{"id":4297,"date":"2026-09-04T05:49:27","date_gmt":"2026-09-04T05:49:27","guid":{"rendered":"https:\/\/www.henghuahose.com\/?post_type=product&#038;p=4297"},"modified":"2026-09-04T05:49:29","modified_gmt":"2026-09-04T05:49:29","slug":"20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings","status":"publish","type":"product","link":"https:\/\/www.henghuahose.com\/es\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/","title":{"rendered":"20141 45-Degree Elbow Metric Female Multiseal Hydraulic Hose Fittings"},"content":{"rendered":"<p><img fetchpriority=\"high\" decoding=\"async\" class=\"alignnone wp-image-4299 size-full\" src=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series-spec.jpg\" alt=\"45 degree elbow metric female multiseal hydraulic hose fitting 20141 series spec\" width=\"750\" height=\"779\" srcset=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series-spec.jpg 750w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series-spec-289x300.jpg 289w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series-spec-600x623.jpg 600w\" sizes=\"(max-width: 750px) 100vw, 750px\" \/><\/p>\n<p>Multiseal 45-degree female elbow fittings change the hose direction through a gentle 45 degrees at the connection point, easing the hose into the routing direction instead of forcing a hard corner. The 20141 series is the metric female multiseal version: a 45-degree swept elbow with a captive swivel nut whose seal is the spherical multiseal seat, covering 26 part numbers from M10x1 (DN5, -03) to M52x2 (DN40, -24) &#8211; including the small M10x1 bores &#8211; designed for wire-braided hose. If your layout needs a controlled change of direction where a 90-degree elbow is too sharp and a hose bend is too tight &#8211; or your drawing calls a metric female multiseal 45-degree elbow &#8211; this page covers dimensions, nut orientation, part numbers and OEM options.<\/p>\n<h2>Why Choose These 45-Degree Elbow Fittings<\/h2>\n<ul>\n<li><strong>A gentle change of direction.<\/strong>\u00a0A 45-degree elbow redirects the hose with the least disturbance to its natural run &#8211; where a 90-degree corner would overshoot the port axis and a forced bend would strain the hose.<\/li>\n<li><strong>Turn the corner in steel, not in the hose.<\/strong>\u00a0The elbow keeps the hose inside its minimum bend radius at the connection &#8211; longer hose life and cleaner routing.<\/li>\n<li><strong>The small sizes are covered.<\/strong>\u00a0The range starts at M10x1 (DN5) and includes DN5\/DN6 control lines often missing from competitor elbow programs.<\/li>\n<li><strong>Swivel nut for orientation.<\/strong>\u00a0The captive nut turns, so the elbow plane can be oriented toward the routing before the joint is torqued.<\/li>\n<li><strong>Multiseal spherical seat.<\/strong>\u00a0The female seal face is the spherical multiseal form, mating with the matching male end of the multiseal system with a small degree of self-alignment.<\/li>\n<li><strong>OEM-ready.<\/strong>\u00a0Laser marking, custom plating, material test reports and batch traceability.<\/li>\n<\/ul>\n<p><strong>Standards and traceability.<\/strong>\u00a0Threads are ISO 724 metric threads. The 45-degree elbow geometry and the spherical multiseal seat are machined per the series drawing. Fittings are designed to pair with wire-braided hose built to EN 853 1SN\/2SN or SAE 100 R1AT\/R2AT performance classes. Dimensional inspection reports and material test certificates are available for OEM gate checks.<\/p>\n<h2>Why Specify a 45-Degree Elbow?<\/h2>\n<p>Every hose has a minimum bend radius, printed on the cover. Route a hose tighter than that radius and the reinforcement strands work against each other on every pressure cycle &#8211; the classic cause of early hose failure at the bend.<\/p>\n<p>A 45-degree elbow moves a controlled part of the direction change into the steel fitting. It earns its place in three situations:<\/p>\n<ol>\n<li><strong>The port axis points between the routing directions.<\/strong>\u00a0Where a straight connection leaves the hose heading the wrong way, a 45-degree elbow corrects the angle with the least deviation from a straight run.<\/li>\n<li><strong>A 90-degree corner is too sharp for the envelope.<\/strong>\u00a0On short hose runs or where the hose must approach a fitting at a shallow angle, the 45-degree version keeps the bend gentle.<\/li>\n<li><strong>Two hoses run close together.<\/strong>\u00a0A 45-degree outlet can clear an adjacent line where a 90-degree outlet would collide with it.<\/li>\n<\/ol>\n<p>The 20141 female multiseal elbow adds one more practical point: the swivel nut means the elbow plane can be set to the routing direction and locked when the joint is torqued, without twisting the hose.<\/p>\n<h3>What does multiseal mean on this elbow?<\/h3>\n<p>The sheet describes the seal as \u7403\u9762 (spherical): the female end uses a spherical multiseal seat rather than a plain cone or flat face. The spherical form allows the male end to seat with a small degree of self-alignment, which is valuable on an elbow where the assembly geometry is less forgiving than a straight line. Confirm the matching male end type with us if you are replacing an existing elbow &#8211; a photo of the old male stud and nut is enough for a same-day answer.<\/p>\n<h3>What do the T, D and DT suffixes mean?<\/h3>\n<ul>\n<li><strong>T<\/strong>\u00a0marks the alternate nut retention construction shown on the drawing (rows ending in T). Rows without T use the standard construction.<\/li>\n<li><strong>D<\/strong>\u00a0marks a fine-pitch thread variant for the same nominal size, for example 20141-30-12D uses M30x1.5 where 20141-30-12 uses M30x2.<\/li>\n<li><strong>DT<\/strong>\u00a0combines the fine pitch and the T construction, for example 20141-27-10DT uses M27x1.5 where 20141-27-10T uses M27x2.<\/li>\n<\/ul>\n<p>Order the exact part number from your drawing or the old fitting &#8211; the pitch and the nut construction must both match the port.<\/p>\n<h3>45-degree vs 90-degree multiseal elbows<\/h3>\n<p>The catalog carries the metric female multiseal elbow in two angles: 20141 (this page, 45 degrees) and 20191 (90 degrees). They share the same spherical seat system and swivel nut, and the choice is purely a routing question &#8211; 45 degrees for a controlled change of direction, 90 degrees where the corner must be turned inside the fitting.<\/p>\n<h2>20141 Series Technical Specifications<\/h2>\n<h3>Materials and processing<\/h3>\n<ul>\n<li><strong>Body material options:<\/strong>\u00a0high-strength carbon steel (20#\/35#\/45# grades, cold-formed or machined) as standard; stainless steel 304 or 316L available for corrosive or wash-down environments.<\/li>\n<li><strong>Surface treatment:<\/strong>\u00a0zinc plating as standard; yellow, white or black zinc, zinc-nickel and Dacromet coating available for higher salt-spray requirements.<\/li>\n<li><strong>Heat treatment:<\/strong>\u00a0hardness and case depth are controlled per drawing so the elbow body, thread and spherical seat stay fatigue-resistant under impulse loads; typical surface hardness range HRC 20-28 (confirm the exact code on your drawing or PO).<\/li>\n<li><strong>Elbow geometry:<\/strong>\u00a0swept 45-degree bend, machined as one piece with the body so there is no joint at the corner.<\/li>\n<\/ul>\n<h3>Full dimension and part number table<\/h3>\n<p>All linear dimensions are in millimeters. E = thread, DN = hose bore, A and C = lengths per the supplier drawing, H = height from the hose-tail centerline to the sealing face per the drawing, S2 = swivel nut hex across flats. Rows ending in T use the alternate nut retention construction; D\/DT rows use the fine-pitch thread shown in the thread column.<\/p>\n<div>\n<div>\n<table>\n<thead>\n<tr>\n<th>Part Number<\/th>\n<th>Thread E<\/th>\n<th>Hose bore DN (mm)<\/th>\n<th>Dash size<\/th>\n<th>A (mm)<\/th>\n<th>C (mm)<\/th>\n<th>H (mm)<\/th>\n<th>S2 nut hex (mm)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>20141-10-03<\/td>\n<td>M10x1<\/td>\n<td>5<\/td>\n<td>-03<\/td>\n<td>41.1<\/td>\n<td>2.5<\/td>\n<td>20.7<\/td>\n<td>14<\/td>\n<\/tr>\n<tr>\n<td>20141-10-04<\/td>\n<td>M10x1<\/td>\n<td>6<\/td>\n<td>-04<\/td>\n<td>43.2<\/td>\n<td>2.5<\/td>\n<td>21.5<\/td>\n<td>14<\/td>\n<\/tr>\n<tr>\n<td>20141-12-03<\/td>\n<td>M12x1.5<\/td>\n<td>5<\/td>\n<td>-03<\/td>\n<td>40.9<\/td>\n<td>4.0<\/td>\n<td>21.2<\/td>\n<td>17<\/td>\n<\/tr>\n<tr>\n<td>20141-12-04<\/td>\n<td>M12x1.5<\/td>\n<td>6<\/td>\n<td>-04<\/td>\n<td>43.0<\/td>\n<td>4.0<\/td>\n<td>22.0<\/td>\n<td>17<\/td>\n<\/tr>\n<tr>\n<td>20141-14-04<\/td>\n<td>M14x1.5<\/td>\n<td>6<\/td>\n<td>-04<\/td>\n<td>43.4<\/td>\n<td>4.5<\/td>\n<td>21.3<\/td>\n<td>19<\/td>\n<\/tr>\n<tr>\n<td>20141-14-05<\/td>\n<td>M14x1.5<\/td>\n<td>8<\/td>\n<td>-05<\/td>\n<td>45.5<\/td>\n<td>4.5<\/td>\n<td>22.2<\/td>\n<td>19<\/td>\n<\/tr>\n<tr>\n<td>20141-16-04<\/td>\n<td>M16x1.5<\/td>\n<td>6<\/td>\n<td>-04<\/td>\n<td>43.7<\/td>\n<td>4.5<\/td>\n<td>21.4<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>20141-16-05<\/td>\n<td>M16x1.5<\/td>\n<td>8<\/td>\n<td>-05<\/td>\n<td>45.8<\/td>\n<td>4.5<\/td>\n<td>22.5<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>20141-16-06<\/td>\n<td>M16x1.5<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>47.4<\/td>\n<td>4.5<\/td>\n<td>24.1<\/td>\n<td>22<\/td>\n<\/tr>\n<tr>\n<td>20141-18-05T<\/td>\n<td>M18x1.5<\/td>\n<td>8<\/td>\n<td>-05<\/td>\n<td>46.8<\/td>\n<td>4.0<\/td>\n<td>22.6<\/td>\n<td>24<\/td>\n<\/tr>\n<tr>\n<td>20141-18-06<\/td>\n<td>M18x1.5<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>48.5<\/td>\n<td>4.0<\/td>\n<td>24.2<\/td>\n<td>24<\/td>\n<\/tr>\n<tr>\n<td>20141-18-08<\/td>\n<td>M18x1.5<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>52.2<\/td>\n<td>4.0<\/td>\n<td>25.7<\/td>\n<td>24<\/td>\n<\/tr>\n<tr>\n<td>20141-20-06T<\/td>\n<td>M20x1.5<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>48.2<\/td>\n<td>5.5<\/td>\n<td>23.9<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>20141-20-08<\/td>\n<td>M20x1.5<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>62.1<\/td>\n<td>5.5<\/td>\n<td>27.2<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>20141-22-06T<\/td>\n<td>M22x1.5<\/td>\n<td>10<\/td>\n<td>-06<\/td>\n<td>58.4<\/td>\n<td>5.0<\/td>\n<td>25.7<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>20141-22-08<\/td>\n<td>M22x1.5<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>62.1<\/td>\n<td>5.0<\/td>\n<td>27.2<\/td>\n<td>27<\/td>\n<\/tr>\n<tr>\n<td>20141-24-08T<\/td>\n<td>M24x1.5<\/td>\n<td>12<\/td>\n<td>-08<\/td>\n<td>61.1<\/td>\n<td>5.5<\/td>\n<td>26.1<\/td>\n<td>30<\/td>\n<\/tr>\n<tr>\n<td>20141-24-10<\/td>\n<td>M24x1.5<\/td>\n<td>16<\/td>\n<td>-10<\/td>\n<td>75.4<\/td>\n<td>5.0<\/td>\n<td>29.6<\/td>\n<td>30<\/td>\n<\/tr>\n<tr>\n<td>20141-27-10DT<\/td>\n<td>M27x1.5<\/td>\n<td>16<\/td>\n<td>-10<\/td>\n<td>74.4<\/td>\n<td>5.5<\/td>\n<td>29.6<\/td>\n<td>32<\/td>\n<\/tr>\n<tr>\n<td>20141-27-10T<\/td>\n<td>M27x2<\/td>\n<td>16<\/td>\n<td>-10<\/td>\n<td>74.4<\/td>\n<td>5.5<\/td>\n<td>29.6<\/td>\n<td>32<\/td>\n<\/tr>\n<tr>\n<td>20141-30-12D<\/td>\n<td>M30x1.5<\/td>\n<td>20<\/td>\n<td>-12<\/td>\n<td>80.9<\/td>\n<td>6.0<\/td>\n<td>33.5<\/td>\n<td>36<\/td>\n<\/tr>\n<tr>\n<td>20141-30-12<\/td>\n<td>M30x2<\/td>\n<td>20<\/td>\n<td>-12<\/td>\n<td>80.9<\/td>\n<td>6.0<\/td>\n<td>33.5<\/td>\n<td>36<\/td>\n<\/tr>\n<tr>\n<td>20141-36-14T<\/td>\n<td>M36x2<\/td>\n<td>22<\/td>\n<td>-14<\/td>\n<td>83.0<\/td>\n<td>7.0<\/td>\n<td>32.6<\/td>\n<td>41<\/td>\n<\/tr>\n<tr>\n<td>20141-39-16T<\/td>\n<td>M39x2<\/td>\n<td>25<\/td>\n<td>-16<\/td>\n<td>88.2<\/td>\n<td>7.0<\/td>\n<td>34.0<\/td>\n<td>46<\/td>\n<\/tr>\n<tr>\n<td>20141-45-20T<\/td>\n<td>M45x2<\/td>\n<td>32<\/td>\n<td>-20<\/td>\n<td>99.1<\/td>\n<td>8.5<\/td>\n<td>38.4<\/td>\n<td>55<\/td>\n<\/tr>\n<tr>\n<td>20141-52-24T<\/td>\n<td>M52x2<\/td>\n<td>40<\/td>\n<td>-24<\/td>\n<td>114.1<\/td>\n<td>9.0<\/td>\n<td>43.4<\/td>\n<td>60<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<p>Full dimensioned CAD drawings are available on request so your engineers can verify every length, the elbow height and the spherical seat before you commit a batch.<\/p>\n<h3>Working pressure: the honest answer engineers need<\/h3>\n<p>A crimp hose assembly fails at its weakest link, so the rating of a 20141 elbow depends on the hose you pair it with and the crimp quality. Wire-braided hydraulic hose in this size range typically operates between roughly 80 and 400 bar depending on bore size and construction (1SN or 2SN). Send us your hose specification and we will confirm the working pressure, burst margin and the recommended ferrule for your exact hose brand &#8211; the check is free and takes one message. For derating at elevated temperature, follow the hose manufacturer&#8217;s pressure-temperature curve, because the rubber cover and tube lose capacity above about +100\u00b0C.<\/p>\n<h2>Which Fitting Series Do You Need: 20141 (Braided) or 20142 (Spiral)?<\/h2>\n<p>The part number changes with the hose construction, because the barb geometry and the crimp parameters are different. For spiral-reinforced hose (4SP\/4SH style), order the 20142 series as 20142-XX-XX. Check the hose label before ordering: braided hose is marked 1SN, 2SN or R1AT, R2AT; spiral hose is marked 4SP, 4SH or similar.<\/p>\n<h2>Part Number Decoder and How to Order<\/h2>\n<p>The 20141 part number carries the specification &#8211; thread, pitch, bore, nut construction &#8211; so purchasing can copy it straight into a PO:<\/p>\n<p><strong>20141 &#8211; 30 &#8211; 12D<\/strong><\/p>\n<ul>\n<li><strong>20141<\/strong>\u00a0= 45-degree metric female multiseal elbow for braided hose<\/li>\n<li><strong>30<\/strong>\u00a0= thread nominal size (here M30, with the D suffix fixing the pitch at M30x1.5)<\/li>\n<li><strong>12<\/strong>\u00a0= hose dash size (here DN20, 3\/4-inch class bore)<\/li>\n<li><strong>T<\/strong>\u00a0(where present) = alternate nut retention construction<\/li>\n<li><strong>No suffix<\/strong>\u00a0= standard pitch for the row (here M30x2)<\/li>\n<\/ul>\n<p>Because one thread size can serve several hose bores and two pitches, always quote the full part number including any T, D or DT suffix. If you are replacing an existing elbow, send us a photo of the male stud, the old nut and the elbow body &#8211; we will confirm the matching part number, including the elbow angle, orientation and the correct pitch, the same day.<\/p>\n<h2>Assembly Guide: Four Steps with the 45-Degree Multiseal Elbow<\/h2>\n<p><strong>Step 1 &#8211; Cut the hose square.<\/strong>\u00a0Use a sharp hose cutter or cutoff saw. A square, clean cut lets the ferrule grip the cover evenly. A beveled or ragged cut is the most common cause of pull-out failures.<\/p>\n<p><strong>Step 2 &#8211; Prepare the insert depth.<\/strong>\u00a0Push the elbow tail into the hose until it bottoms firmly against the internal shoulder. The hose end must sit at the full insertion depth, not short, or the crimp zone will be wrong.<\/p>\n<p><strong>Step 3 &#8211; Lubricate and insert.<\/strong>\u00a0Apply a thin film of assembly lubricant to the hose bore and the barb. Push the elbow in with a steady twisting motion until it bottoms out, then wipe away excess lubricant. Keep the spherical multiseal seat clean and free of nicks.<\/p>\n<p><strong>Step 4 &#8211; Crimp, verify, orient and torque.<\/strong>\u00a0Crimp the matched ferrule with the hose manufacturer&#8217;s crimp specification and measure the crimp outside diameter against the crimp table. Then set the 45-degree outlet plane to the routing direction and torque the swivel nut onto the multiseal male stud &#8211; the nut turns freely, so the hose is never twisted to aim the elbow.<\/p>\n<h3>Warnings: three mistakes that cause leaks and blow-outs<\/h3>\n<ul>\n<li>Never substitute a 90-degree elbow where the drawing calls 45 degrees &#8211; the outlet geometry changes the whole routing.<\/li>\n<li>Never guess the pitch. A D or DT suffix means a fine-pitch thread (for example M30x1.5 instead of M30x2); forcing the wrong pitch damages both threads.<\/li>\n<li>Never put PTFE tape or sealant on the thread of the multiseal joint, and never let the swivel nut scratch the spherical seat during assembly.<\/li>\n<\/ul>\n<h2>Aplicaciones t\u00edpicas<\/h2>\n<p>45-degree multiseal female elbows suit layouts where the hose must change direction at a controlled angle:<\/p>\n<ul>\n<li>Machine tools, presses and injection molding machinery<\/li>\n<li>Hydraulic power units and valve stands with crowded plumbing<\/li>\n<li>Mobile equipment with compact hose runs between components<\/li>\n<li>Control and pilot lines in DN5-DN10 sizes<\/li>\n<li>Replacement service for machines with unreadable or obsolete elbow part numbers<\/li>\n<\/ul>\n<p>Wherever the routing asks for a gentle change of direction and the port carries the multiseal system, the 20141 series is the elbow to specify.<\/p>\n<h2>OEM Customization and Quality Traceability<\/h2>\n<p>For equipment builders and large maintenance programs, the 20141 series can be adapted to your exact drawing and your traceability rules.<\/p>\n<p><strong>Customization options<\/strong><\/p>\n<ul>\n<li><strong>Thread and geometry:<\/strong>\u00a0special threads, modified lengths, non-standard elbow angles and configurations machined to your drawing or to a sample.<\/li>\n<li><strong>Surface treatment:<\/strong>\u00a0zinc-nickel, Dacromet or other coatings for higher salt-spray grades; we confirm the achieved test hours for the coating you choose instead of quoting a generic number.<\/li>\n<li><strong>Laser marking:<\/strong>\u00a0your logo, part number and batch or date code laser-marked on the hex for full field traceability.<\/li>\n<li><strong>Material:<\/strong>\u00a0stainless steel 304\/316L versions for corrosive media or wash-down duty.<\/li>\n<li><strong>Nut construction:<\/strong>\u00a0standard, T or D\/DT variants per your drawing.<\/li>\n<li><strong>Packaging and kitting:<\/strong>\u00a0custom labels, barcodes, poly-bag or box quantities, and complete hose assembly kitting.<\/li>\n<\/ul>\n<p><strong>Quality documentation<\/strong><\/p>\n<ul>\n<li>Batch number traceability: every order carries a batch code that links back to the production records.<\/li>\n<li>Material test reports (MTR) available for carbon steel and stainless batches.<\/li>\n<li>Dimensional inspection reports for OEM gate checks.<\/li>\n<li>Third-party inspection (BV, SGS or similar) can be arranged before shipment.<\/li>\n<\/ul>\n<p><strong>Samples and MOQ.<\/strong>\u00a0Samples for stock sizes ship fast, and we keep low MOQs for standard part numbers so distributors can test the series without tying up capital. OEM programs can move to scheduled deliveries once the drawing is approved.<\/p>\n<h2>Packaging and Logistics<\/h2>\n<p>Standard export packing: elbows are individually poly-bagged or boxed to protect threads, seats and swivel nuts, then packed in export cartons labeled with part number, quantity and batch code. Custom labeling, kitting and barcode requirements are available. Exact carton quantity, gross weight and CBM are confirmed on the packing list for every order.<\/p>\n<h2>FAQ<\/h2>\n<p><strong>Q: What is a 45-degree metric female multiseal hydraulic hose elbow?<\/strong>\u00a0A: It is a crimp-style 45-degree swept elbow whose port end is a female metric thread with a captive swivel nut carrying the spherical multiseal seat &#8211; the gentle-angle version of the multiseal elbow system.<\/p>\n<p><strong>Q: When should I use a 45-degree elbow instead of 90 degrees?<\/strong>\u00a0A: When the port axis points between routing directions, a 90-degree corner is too sharp for the envelope, or two hoses must clear each other. The 45-degree elbow corrects the angle with the least disturbance to the hose run.<\/p>\n<p><strong>Q: What is the difference between 20141 and 20191?<\/strong>\u00a0A: 20141 is the 45-degree version and 20191 is the 90-degree version of the metric female multiseal elbow. Same seal system and swivel nut; choose by routing angle.<\/p>\n<p><strong>Q: What do the T, D and DT suffixes mean?<\/strong>\u00a0A: T marks the alternate nut retention construction; D marks a fine-pitch thread variant (for example M30x1.5 instead of M30x2); DT combines both. Quote the exact suffix from your drawing.<\/p>\n<p><strong>Q: Does this elbow cover small control-line sizes?<\/strong>\u00a0A: Yes &#8211; the range starts at M10x1 (DN5) and includes DN5\/DN6 control and pilot line sizes.<\/p>\n<p><strong>Q: Can the elbow be oriented after crimping?<\/strong>\u00a0A: Yes &#8211; the swivel nut turns freely, so the 45-degree outlet plane is set toward the routing when the nut is torqued, without twisting the hose.<\/p>\n<p><strong>Q: What is the difference between 20141 and 20142 series?<\/strong>\u00a0A: 20141 is for wire-braided hose (1SN\/2SN or R1AT\/R2AT) and 20142 is for spiral hose (4SP\/4SH style).<\/p>\n<p><strong>Q: What is the working pressure of these elbows?<\/strong>\u00a0A: The assembly rating depends on the hose and the crimp quality. Send your hose specification and we will confirm the working pressure for your combination.<\/p>\n<p><strong>Q: Can you make custom part numbers with my logo?<\/strong>\u00a0A: Yes. We offer laser marking, custom plating, stainless versions, special elbow angles and dimensions, with MTR and batch traceability for OEM programs.<\/p>\n<h2>Order Today: 45-Degree Multiseal Elbows with Confirmed Fit<\/h2>\n<p>Every 20141 metric female multiseal hydraulic hose elbow in this range is made to controlled dimensions, inspected before packing and backed by batch traceability. Send us a photo of the male stud, your hose type and thread size, and you will get a confirmed part number &#8211; including the elbow angle, pitch and nut construction &#8211; a delivery date and a quote within one working day. Request samples first and trial-fit one on your own layout: the gentle 45-degree outlet keeps the hose happy and the swivel nut makes the elbow as easy to aim as it is to route. We make sure the fitting, ferrule and hose work as one leak-free assembly.<\/p>","protected":false},"excerpt":{"rendered":"<p>Multiseal 45-degree female elbow fittings change the hose direction through a gentle 45 degrees at the connection point, easing the hose into the routing direction instead of forcing a hard corner. The 20141 series is the metric female multiseal version: a 45-degree swept elbow with a captive swivel nut whose seal is the spherical multiseal [&hellip;]<\/p>\n","protected":false},"featured_media":4298,"comment_status":"open","ping_status":"closed","template":"","meta":{"_surecart_dashboard_logo_width":"180px","_surecart_dashboard_show_logo":true,"_surecart_dashboard_navigation_orders":true,"_surecart_dashboard_navigation_invoices":true,"_surecart_dashboard_navigation_subscriptions":true,"_surecart_dashboard_navigation_downloads":true,"_surecart_dashboard_navigation_billing":true,"_surecart_dashboard_navigation_account":true,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[1053],"product_tag":[1166,1164,1165,1121,1167],"class_list":{"0":"post-4297","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-metric-hydraulic-fittings","7":"product_tag-20141-fittings","8":"product_tag-45-degree-multiseal-hydraulic-hose-elbow-fittings","9":"product_tag-45-degree-swivel-elbow","10":"product_tag-metric-female-multiseal-elbow","11":"product_tag-spherical-multiseal-fittings","12":"desktop-align-left","13":"tablet-align-left","14":"mobile-align-left","15":"ast-product-gallery-layout-horizontal-slider","16":"ast-product-gallery-with-no-image","17":"ast-product-tabs-layout-horizontal","19":"first","20":"instock","21":"shipping-taxable","22":"product-type-simple"},"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v24.5 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Multiseal 45-Degree Female Elbow Fittings 20141 | HENGHUA<\/title>\n<meta name=\"description\" content=\"45-degree metric female multiseal hydraulic hose elbow fittings: 20141 swivel elbows with spherical seat fit 1SN\/2SN braided hose DN5-DN40. MTR quotes.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.henghuahose.com\/es\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"20141 45-Degree Elbow Metric Female Multiseal Hydraulic Hose Fittings\" \/>\n<meta property=\"og:description\" content=\"45-degree metric female multiseal hydraulic hose elbow fittings: 20141 swivel elbows with spherical seat fit 1SN\/2SN braided hose DN5-DN40. MTR quotes.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.henghuahose.com\/es\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/\" \/>\n<meta property=\"og:site_name\" content=\"HENGHUA\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-04T05:49:29+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"800\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data1\" content=\"12 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\\\/\",\"name\":\"Multiseal 45-Degree Female Elbow Fittings 20141 | HENGHUA\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series.jpg\",\"datePublished\":\"2026-09-04T05:49:27+00:00\",\"dateModified\":\"2026-09-04T05:49:29+00:00\",\"description\":\"45-degree metric female multiseal hydraulic hose elbow fittings: 20141 swivel elbows with spherical seat fit 1SN\\\/2SN braided hose DN5-DN40. MTR quotes.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\\\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series.jpg\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series.jpg\",\"width\":800,\"height\":800,\"caption\":\"45 degree elbow metric female multiseal hydraulic hose fitting 20141 series\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/product\\\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Shop\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/shop\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"20141 45-Degree Elbow Metric Female Multiseal Hydraulic Hose Fittings\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"name\":\"HENGHUA\",\"description\":\"Powering Your Industry, Worldwide.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"alternateName\":\"HENGHUA Hose\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.henghuahose.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\",\"name\":\"HENGHUA\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"width\":388,\"height\":90,\"caption\":\"HENGHUA\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Multiseal 45-Degree Female Elbow Fittings 20141 | HENGHUA","description":"45-degree metric female multiseal hydraulic hose elbow fittings: 20141 swivel elbows with spherical seat fit 1SN\/2SN braided hose DN5-DN40. MTR quotes.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.henghuahose.com\/es\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/","og_locale":"es_ES","og_type":"article","og_title":"20141 45-Degree Elbow Metric Female Multiseal Hydraulic Hose Fittings","og_description":"45-degree metric female multiseal hydraulic hose elbow fittings: 20141 swivel elbows with spherical seat fit 1SN\/2SN braided hose DN5-DN40. MTR quotes.","og_url":"https:\/\/www.henghuahose.com\/es\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/","og_site_name":"HENGHUA","article_modified_time":"2026-09-04T05:49:29+00:00","og_image":[{"width":800,"height":800,"url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Tiempo de lectura":"12 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.henghuahose.com\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/","url":"https:\/\/www.henghuahose.com\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/","name":"Multiseal 45-Degree Female Elbow Fittings 20141 | HENGHUA","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.henghuahose.com\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/#primaryimage"},"image":{"@id":"https:\/\/www.henghuahose.com\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series.jpg","datePublished":"2026-09-04T05:49:27+00:00","dateModified":"2026-09-04T05:49:29+00:00","description":"45-degree metric female multiseal hydraulic hose elbow fittings: 20141 swivel elbows with spherical seat fit 1SN\/2SN braided hose DN5-DN40. MTR quotes.","breadcrumb":{"@id":"https:\/\/www.henghuahose.com\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.henghuahose.com\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/"]}]},{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/www.henghuahose.com\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/#primaryimage","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series.jpg","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/09\/45-degree-elbow-metric-female-multiseal-hydraulic-hose-fitting-20141-series.jpg","width":800,"height":800,"caption":"45 degree elbow metric female multiseal hydraulic hose fitting 20141 series"},{"@type":"BreadcrumbList","@id":"https:\/\/www.henghuahose.com\/product\/20141-45-degree-elbow-metric-female-multiseal-hydraulic-hose-fittings\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.henghuahose.com\/"},{"@type":"ListItem","position":2,"name":"Shop","item":"https:\/\/www.henghuahose.com\/shop\/"},{"@type":"ListItem","position":3,"name":"20141 45-Degree Elbow Metric Female Multiseal Hydraulic Hose Fittings"}]},{"@type":"WebSite","@id":"https:\/\/www.henghuahose.com\/#website","url":"https:\/\/www.henghuahose.com\/","name":"HENGHUA","description":"Impulsamos tu sector en todo el mundo.","publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"alternateName":"HENGHUA Hose","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.henghuahose.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/www.henghuahose.com\/#organization","name":"HENGHUA","url":"https:\/\/www.henghuahose.com\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","width":388,"height":90,"caption":"HENGHUA"},"image":{"@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/product\/4297","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/comments?post=4297"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/media\/4298"}],"wp:attachment":[{"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/media?parent=4297"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/product_brand?post=4297"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/product_cat?post=4297"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/product_tag?post=4297"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}