{"id":6042,"date":"2026-10-08T05:10:25","date_gmt":"2026-10-08T05:10:25","guid":{"rendered":"https:\/\/www.henghuahose.com\/?p=6042"},"modified":"2026-10-08T05:10:27","modified_gmt":"2026-10-08T05:10:27","slug":"complete-guide-to-air-hoses","status":"publish","type":"post","link":"https:\/\/www.henghuahose.com\/fr\/complete-guide-to-air-hoses\/","title":{"rendered":"A Complete Guide to Air Hoses"},"content":{"rendered":"<p>An air hose is a flexible reinforced line that carries compressed air from a compressor or an air-line outlet to a tool, a machine, or an air motor. Choosing one comes down to nine decisions \u2014 material, bore size, pressure rating, fittings, construction and handling, temperature, application, maintenance, and sourcing \u2014 and this page works through them in the order they are actually made.<\/p>\n\n\n\n<p>This article is the complete guide to air hoses: the entry point to the whole subject, covering compressed-air hose only; water hose, garden hose and hydraulic hose have their own pages, starting with hydraulic hose vs air hose. Each decision gets a short answer here and a link to its full guide. The six-question decision tree at the end condenses all nine into one specified hose.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"what-is-an-air-hose\">What Is an Air Hose?<\/h2>\n\n\n\n<p>An air hose has three layers: an inner tube that contains the air, a reinforcement layer \u2014 textile braid, textile spiral, or wire \u2014 that carries the pressure load, and an outer cover that protects against abrasion, weather, and chemicals. The tube sets chemical and temperature compatibility; the reinforcement sets the pressure rating; the cover sets how long the hose survives its environment.<\/p>\n\n\n\n<p>Everything else in this guide refines those three air hose layers. If you want the definitional answer first, start with our <a href=\"https:\/\/www.henghuahose.com\/fr\/what-is-an-air-hose\/\" target=\"_blank\" rel=\"noopener\">what is an air hose guide<\/a>.<\/p>\n\n\n\n<p>This complete guide to air hoses is organised as nine decisions, following the sequence in which they are made.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"how-to-use-this-guide\">How to Use This Guide<\/h2>\n\n\n\n<p>Start with the decision in front of you. Each section opens with the short answer and links to the full method: material, bore, pressure, fittings, construction, temperature, application, maintenance and sourcing.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"1-air-hose-materials\">1. Air Hose Materials<\/h2>\n\n\n\n<p>Which air hose material suits a home garage, a cold-climate service van or a food packing line? The answer changes with temperature and with where the hose is used \u2014 the short version:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>PVC<\/strong> \u2014 cheapest and lightest; stiffens below about 25\u00b0F and ages fastest.<\/li>\n\n\n\n<li><strong>Hybrid<\/strong> (PVC blended with rubber or PU) \u2014 general-purpose choice; flexible to about -20\u00b0F at 20\u201330% less weight than rubber.<\/li>\n\n\n\n<li><strong>Polyurethane (PU)<\/strong> \u2014 the lightest and most abrasion-resistant of the common materials; preferred for coils, cold stores, and food areas.<\/li>\n\n\n\n<li><strong>Rubber<\/strong> \u2014 toughest and coldest-capable (EPDM to about -40\u00b0F); heaviest and most expensive.<\/li>\n<\/ul>\n\n\n\n<p>Table 1. Air hose materials at a glance. Ranges are typical for textile-reinforced 3\/8-inch hose; always read the printed rating on the product.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th scope=\"col\">Mat\u00e9riau<\/th><th scope=\"col\">Plage de temp\u00e9ratures<\/th><th scope=\"col\">Weight, 50 feet at 3\/8 in<\/th><th scope=\"col\">Pression de service<\/th><th scope=\"col\">Best at<\/th><\/tr><\/thead><tbody><tr><td>PVC<\/td><td>25\u00b0F to 140\u00b0F<\/td><td>4\u20135 lb<\/td><td>200\u2013300 PSI<\/td><td>Light indoor use, lowest cost<\/td><\/tr><tr><td>Hybrid<\/td><td>-20\u00b0F to 150\u00b0F<\/td><td>5.5\u20136.5 lb<\/td><td>200\u2013300 PSI<\/td><td>General workshop use, cold garages<\/td><\/tr><tr><td>Polyurethane<\/td><td>-40\u00b0F to 140\u00b0F<\/td><td>3\u20134 lb<\/td><td>250\u2013400 PSI<\/td><td>Coils, abrasion, low weight<\/td><\/tr><tr><td>Rubber (EPDM)<\/td><td>-40\u00b0F to 200\u00b0F<\/td><td>7\u20139 lb<\/td><td>300\u2013500 PSI<\/td><td>Abrasion, oil, deep cold, long life<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Full comparisons: PVC vs rubber air hose differences, PVC vs rubber vs hybrid air hose, hybrid vs rubber, and what is a hybrid air hose. See <a href=\"https:\/\/www.henghuahose.com\/fr\/how-to-choose-an-air-hose\/\" target=\"_blank\" rel=\"noopener\">how to choose an air hose<\/a> for the decision itself.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"2-air-hose-sizes-bore\">2. Air Hose Sizes (Bore)<\/h2>\n\n\n\n<p>Air hose sizes are stated as <strong>inside diameter<\/strong>: 1\/4, 3\/8 and 1\/2 inch, or the nominal metric sizes 6, 10 and 13 mm. Outside diameter is not the size you need.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>1\/4 inch (6 mm)<\/strong> \u2014 blow guns, small nailers, short runs.<\/li>\n\n\n\n<li><strong>3\/8 inch (10 mm)<\/strong> \u2014 the workshop all-rounder; impact wrenches and spray guns at moderate distance.<\/li>\n\n\n\n<li><strong>1\/2 inch (13 mm)<\/strong> \u2014 high-flow tools, sandblasters, long runs.<\/li>\n<\/ul>\n\n\n\n<p>Two rules decide the answer in practice: never use a 1\/4-inch hose beyond about 25 feet, and increase bore rather than accepting pressure loss over a long run. Details in our <a href=\"https:\/\/www.henghuahose.com\/fr\/air-hose-size-chart-guide\/\" target=\"_blank\" rel=\"noopener\">air hose size chart<\/a>, what size air hose do I need, and how to measure an air hose.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"3-pressure-ratings\">3. Pressure Ratings<\/h2>\n\n\n\n<p>Every air hose carries two pressure numbers: working pressure and burst pressure. <strong>Pression de service<\/strong> is the limit you may operate at. <strong>Burst pressure<\/strong> is the pressure at which it fails, typically three to four times the working rating. Compressed air stores energy, so that margin is a safety feature, not a marketing figure.<\/p>\n\n\n\n<p>Never operate above the working pressure, and never treat the burst figure as an operating target. The safety arithmetic is set out in our working pressure vs burst pressure guide.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"4-fittings-and-couplers\">4. Fittings and Couplers<\/h2>\n\n\n\n<p>Three families of air hose fittings cover nearly every connection:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Barb and ferrule<\/strong> \u2014 for low-pressure hose, repairable in the field.<\/li>\n\n\n\n<li><strong>Threaded<\/strong> \u2014 NPT, BSP, or JIC ends into a port. Thread standards are not interchangeable.<\/li>\n\n\n\n<li><strong>Quick connect<\/strong> \u2014 for tools you swap. Coupler styles A, M, E, and T do not interchange.<\/li>\n<\/ol>\n\n\n\n<p>The most common cause of a &#8220;weak tool&#8221; is not the hose at all \u2014 it is a reduced-bore coupler or a mismatched thread throttling the line. See our <a href=\"https:\/\/www.henghuahose.com\/fr\/air-hose-fittings-guide\/\" target=\"_blank\" rel=\"noopener\">air hose fittings and couplers guide<\/a> and the hose coupling selection guide.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img fetchpriority=\"high\" decoding=\"async\" width=\"800\" height=\"600\" src=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg\" alt=\"Labelled anatomy of an air hose showing inner tube, textile reinforcement braid, outer cover and crimped fittings\" class=\"wp-image-6030\" srcset=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg 800w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings-300x225.jpg 300w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings-768x576.jpg 768w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings-16x12.jpg 16w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings-600x450.jpg 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p>Figure 1. Air hose anatomy: tube, reinforcement, cover, and crimped end fittings.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"5-air-hose-types-by-construction-and-handling\">5. Air Hose Types by Construction and Handling<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Straight hose<\/strong> \u2014 flat-stored, any length, largest bore. The default.<\/li>\n\n\n\n<li><strong>Coiled (recoil) hose<\/strong> \u2014 heat-set into a helix so it self-retracts; typically 1\/4-inch bore, 150\u2013200 PSI. Best for fixed bench and bay work. Compared in air hose vs coiled air hose.<\/li>\n\n\n\n<li><strong>Braided hose<\/strong> \u2014 textile or wire braid reinforcement. Braid geometry and material are separate questions from tube material; see our braided hose guide and benefits of braided hoses.<\/li>\n\n\n\n<li><strong>Spiral-reinforced hose<\/strong> \u2014 higher pressure and better impulse life than braid, at a larger bend radius.<\/li>\n\n\n\n<li><strong>Delivery vs suction hose<\/strong> \u2014 delivery hose carries pressurised air on the inside; suction hose is reinforced to resist collapse when the air is drawn through it. The distinction is explained in our delivery vs suction hose guide.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"6-temperature-and-environment\">6. Temperature and Environment<\/h2>\n\n\n\n<p>If you work outside all winter, temperature decides material more than any other single factor. Below 25\u00b0F, PVC is out. Below -20\u00b0F, hybrid leaves the table. Choose PU from -20\u00b0F down to -40\u00b0F, or rubber in that same range. Below -40\u00b0F no standard compound applies \u2014 ask the factory to confirm a special low-temperature compound. Above 140\u00b0F, textile reinforcement becomes the limiting layer and compound selection matters more than nominal material.<\/p>\n\n\n\n<p>Environment adds four more criteria: <strong>abrasion<\/strong> (cover thickness and hardness), <strong>oil<\/strong> (tube compound, not cover), <strong>UV<\/strong> (carbon-black-filled black compounds outlast bright colours), and <strong>cleanliness<\/strong> (food and pharmaceutical areas need washdown-rated compounds and smooth bores). Our best air hose for cold weather covers the low-temperature end in detail.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"7-applications-matching-hose-to-tool\">7. Applications: Matching Hose to Tool<\/h2>\n\n\n\n<p>Table 2. Typical air hose specification by application.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th scope=\"col\">Demande<\/th><th scope=\"col\">Bore<\/th><th scope=\"col\">Mat\u00e9riau<\/th><th scope=\"col\">Remarques<\/th><\/tr><\/thead><tbody><tr><td>Blow gun, bench cleaning<\/td><td>1\/4 pouce<\/td><td>PVC, hybrid, or PU coil<\/td><td>Lowest demand; coil works well<\/td><\/tr><tr><td>Nail guns, staplers<\/td><td>1\/4\u20133\/8 in<\/td><td>Hybrid or PU<\/td><td>Intermittent, high peak demand<\/td><\/tr><tr><td>Impact wrench, 1\/2 in drive<\/td><td>3\/8 in minimum<\/td><td>Hybrid or rubber<\/td><td>Starved by 1\/4-inch coils<\/td><\/tr><tr><td>Spray painting<\/td><td>3\/8 pouces<\/td><td>Rubber<\/td><td>Continuous flow at constant pressure<\/td><\/tr><tr><td>Sandblasting<\/td><td>1\/2 pouce<\/td><td>Rubber, abrasion-grade cover<\/td><td>Very high demand, harsh environment<\/td><\/tr><tr><td>Tyre bay inflation<\/td><td>1\/4 in coil<\/td><td>PU<\/td><td>Short reach, repetitive<\/td><\/tr><tr><td>Air motor, continuous duty<\/td><td>3\/8\u20131\/2 in<\/td><td>Rubber or hybrid<\/td><td>Sized from the motor&#8217;s air consumption \u2014 see our air motor hose guide<\/td><\/tr><tr><td>Construction site, outdoor<\/td><td>3\/8\u20131\/2 in<\/td><td>Rubber<\/td><td>UV, abrasion, rough handling<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Air-motor selection follows its own method because the motor runs continuously; the sizing arithmetic is in our guide to choosing an air hose for an air motor.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"8-maintenance-inspection-and-repair\">8. Maintenance, Inspection, and Repair<\/h2>\n\n\n\n<p>An air hose is a pressure component and should be inspected like one. Check five things monthly:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Cuts or bulges in the cover<\/strong> \u2014 a bulge means the reinforcement is compromised; replace, do not patch.<\/li>\n\n\n\n<li><strong>Fitting security<\/strong> \u2014 look for movement, corrosion, or seepage at the crimp.<\/li>\n\n\n\n<li><strong>Kinks held in shape<\/strong> \u2014 a hose that retains a kink has taken a permanent set at that point.<\/li>\n\n\n\n<li><strong>Stiffness compared to a new hose<\/strong> \u2014 the first sign of plasticizer loss in PVC and hybrid hose.<\/li>\n\n\n\n<li><strong>Leak points along the line<\/strong> \u2014 soapy water is still the fastest field test.<\/li>\n<\/ol>\n\n\n\n<p>Two rules make this routine effective. <strong>Any hose with a bulge in the cover comes out of service immediately<\/strong> \u2014 a bulge means the reinforcement has failed locally and the burst margin at that point is unknown. And <strong>any hose that retains a kink is retired<\/strong>, because a permanent set at a bend is where it will fail next.<\/p>\n\n\n\n<p>Two checks need a longer interval:<\/p>\n\n\n\n<p>Table 3. Air hose checks that run on a longer cycle than the monthly five.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th scope=\"col\">Interval<\/th><th scope=\"col\">What to check<\/th><th scope=\"col\">Action if it fails<\/th><\/tr><\/thead><tbody><tr><td>Quarterly<\/td><td>Bend-radius compliance of the installed route<\/td><td>Reroute or add support<\/td><\/tr><tr><td>Annually<\/td><td>Compare against a new hose of the same specification<\/td><td>Plan replacement if stiffness has increased noticeably<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Repair options are limited by construction: barbed low-pressure hose can be re-ended in the field, crimped high-pressure assemblies cannot. Our air hose leak repair guide covers diagnosis and safe repair limits.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"9-buying-and-sourcing\">9. Buying and Sourcing<\/h2>\n\n\n\n<p>For end users, the buying decision is the nine-decision sequence above. For distributors, retailers, and OEM buyers, it is a procurement question \u2014 specification sheets, price drivers, MOQ, lead time, test reports, and supplier audit. That side is covered in our air hose buyer&#8217;s guide.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"using-this-complete-guide-to-air-hoses-with-a-specification-sheet\">Using this complete guide to air hoses with a specification sheet<\/h3>\n\n\n\n<p>The sections above cover the nine decisions in the order they arise. If you are specifying a hose for someone else to buy, work through them in sequence and write down the answer to each one; that list is your specification sheet. A complete guide to air hoses is only useful if it ends in a written specification rather than an opinion.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"the-one-page-air-hose-decision-tree\">The One-Page Air Hose Decision Tree<\/h2>\n\n\n\n<p><strong>The nine decisions above collapse into six questions.<\/strong> Answer them in order and the specification writes itself.<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>What is the tool&#8217;s air demand?<\/strong> Low (blow gun, nailer) \u2192 1\/4 inch. Moderate (impact wrench, spray gun) \u2192 3\/8 inch. High (sandblaster, air motor) \u2192 1\/2 inch.<\/li>\n\n\n\n<li><strong>How far must the air travel?<\/strong> Over 25 feet rules out 1\/4 inch; over 50 feet at moderate flow points to 3\/8 inch or larger.<\/li>\n\n\n\n<li><strong>What temperature will the hose see?<\/strong> Above 25\u00b0F, any material. Below 25\u00b0F, hybrid or PU. Below -20\u00b0F, PU down to -40\u00b0F, or rubber. Below -40\u00b0F, confirm a special low-temperature compound with the factory.<\/li>\n\n\n\n<li><strong>What will it touch?<\/strong> Concrete and carts \u2192 rubber. Clean benches \u2192 PVC, hybrid, or PU.<\/li>\n\n\n\n<li><strong>Will it be oiled or in a lubricated circuit?<\/strong> Choose rubber for long-term oil exposure.<\/li>\n\n\n\n<li><strong>How will it be stored?<\/strong> Flat on a hook \u2192 straight hose. Fixed bench or bay \u2192 coil.<\/li>\n<\/ol>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" width=\"800\" height=\"600\" src=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-decision-tree-six-steps.jpg\" alt=\"Six-step decision tree for choosing an air hose by air demand, run length, temperature, contact surface, oil exposure and storage\" class=\"wp-image-6031\" srcset=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-decision-tree-six-steps.jpg 800w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-decision-tree-six-steps-300x225.jpg 300w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-decision-tree-six-steps-768x576.jpg 768w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-decision-tree-six-steps-16x12.jpg 16w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-decision-tree-six-steps-600x450.jpg 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p>Figure 3. The six decision-tree questions in order, each branching to a bore size, a material class and a storage style.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"what-the-standards-and-markings-on-an-air-hose-actually-mean\">What the Standards and Markings on an Air Hose Actually Mean<\/h2>\n\n\n\n<p>A complete guide to air hoses has to cover the markings, because they are the only specification most buyers ever see. Four items and two standard families cover almost everything printed on a hose cover.<\/p>\n\n\n\n<p>Table 4. Common air hose cover markings and their meaning.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th scope=\"col\">Marking<\/th><th scope=\"col\">Signification<\/th><th scope=\"col\">Why it matters<\/th><\/tr><\/thead><tbody><tr><td>Working pressure, e.g. &#8220;300 PSI&#8221; or &#8220;20 BAR&#8221;<\/td><td>Maximum operating pressure<\/td><td>The only pressure figure you may design to<\/td><\/tr><tr><td>Burst pressure<\/td><td>Pressure at which the hose fails<\/td><td>Confirms the safety factor; often omitted at retail<\/td><\/tr><tr><td>Inside diameter, e.g. &#8220;3\/8 in&#8221; or &#8220;10 mm&#8221;<\/td><td>Bore, not outside diameter<\/td><td>Sets airflow; the most common source of wrong purchases<\/td><\/tr><tr><td>Plage de temp\u00e9ratures<\/td><td>Usable limits in \u00b0C and \u00b0F<\/td><td>Exposes material class more reliably than any other marking<\/td><\/tr><tr><td>Reinforcement type<\/td><td>Textile braid, spiral, or wire layers<\/td><td>Sets the pressure class<\/td><\/tr><tr><td>Manufacturing standard<\/td><td>e.g. ISO 5774 (thermoplastic) or ISO 2398 (rubber)<\/td><td>Lets you verify the claim independently<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Read an air hose cover in this order: standard, working pressure, bore, temperature, then reinforcement. For an unprinted air hose, request the specification sheet and the test certificate: without cover printing there are no specified limits.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"troubleshooting-seven-symptoms-and-what-they-mean\">Troubleshooting: Seven Symptoms and What They Mean<\/h2>\n\n\n\n<p>Table 5. Common air hose symptoms, likely causes, and fixes.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th scope=\"col\">Symptom<\/th><th scope=\"col\">Most likely cause<\/th><th scope=\"col\">Fix<\/th><\/tr><\/thead><tbody><tr><td>Tool feels weak at the far end<\/td><td>Bore too small or run too long<\/td><td>Increase bore before increasing compressor size<\/td><\/tr><tr><td>Hose stiffens and cracks<\/td><td>Plasticizer loss in PVC or hybrid<\/td><td>Replace; switch material for the environment<\/td><\/tr><tr><td>Hose holding a kink after straightening<\/td><td>Permanent set at a bend, often from cold storage<\/td><td>Replace; store coiled loosely indoors<\/td><\/tr><tr><td>Leak at the fitting<\/td><td>Crimp damage or bend-radius violation<\/td><td>Replace the assembly; correct the routing<\/td><\/tr><tr><td>Bulge in the cover<\/td><td>Local reinforcement failure<\/td><td>Remove from service immediately<\/td><\/tr><tr><td>Coil stops retracting<\/td><td>Heat-set memory lost to heat or full extension<\/td><td>Replace; store coils relaxed and out of sun<\/td><\/tr><tr><td>Condensation and water at the tool<\/td><td>No water trap or separator in the line<\/td><td>Fit a separator and drain the receiver regularly<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Notice how many of those seven symptoms are installation or storage problems rather than manufacturing faults. That proportion is normal, and it is why a complete guide to air hoses spends as much time on routing, storage, and inspection as on material selection.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"where-to-go-next\">Where to Go Next<\/h2>\n\n\n\n<p>This complete guide to air hoses covers the nine decisions in summary. Each one has a dedicated page on this site with the tables, measurement methods, and worked examples:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Mat\u00e9riau<\/strong> \u2014 the PVC vs rubber vs hybrid air hose comparison and the PVC vs rubber air hose difference guide.<\/li>\n\n\n\n<li><strong>Size<\/strong> \u2014 the air hose size chart and what size air hose do I need.<\/li>\n\n\n\n<li><strong>Pression<\/strong> \u2014 the working pressure vs burst pressure guide.<\/li>\n\n\n\n<li><strong>Fittings<\/strong> \u2014 the air hose fittings and couplers guide.<\/li>\n\n\n\n<li><strong>Construction<\/strong> \u2014 the braided hose guide, air hose vs coiled air hose, and types of industrial hoses and how to choose the right one.<\/li>\n\n\n\n<li><strong>Applications<\/strong> \u2014 the air hose for air motor guide and best air hose for cold weather.<\/li>\n\n\n\n<li><strong>Repair<\/strong> \u2014 the air hose leak repair guide.<\/li>\n\n\n\n<li><strong>Sourcing<\/strong> \u2014 the air hose buyer&#8217;s guide.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"a-complete-guide-to-air-hoses-faqs\">A Complete Guide to Air Hoses: FAQs<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-is-the-best-air-hose\">What is the best air hose?<\/h3>\n\n\n\n<p>There is no single best air hose \u2014 the best hose is the one matched to your tool&#8217;s air demand, your run length, your working temperature, and how the hose is handled. A 3\/8-inch hybrid hose covers the widest range of general workshop use.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-size-air-hose-do-i-need\">What size air hose do I need?<\/h3>\n\n\n\n<p>Air hose sizes start with the tool&#8217;s air consumption, not the compressor&#8217;s size. Most light tools run on 1\/4 inch, impact wrenches and spray guns need 3\/8 inch, and high-flow tools need 1\/2 inch \u2014 and 1\/4 inch should not be used beyond about 25 feet.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-is-the-difference-between-a-working-pressure-and-a-burst-pressure-on-an-air-hose\">What is the difference between a working pressure and a burst pressure on an air hose?<\/h3>\n\n\n\n<p>Working pressure is the maximum pressure the hose may operate at. Burst pressure is where it fails, typically three to four times higher. The gap is a safety margin for stored energy, not an operating allowance.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"how-long-should-an-air-hose-last\">How long should an air hose last?<\/h3>\n\n\n\n<p>In daily shop use, roughly 1 to 2 years for PVC, 2 to 3 for hybrid, and 3 to 5 for rubber. In occasional home use, hoses age out rather than wear out, and storage conditions matter more than material.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"can-i-use-one-air-hose-for-every-tool-in-my-shop\">Can I use one air hose for every tool in my shop?<\/h3>\n\n\n\n<p>Yes, in most workshops, if you accept reduced performance on the hungriest tool. A 3\/8-inch hybrid hose is the best single compromise. If you run both a blow gun and a sandblaster, two hoses \u2014 1\/4 inch and 1\/2 inch \u2014 will outperform any one-size answer.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"about-henghua\">About HENGHUA<\/h2>\n\n\n\n<p>HENGHUA manufactures air hoses and reinforced hose assemblies for workshops, distributors, and OEM brands worldwide. The range covers PVC, hybrid, polyurethane, and rubber constructions from 1\/4 to 3\/4 inch, rated 200\u2013500 PSI, in straight, coiled, textile-braided, and spiral-reinforced styles, supplied with factory-crimped brass or steel fittings.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" width=\"800\" height=\"600\" src=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/henghua-air-hose-product-range-overview.jpg\" alt=\"HENGHUA air hose range including PVC, hybrid, polyurethane and rubber hoses with crimped fittings\" class=\"wp-image-6024\" srcset=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/henghua-air-hose-product-range-overview.jpg 800w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/henghua-air-hose-product-range-overview-300x225.jpg 300w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/henghua-air-hose-product-range-overview-768x576.jpg 768w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/henghua-air-hose-product-range-overview-16x12.jpg 16w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/henghua-air-hose-product-range-overview-600x450.jpg 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p>Figure 2. The HENGHUA air hose range in four materials \u2014 PVC, hybrid, PU and rubber \u2014 in straight and coiled form with crimped end fittings.<\/p>\n\n\n\n<p>Every HENGHUA air hose batch is pressure-tested before shipping, and custom lengths, colours, cover printing, packaging, and OEM\/ODM branding are available at factory-direct pricing. Tell us your tool, run length, temperature, and pressure \u2014 <a href=\"https:\/\/www.henghuahose.com\/fr\/contact\/\" target=\"_blank\" rel=\"noopener\">contact our engineering team<\/a> for a quote and samples.<\/p>\n\n\n\n<p><em>Written by the HENGHUA Engineering Team \u2014 the engineers who compound, build, and pressure-test the hoses we manufacture \u2014 with input from workshop users across the US and Europe. HENGHUA manufactures air hose assemblies from 1\/4 inch to 3\/4 inch, rated 200\u2013500 PSI, with custom lengths, fittings, and OEM branding available. <\/em><\/p>","protected":false},"excerpt":{"rendered":"<p>An air hose is a flexible reinforced line that carries compressed air from a compressor or an air-line outlet to a tool, a machine, or an air motor. Choosing one comes down to nine decisions \u2014 material, bore size, pressure rating, fittings, construction and handling, temperature, application, maintenance, and sourcing \u2014 and this page works [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":6030,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_surecart_dashboard_logo_width":"180px","_surecart_dashboard_show_logo":true,"_surecart_dashboard_navigation_orders":true,"_surecart_dashboard_navigation_invoices":true,"_surecart_dashboard_navigation_subscriptions":true,"_surecart_dashboard_navigation_downloads":true,"_surecart_dashboard_navigation_billing":true,"_surecart_dashboard_navigation_account":true,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[1],"tags":[737,2273,707,2274,2272,742],"class_list":["post-6042","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-air-hose-fittings","tag-air-hose-guide","tag-air-hose-sizes","tag-air-hose-types","tag-complete-guide-to-air-hoses","tag-what-is-an-air-hose"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v24.5 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Complete Guide to Air Hoses: Types, Sizes &amp; Specs | HENGHUA<\/title>\n<meta name=\"description\" content=\"The complete guide to air hoses: materials, bore sizes, pressure ratings, fittings, temperature limits and tool matching, plus a six-question decision tree.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.henghuahose.com\/fr\/complete-guide-to-air-hoses\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"A Complete Guide to Air Hoses\" \/>\n<meta property=\"og:description\" content=\"The complete guide to air hoses: materials, bore sizes, pressure ratings, fittings, temperature limits and tool matching, plus a six-question decision tree.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.henghuahose.com\/fr\/complete-guide-to-air-hoses\/\" \/>\n<meta property=\"og:site_name\" content=\"HENGHUA\" \/>\n<meta property=\"article:published_time\" content=\"2026-10-08T05:10:25+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-10-08T05:10:27+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"600\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"goodheart786@gmail.com\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t<meta name=\"twitter:data1\" content=\"goodheart786@gmail.com\" \/>\n\t<meta name=\"twitter:label2\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data2\" content=\"13 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"TechArticle\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/\"},\"author\":{\"name\":\"goodheart786@gmail.com\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/person\\\/28fdea90953f1958bdc26b600560c5c7\"},\"headline\":\"A Complete Guide to Air Hoses\",\"datePublished\":\"2026-10-08T05:10:25+00:00\",\"dateModified\":\"2026-10-08T05:10:27+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/\"},\"wordCount\":2634,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg\",\"keywords\":[\"air hose fittings\",\"air hose guide\",\"air hose sizes\",\"air hose types\",\"complete guide to air hoses\",\"what is an air hose\"],\"articleSection\":[\"Blog\"],\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/\",\"name\":\"Complete Guide to Air Hoses: Types, Sizes & Specs | HENGHUA\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg\",\"datePublished\":\"2026-10-08T05:10:25+00:00\",\"dateModified\":\"2026-10-08T05:10:27+00:00\",\"description\":\"The complete guide to air hoses: materials, bore sizes, pressure ratings, fittings, temperature limits and tool matching, plus a six-question decision tree.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg\",\"width\":800,\"height\":600,\"caption\":\"Labelled anatomy of an air hose showing inner tube, textile reinforcement braid, outer cover and crimped fittings\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/complete-guide-to-air-hoses\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"A Complete Guide to Air Hoses\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"name\":\"HENGHUA\",\"description\":\"Powering Your Industry, Worldwide.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"alternateName\":\"HENGHUA Hose\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.henghuahose.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\",\"name\":\"HENGHUA\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"width\":388,\"height\":90,\"caption\":\"HENGHUA\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/person\\\/28fdea90953f1958bdc26b600560c5c7\",\"name\":\"goodheart786@gmail.com\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g\",\"caption\":\"goodheart786@gmail.com\"},\"sameAs\":[\"https:\\\/\\\/henghuahose.com\"],\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/fr\\\/author\\\/goodheart786gmail-com\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Complete Guide to Air Hoses: Types, Sizes & Specs | HENGHUA","description":"The complete guide to air hoses: materials, bore sizes, pressure ratings, fittings, temperature limits and tool matching, plus a six-question decision tree.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.henghuahose.com\/fr\/complete-guide-to-air-hoses\/","og_locale":"fr_FR","og_type":"article","og_title":"A Complete Guide to Air Hoses","og_description":"The complete guide to air hoses: materials, bore sizes, pressure ratings, fittings, temperature limits and tool matching, plus a six-question decision tree.","og_url":"https:\/\/www.henghuahose.com\/fr\/complete-guide-to-air-hoses\/","og_site_name":"HENGHUA","article_published_time":"2026-10-08T05:10:25+00:00","article_modified_time":"2026-10-08T05:10:27+00:00","og_image":[{"width":800,"height":600,"url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg","type":"image\/jpeg"}],"author":"goodheart786@gmail.com","twitter_card":"summary_large_image","twitter_misc":{"\u00c9crit par":"goodheart786@gmail.com","Dur\u00e9e de lecture estim\u00e9e":"13 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"TechArticle","@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/#article","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/"},"author":{"name":"goodheart786@gmail.com","@id":"https:\/\/www.henghuahose.com\/#\/schema\/person\/28fdea90953f1958bdc26b600560c5c7"},"headline":"A Complete Guide to Air Hoses","datePublished":"2026-10-08T05:10:25+00:00","dateModified":"2026-10-08T05:10:27+00:00","mainEntityOfPage":{"@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/"},"wordCount":2634,"commentCount":0,"publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"image":{"@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg","keywords":["air hose fittings","air hose guide","air hose sizes","air hose types","complete guide to air hoses","what is an air hose"],"articleSection":["Blog"],"inLanguage":"fr-FR","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/","url":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/","name":"Complete Guide to Air Hoses: Types, Sizes & Specs | HENGHUA","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/#primaryimage"},"image":{"@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg","datePublished":"2026-10-08T05:10:25+00:00","dateModified":"2026-10-08T05:10:27+00:00","description":"The complete guide to air hoses: materials, bore sizes, pressure ratings, fittings, temperature limits and tool matching, plus a six-question decision tree.","breadcrumb":{"@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/#primaryimage","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/10\/air-hose-anatomy-tube-reinforcement-cover-fittings.jpg","width":800,"height":600,"caption":"Labelled anatomy of an air hose showing inner tube, textile reinforcement braid, outer cover and crimped fittings"},{"@type":"BreadcrumbList","@id":"https:\/\/www.henghuahose.com\/complete-guide-to-air-hoses\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.henghuahose.com\/"},{"@type":"ListItem","position":2,"name":"A Complete Guide to Air Hoses"}]},{"@type":"WebSite","@id":"https:\/\/www.henghuahose.com\/#website","url":"https:\/\/www.henghuahose.com\/","name":"HENGHUA","description":"Au service de votre secteur d'activit\u00e9, partout dans le monde.","publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"alternateName":"HENGHUA Hose","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.henghuahose.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/www.henghuahose.com\/#organization","name":"HENGHUA","url":"https:\/\/www.henghuahose.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","width":388,"height":90,"caption":"HENGHUA"},"image":{"@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.henghuahose.com\/#\/schema\/person\/28fdea90953f1958bdc26b600560c5c7","name":"goodheart786@gmail.com","image":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/secure.gravatar.com\/avatar\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g","caption":"goodheart786@gmail.com"},"sameAs":["https:\/\/henghuahose.com"],"url":"https:\/\/www.henghuahose.com\/fr\/author\/goodheart786gmail-com\/"}]}},"_links":{"self":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/posts\/6042","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/comments?post=6042"}],"version-history":[{"count":1,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/posts\/6042\/revisions"}],"predecessor-version":[{"id":6051,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/posts\/6042\/revisions\/6051"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/media\/6030"}],"wp:attachment":[{"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/media?parent=6042"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/categories?post=6042"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.henghuahose.com\/fr\/wp-json\/wp\/v2\/tags?post=6042"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}