"product_tag-heavy-duty-hydraulic-hose-elbow-fittings","11":"product_tag-high-pressure-o-ring-hose-fittings","12":"product_tag-metric-female-24-degree-cone-o-ring-elbow-fitting","13":"desktop-align-left","14":"tablet-align-left","15":"mobile-align-left","16":"ast-product-gallery-layout-horizontal-slider","17":"ast-product-gallery-with-no-image","18":"ast-product-tabs-layout-horizontal","20":"first","21":"instock","22":"shipping-taxable","23":"product-type-simple"},"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v24.5 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>45 Degree Metric Female 24 Cone O-Ring Heavy Series Fitting<\/title>\n<meta name=\"description\" content=\"45 degree metric female 24 degree cone O-ring heavy series fitting, DIN 2353 H.T. elbow crimp hose fittings, M14x1.5-M52x2. Get a quote and crimp data sheet.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.henghuahose.com\/fr\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"20541-TRW 45 Degree Metric Female 24 Degree Cone O-Ring Heavy Series Fitting\" \/>\n<meta property=\"og:description\" content=\"45 degree metric female 24 degree cone O-ring heavy series fitting, DIN 2353 H.T. elbow crimp hose fittings, M14x1.5-M52x2. Get a quote and crimp data sheet.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.henghuahose.com\/fr\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/\" \/>\n<meta property=\"og:site_name\" content=\"HENGHUA\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-04T06:16:30+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/20541-TRW-Fitting.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"800\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"12 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\\\/\",\"name\":\"45 Degree Metric Female 24 Cone O-Ring Heavy Series Fitting\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/20541-TRW-Fitting.jpg\",\"datePublished\":\"2026-08-28T05:55:23+00:00\",\"dateModified\":\"2026-09-04T06:16:30+00:00\",\"description\":\"45 degree metric female 24 degree cone O-ring heavy series fitting, DIN 2353 H.T. elbow crimp hose fittings, M14x1.5-M52x2. Get a quote and crimp data sheet.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/20541-TRW-Fitting.jpg\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/20541-TRW-Fitting.jpg\",\"width\":800,\"height\":800,\"caption\":\"20541-TRW Fitting\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Shop\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/shop\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"20541-TRW 45 Degree Metric Female 24 Degree Cone O-Ring Heavy Series Fitting\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"name\":\"HENGHUA\",\"description\":\"Powering Your Industry, Worldwide.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"alternateName\":\"HENGHUA Hose\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.henghuahose.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\",\"name\":\"HENGHUA\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"width\":388,\"height\":90,\"caption\":\"HENGHUA\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"45 Degree Metric Female 24 Cone O-Ring Heavy Series Fitting","description":"45 degree metric female 24 degree cone O-ring heavy series fitting, DIN 2353 H.T. elbow crimp hose fittings, M14x1.5-M52x2. Get a quote and crimp data sheet.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.henghuahose.com\/fr\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/","og_locale":"fr_FR","og_type":"article","og_title":"20541-TRW 45 Degree Metric Female 24 Degree Cone O-Ring Heavy Series Fitting","og_description":"45 degree metric female 24 degree cone O-ring heavy series fitting, DIN 2353 H.T. elbow crimp hose fittings, M14x1.5-M52x2. Get a quote and crimp data sheet.","og_url":"https:\/\/www.henghuahose.com\/fr\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/","og_site_name":"HENGHUA","article_modified_time":"2026-09-04T06:16:30+00:00","og_image":[{"width":800,"height":800,"url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/20541-TRW-Fitting.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"12 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.henghuahose.com\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/","url":"https:\/\/www.henghuahose.com\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/","name":"45 Degree Metric Female 24 Cone O-Ring Heavy Series Fitting","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.henghuahose.com\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/#primaryimage"},"image":{"@id":"https:\/\/www.henghuahose.com\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/20541-TRW-Fitting.jpg","datePublished":"2026-08-28T05:55:23+00:00","dateModified":"2026-09-04T06:16:30+00:00","description":"45 degree metric female 24 degree cone O-ring heavy series fitting, DIN 2353 H.T. elbow crimp hose fittings, M14x1.5-M52x2. Get a quote and crimp data sheet.","breadcrumb":{"@id":"https:\/\/www.henghuahose.com\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.henghuahose.com\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.henghuahose.com\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/#primaryimage","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/20541-TRW-Fitting.jpg","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/08\/20541-TRW-Fitting.jpg","width":800,"height":800,"caption":"20541-TRW Fitting"},{"@type":"BreadcrumbList","@id":"https:\/\/www.henghuahose.com\/product\/20541-trw-45-degree-metric-female-24-degree-cone-o-ring-heavy-series-fitting\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.henghuahose.com\/"},{"@type":"ListItem","position":2,"name":"Shop","item":"https:\/\/www.henghuahose.com\/shop\/"},{"@type":"ListItem","position":3,"name":"20541-TRW 45 Degree Metric Female 24 Degree Cone O-Ring Heavy Series Fitting"}]},{"@type":"WebSite","@id":"https:\/\/www.henghuahose.com\/#website","url":"https:\/\/www.henghuahose.com\/","name":"HENGHUA","description":"Au service de votre secteur d'activit\u00e9, partout dans le monde.","publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"alternateName":"HENGHUA Hose","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.henghuahose.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/www.henghuahose.com\/#organization","name":"HENGHUA","url":"https:\/\/www.henghuahose.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","width":388,"height":90,"caption":"HENGHUA"},"image":{"@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product\/3844","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/comments?post=3844"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/media\/3845"}],"wp:attachment":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/media?parent=3844"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_brand?post=3844"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_cat?post=3844"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/product_tag?post=3844"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}