{"id":6989,"date":"2026-11-16T06:21:10","date_gmt":"2026-11-16T06:21:10","guid":{"rendered":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/"},"modified":"2026-11-16T07:06:18","modified_gmt":"2026-11-16T07:06:18","slug":"vapour-recovery-hose","status":"publish","type":"post","link":"https:\/\/www.henghuahose.com\/es\/vapour-recovery-hose\/","title":{"rendered":"Vapour Recovery Hose vs Liquid Transfer Hose: What Changes"},"content":{"rendered":"<p>A vapour recovery hose carries displaced vapour, not product, and that single fact changes almost every part of the specification. The bore is smaller, the pressure is lower, the permeation requirement is stricter and the static control is non-negotiable. Copying the liquid line is the most common and most expensive mistake in vapour service.<\/p>\n\n\n\n<p>This guide sets out what a vapour line actually sees, how the hose differs from the one beside it, and how to specify both lines without over-specifying either.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img fetchpriority=\"high\" decoding=\"async\" width=\"800\" height=\"600\" src=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero.jpg\" alt=\"Vapour recovery hose alongside a liquid loading hose on a tanker loading gantry\" class=\"wp-image-6973\" srcset=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero.jpg 800w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero-300x225.jpg 300w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero-768x576.jpg 768w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero-16x12.jpg 16w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero-600x450.jpg 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p>Figure 1. The thinner hose finishes higher up the arm than the liquid line beside it.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"what-makes-a-vapour-recovery-hose-different\">What Makes a Vapour Recovery Hose Different?<\/h2>\n\n\n\n<p>Four differences matter, and each one is a specification line rather than a detail.<\/p>\n\n\n\n<p>The medium is a mixture of vapour and air, saturated with hydrocarbon at the product temperature. It is flammable across a wide range and it is generated continuously while liquid enters a tank.<\/p>\n\n\n\n<p>The pressure is low. A vapour line runs close to atmospheric, with a small back pressure from the recovery unit. Its job is to move volume, not to hold pressure.<\/p>\n\n\n\n<p>The permeation demand is high, because any vapour that passes through the wall is both a loss and an exposure. A liner that is acceptable in liquid duty can be a complaint in vapour duty.<\/p>\n\n\n\n<p>And the static risk is higher than in the liquid line, because a vapour flow generates charge on the liner surface and the mixture above the liquid is the part that can ignite.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"which-type-suits-vapour-duty\">Which Type Suits Vapour Duty?<\/h2>\n\n\n\n<p>For a vapor recovery hose the useful reference is Type 1 of EN 13765:2018: a 4 bar maximum working pressure, a 0.5 bar vacuum rating, and a service window of \u221220 \u00b0C to +60 \u00b0C. A vapour recovery hose does not need 14 bar: the type exists because vapour duty never uses it, and a hose bought at 14 bar carries weight, money and stiffness the duty never uses.<\/p>\n\n\n\n<p>The relevant link is to the <a href=\"https:\/\/www.henghuahose.com\/es\/en-13765-composite-hose-types\/\" target=\"_blank\" rel=\"noopener\">type classification<\/a> rather than to a pressure table. Most vapour lines never see a fraction of 4 bar, and the useful part of the type is the acknowledgement that vapour duty exists as a category.<\/p>\n\n\n\n<p>Where a terminal loads heated product, check the temperature. Vapour leaves the tank at the product temperature, and a 60 \u00b0C ceiling can be reached on a warm day with a warm load.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"how-does-bore-differ-from-the-liquid-line\">How Does Bore Differ From the Liquid Line?<\/h2>\n\n\n\n<p>A vapour line hose usually runs one or two sizes below the liquid line. A 4 inch liquid hose pairs with a 2 inch vapour hose on many truck loading arms; a 3 inch liquid line pairs with 1.5 inch or 2 inch.<\/p>\n\n\n\n<p>The bore is set by the volume of displaced vapour, which is close to the liquid volume, and by the allowable back pressure at the recovery unit. Undersize the line and the tank pressurises during loading; oversize it and the hose becomes heavy and hard to handle for no gain.<\/p>\n\n\n\n<p>Two practical checks catch most bad sizing. Confirm the recovery unit&#8217;s allowable back pressure, and confirm the hose length and bend radius at the arm. A vapour hose that kinks at the arm connection behaves like a closed valve.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"why-is-static-control-non-negotiable\">Why Is Static Control Non-Negotiable?<\/h2>\n\n\n\n<p>Because the mixture in the line can ignite, and because the charge is generated by the flow itself.<\/p>\n\n\n\n<p>A vapour recovery hose should be part of a bonded system: conductive liner or helix, metal fittings, and a defined path to earth through the arm. The resistance measurement belongs in the installation record, not in a datasheet footnote.<\/p>\n\n\n\n<p>Three failures recur. A hose replaced without re-checking continuity. A gasket that isolates the two halves. And a repair that breaks the conductive path at the ferrule.<\/p>\n\n\n\n<p>None of these are visible. That is why the <a href=\"https:\/\/www.henghuahose.com\/es\/chemical-hose-marking-static-electrostatic-requirements\/\" target=\"_blank\" rel=\"noopener\">marking and static requirements<\/a> belong in the commissioning check rather than in a file, and why a vapour line hose is never bought on price alone.<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" width=\"800\" height=\"600\" src=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-loading-arm.jpg\" alt=\"A thick liquid hose and a thinner vapour hose hanging from the same loading arm, the thin hose held by a clamp\" class=\"wp-image-6974\" srcset=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-loading-arm.jpg 800w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-loading-arm-300x225.jpg 300w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-loading-arm-768x576.jpg 768w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-loading-arm-16x12.jpg 16w, https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-loading-arm-600x450.jpg 600w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p>Figure 2. A clamp takes the weight of the thin line, with the bonding cable running down beside it.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Attribute<\/th><th>Liquid line<\/th><th>Vapour line<\/th><\/tr><\/thead><tbody><tr><td>Medio<\/td><td>Product, liquid<\/td><td>Displaced vapour and air<\/td><\/tr><tr><td>Typical bore<\/td><td>3 to 4 inch<\/td><td>1.5 to 2 inch<\/td><\/tr><tr><td>Pressure<\/td><td>Pump pressure<\/td><td>Near atmospheric<\/td><\/tr><tr><td>Rating that matters<\/td><td>Presi\u00f3n de trabajo<\/td><td>Vacuum and temperature<\/td><\/tr><tr><td>Permeation<\/td><td>Cost and odour<\/td><td>Exposure and loss<\/td><\/tr><tr><td>Static risk<\/td><td>Moderado<\/td><td>Alto<\/td><\/tr><tr><td>Inspection focus<\/td><td>Wall and fittings<\/td><td>Condensate and continuity<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p><em>Table 1. The same arm, two different hoses. Reading down the columns explains why a vapour line cannot be copied from the liquid side.<\/em><\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"does-a-vapour-line-need-a-vacuum-rating\">Does a Vapour Line Need a Vacuum Rating?<\/h2>\n\n\n\n<p>Usually a light one. The line may be drained or purged, and a collapse would close the path while the liquid line continues to load.<\/p>\n\n\n\n<p>A composite build with an internal helix resists collapse as a matter of construction, which is one reason the multilayer design suits vapour duty. The rating still belongs on the datasheet: a hose that is fine at atmospheric pressure can flatten under a purge.<\/p>\n\n\n\n<p>Where the recovery unit pulls a slight vacuum to capture vapour, confirm the figure rather than assuming, as the type table only gives the standard value. A small negative pressure applied to a soft wall is how a vapour line silently closes.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"what-about-condensate\">What About Condensate?<\/h2>\n\n\n\n<p>Vapour cools as it travels, and the heaviest fractions condense. That condensate collects in low points, in the hose and in the recovery pipework.<\/p>\n\n\n\n<p>Two consequences follow. The hose should drain towards the recovery point, not away from it. And the line should be inspected for liquid holdup, because a pool of condensate in a vapour line is a slug that arrives at the unit on the next load.<\/p>\n\n\n\n<p>Condensate also attacks the liner differently from vapour. A hose that is fine on vapour can swell where liquid sits for weeks, which is why the drain arrangement is part of the specification rather than an installation detail.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"how-do-you-specify-both-lines-together\">How Do You Specify Both Lines Together?<\/h2>\n\n\n\n<p>Write the pair as one document, with two specification rows, and keep it beside the <a href=\"https:\/\/www.henghuahose.com\/es\/composite-hose-datasheet\/\" target=\"_blank\" rel=\"noopener\">datasheet<\/a> for the assembly. That forces the buyer to think about the interaction rather than ordering the vapour line as an afterthought.<\/p>\n\n\n\n<p>For the vapor recovery hose row, name the medium as vapour, the maximum temperature, the allowable back pressure, the required continuity and the permeation expectation. For the liquid row, the product, the pressure and the temperature.<\/p>\n\n\n\n<p>Then add the interface: the connection at the arm, the connection at the tank, and the bonding method across both. The interface is where most field problems originate, and it belongs in the order rather than in a commissioning note.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"where-does-stage-ii-fit\">Where Does Stage II Fit?<\/h2>\n\n\n\n<p>A Stage II recovery hose belongs to vehicle refuelling rather than bulk transfer. The <a href=\"https:\/\/www.henghuahose.com\/es\/tank-truck-composite-hose-loading\/\" target=\"_blank\" rel=\"noopener\">tank truck loading guide<\/a> covers the bulk side, and the duty is different again: frequent small volumes, a nozzle interface and a very high cycle count.<\/p>\n\n\n\n<p>That context explains why the fittings differ and why the hose is usually smaller and more flexible. The principle is the same: low pressure, high permeation sensitivity, and static control that cannot be allowed to degrade.<\/p>\n\n\n\n<p>For a terminal engineer, the useful takeaway is that vapour duty is a family rather than one hose. Bulk loading, rail unloading and refuelling each have their own constraints, and a hose specified for one should not be moved to another without a review. The vapour duties differ in more than size, and the difference shows up in where the hose wears rather than in what it carries.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Deber<\/th><th>Conexiones<\/th><th>Where the wear shows<\/th><th>What the inspection looks for<\/th><\/tr><\/thead><tbody><tr><td>Bulk truck loading<\/td><td>One or two per shift<\/td><td>Arm bond and the ferrule behind it<\/td><td>Continuity at the arm, taken installed<\/td><\/tr><tr><td>Rail unloading<\/td><td>One per car, then idle<\/td><td>Low bend under the rack<\/td><td>Condensate holdup<\/td><\/tr><tr><td>Vehicle refuelling (Stage II)<\/td><td>Hundreds per week<\/td><td>Nozzle interface and gasket<\/td><td>Gasket swell and nozzle wear<\/td><\/tr><tr><td>Storage tank breather<\/td><td>Continuous<\/td><td>Cover, from steady low flow<\/td><td>Blistering on the cover<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p><em>Table 2. Vapour duty by sector. The connection count and the wear point move together, which is why one hose rarely serves two sectors.<\/em><\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"what-should-the-purchase-order-say\">What Should the Purchase Order Say?<\/h2>\n\n\n\n<p>Six lines cover a vapour line properly.<\/p>\n\n\n\n<p>Medium and temperature. Bore and length, with the allowable back pressure. Liner and helix material, with continuity required. End fittings and gasket, with the bonding method. Marking and traceability. And the test record, including the continuity measurement.<\/p>\n\n\n\n<p>Add one line for the documentation of the pair: the liquid hose and the vapour hose should share an asset register entry, so a replacement is not made in isolation.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"what-happens-when-the-recovery-unit-stops\">What Happens When the Recovery Unit Stops?<\/h2>\n\n\n\n<p>A blocked or stopped recovery unit turns the vapour line into a closed branch on a pressurised system, and the hose becomes the weakest point in it.<\/p>\n\n\n\n<p>Three events follow in sequence. Tank pressure rises during loading, the liquid line sees increased back pressure, and the vapour connection takes the load it was never designed for. A vapour hose that is fine in normal duty can be pushed towards its 4 bar ceiling in minutes.<\/p>\n\n\n\n<p>The protection is a pressure or vacuum relief on the tank or the line, set below what the hose can take. That is a system design question, not a hose question, and it is the reason a vapour line should not be bought without knowing what protects it.<\/p>\n\n\n\n<p>If a terminal has no relief on the vapour branch, the hose specification should assume it might, and the smallest safe bore should still be sized for the worst case rather than the average load.<\/p>\n\n\n\n<p>For a vapor recovery hose supplied without that information, the honest specification is a Type 1 build with continuity and a stated maximum, and a note that the system needs relief. Anything more specific is a guess about someone else&#8217;s pipework.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"how-do-you-inspect-a-vapour-line\">How Do You Inspect a Vapour Line?<\/h2>\n\n\n\n<p>Inspection follows the medium rather than the pressure, so the checks differ from a liquid line.<\/p>\n\n\n\n<p>Look for condensate first, because liquid holdup changes what the liner sees. Look at the low point of the run, and at the hose if it sags between supports.<\/p>\n\n\n\n<p>Then check the cover for blistering, which indicates permeation rather than mechanical damage. A vapour line with a blistered cover is telling you the liner is passing more than expected.<\/p>\n\n\n\n<p>Then check continuity, with the hose installed and the arm earthed. A reading taken on a bench proves the hose, not the installation.<\/p>\n\n\n\n<p>Finally check the fittings for gasket swelling. A vapour line gasket sees the same hydrocarbon as the liquid side, and a swollen gasket is the quiet cause of a leak that appears at the flange rather than at the hose.<\/p>\n\n\n\n<p>Record all four and keep the record with the asset number. A vapour line inspection that is not recorded is a conversation, and conversations do not survive staff changes.<\/p>\n\n\n\n<p>The same discipline applies to the vapour line hose whether it serves a truck bay, a rail rack or a storage tank breather. The medium is the same and the failure modes repeat.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"what-does-a-vapour-line-cost-compared-with-the-liquid-line\">What Does a Vapour Line Cost Compared With the Liquid Line?<\/h2>\n\n\n\n<p>Less per metre and more in consequence. A vapour hose is smaller, lighter and uses less material, so the unit price is a fraction of the liquid line beside it.<\/p>\n\n\n\n<p>The cost that matters is the one attached to getting it wrong. A non-conductive vapour hose on a flammable duty is a hazard that no price saving justifies, and a hose with the wrong permeation behaviour is an odour complaint that takes weeks to trace.<\/p>\n\n\n\n<p>That asymmetry is why the vapour line should be specified by the same person who specifies the liquid line, in the same document. Bought separately and late, it becomes the cheapest item on the arm and the one nobody reviews.<\/p>\n\n\n\n<p>The same reasoning applies to spares. A plant with three vapour line hose spares in the store will replace quickly and correctly; one with none will borrow from another bay, and a borrowed hose is where continuity checks get skipped.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"faq\">Preguntas frecuentes<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"can-i-use-a-liquid-hose-as-a-vapour-recovery-hose\">Can I use a liquid hose as a vapour recovery hose?<\/h3>\n\n\n\n<p>Not safely. The bore, the permeation behaviour and the continuity requirement all differ, and a liquid hose may not be conductive through the liner. Where a plant has done it, the hose was a vapour hose used on liquid duty, not the reverse.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-bore-should-a-vapour-line-be\">What bore should a vapour line be?<\/h3>\n\n\n\n<p>Usually one or two sizes below the liquid line, set by the displaced volume and the recovery unit&#8217;s allowable back pressure. Confirm both rather than copying the arm drawing.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"does-a-vapour-hose-need-to-be-conductive\">Does a vapour hose need to be conductive?<\/h3>\n\n\n\n<p>Yes, where the vapour is flammable. Continuity is a system property, so the hose, the fittings and the earthing path all have to be checked together.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"is-a-vapour-line-pressure-rated\">Is a vapour line pressure-rated?<\/h3>\n\n\n\n<p>Only lightly. A vapour recovery hose runs near atmospheric, and the useful rating is the vacuum or purge condition rather than a pressure figure.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"why-does-my-vapour-hose-collect-liquid\">Why does my vapour hose collect liquid?<\/h3>\n\n\n\n<p>Because vapour cools and the heavy fractions condense. Route the line to drain towards the recovery point, and inspect for holdup rather than assuming the flow clears it.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"is-a-stage-ii-recovery-hose-built-differently\">Is a Stage II recovery hose built differently?<\/h3>\n\n\n\n<p>Yes. A Stage II recovery hose works at a nozzle interface with a very high cycle count, so it is smaller, lighter and built for repeated connection rather than long transfer. Stage I captures vapour during bulk loading; Stage II captures it during refuelling.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"how-often-should-continuity-be-checked\">How often should continuity be checked?<\/h3>\n\n\n\n<p>At installation, after any hose change and at each inspection interval. A continuity check that follows a replacement is the one most often skipped.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"about-henghua\">About HENGHUA<\/h2>\n\n\n\n<p>HENGHUA builds vapour recovery hose in the small bores these lines use, with conductive construction, PP or PTFE liners and camlock or flanged ends. We supply the liquid and vapour lines as a pair, with the bonding method stated for each.<\/p>\n\n\n\n<p>Send the arm arrangement, the product and the recovery unit&#8217;s back pressure, and we will set out both lines and the continuity check that goes with them.<\/p>","protected":false},"excerpt":{"rendered":"<p>A vapour recovery hose carries displaced vapour, not product, and that single fact changes almost every part of the specification. The bore is smaller, the pressure is lower, the permeation requirement is stricter and the static control is non-negotiable. Copying the liquid line is the most common and most expensive mistake in vapour service. This [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":6973,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_surecart_dashboard_logo_width":"180px","_surecart_dashboard_show_logo":true,"_surecart_dashboard_navigation_orders":true,"_surecart_dashboard_navigation_invoices":true,"_surecart_dashboard_navigation_subscriptions":true,"_surecart_dashboard_navigation_downloads":true,"_surecart_dashboard_navigation_saved":true,"_surecart_dashboard_navigation_billing":true,"_surecart_dashboard_navigation_account":true,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[1],"tags":[2850,1250,2849,2848],"class_list":["post-6989","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-stage-ii-recovery-hose","tag-vapor-recovery-hose","tag-vapour-line-hose","tag-vapour-recovery-hose"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v24.5 (Yoast SEO v28.1) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Vapour Recovery Hose vs Liquid Transfer Hose | HENGHUA<\/title>\n<meta name=\"description\" content=\"Vapour recovery hose differs from a liquid line in bore, pressure, permeation and static control. What changes, and how to specify the vapour side correctly.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.henghuahose.com\/es\/vapour-recovery-hose\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Vapour Recovery Hose vs Liquid Transfer Hose: What Changes\" \/>\n<meta property=\"og:description\" content=\"Vapour recovery hose differs from a liquid line in bore, pressure, permeation and static control. What changes, and how to specify the vapour side correctly.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.henghuahose.com\/es\/vapour-recovery-hose\/\" \/>\n<meta property=\"og:site_name\" content=\"HENGHUA\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T06:21:10+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-16T07:06:18+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"600\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"goodheart786@gmail.com\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"goodheart786@gmail.com\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"TechArticle\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/\"},\"author\":{\"name\":\"goodheart786@gmail.com\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/person\\\/28fdea90953f1958bdc26b600560c5c7\"},\"headline\":\"Vapour Recovery Hose vs Liquid Transfer Hose: What Changes\",\"datePublished\":\"2026-11-16T06:21:10+00:00\",\"dateModified\":\"2026-11-16T07:06:18+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/\"},\"wordCount\":2346,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/vapour-recovery-hose-hero.jpg\",\"keywords\":[\"stage ii recovery hose\",\"vapor recovery hose\",\"vapour line hose\",\"vapour recovery hose\"],\"articleSection\":[\"Blog\"],\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/\",\"name\":\"Vapour Recovery Hose vs Liquid Transfer Hose | HENGHUA\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/vapour-recovery-hose-hero.jpg\",\"datePublished\":\"2026-11-16T06:21:10+00:00\",\"dateModified\":\"2026-11-16T07:06:18+00:00\",\"description\":\"Vapour recovery hose differs from a liquid line in bore, pressure, permeation and static control. What changes, and how to specify the vapour side correctly.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/vapour-recovery-hose-hero.jpg\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/vapour-recovery-hose-hero.jpg\",\"width\":800,\"height\":600,\"caption\":\"Vapour recovery hose alongside a liquid loading hose on a tanker loading gantry\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/vapour-recovery-hose\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.henghuahose.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Vapour Recovery Hose vs Liquid Transfer Hose: What Changes\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#website\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"name\":\"HENGHUA\",\"description\":\"Powering Your Industry, Worldwide.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\"},\"alternateName\":\"HENGHUA Hose\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.henghuahose.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#organization\",\"name\":\"HENGHUA\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"contentUrl\":\"https:\\\/\\\/www.henghuahose.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/HENGHUA-Hose-Manufacturer-Logo.png\",\"width\":388,\"height\":90,\"caption\":\"HENGHUA\"},\"image\":{\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.henghuahose.com\\\/#\\\/schema\\\/person\\\/28fdea90953f1958bdc26b600560c5c7\",\"name\":\"goodheart786@gmail.com\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g\",\"caption\":\"goodheart786@gmail.com\"},\"sameAs\":[\"https:\\\/\\\/henghuahose.com\"],\"url\":\"https:\\\/\\\/www.henghuahose.com\\\/es\\\/author\\\/goodheart786gmail-com\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Vapour Recovery Hose vs Liquid Transfer Hose | HENGHUA","description":"Vapour recovery hose differs from a liquid line in bore, pressure, permeation and static control. What changes, and how to specify the vapour side correctly.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.henghuahose.com\/es\/vapour-recovery-hose\/","og_locale":"es_ES","og_type":"article","og_title":"Vapour Recovery Hose vs Liquid Transfer Hose: What Changes","og_description":"Vapour recovery hose differs from a liquid line in bore, pressure, permeation and static control. What changes, and how to specify the vapour side correctly.","og_url":"https:\/\/www.henghuahose.com\/es\/vapour-recovery-hose\/","og_site_name":"HENGHUA","article_published_time":"2026-11-16T06:21:10+00:00","article_modified_time":"2026-11-16T07:06:18+00:00","og_image":[{"width":800,"height":600,"url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero.jpg","type":"image\/jpeg"}],"author":"goodheart786@gmail.com","twitter_card":"summary_large_image","twitter_misc":{"Escrito por":"goodheart786@gmail.com","Tiempo de lectura":"11 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"TechArticle","@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/#article","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/"},"author":{"name":"goodheart786@gmail.com","@id":"https:\/\/www.henghuahose.com\/#\/schema\/person\/28fdea90953f1958bdc26b600560c5c7"},"headline":"Vapour Recovery Hose vs Liquid Transfer Hose: What Changes","datePublished":"2026-11-16T06:21:10+00:00","dateModified":"2026-11-16T07:06:18+00:00","mainEntityOfPage":{"@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/"},"wordCount":2346,"commentCount":0,"publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"image":{"@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero.jpg","keywords":["stage ii recovery hose","vapor recovery hose","vapour line hose","vapour recovery hose"],"articleSection":["Blog"],"inLanguage":"es","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.henghuahose.com\/vapour-recovery-hose\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/","url":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/","name":"Vapour Recovery Hose vs Liquid Transfer Hose | HENGHUA","isPartOf":{"@id":"https:\/\/www.henghuahose.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/#primaryimage"},"image":{"@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/#primaryimage"},"thumbnailUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero.jpg","datePublished":"2026-11-16T06:21:10+00:00","dateModified":"2026-11-16T07:06:18+00:00","description":"Vapour recovery hose differs from a liquid line in bore, pressure, permeation and static control. What changes, and how to specify the vapour side correctly.","breadcrumb":{"@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.henghuahose.com\/vapour-recovery-hose\/"]}]},{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/#primaryimage","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero.jpg","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/11\/vapour-recovery-hose-hero.jpg","width":800,"height":600,"caption":"Vapour recovery hose alongside a liquid loading hose on a tanker loading gantry"},{"@type":"BreadcrumbList","@id":"https:\/\/www.henghuahose.com\/vapour-recovery-hose\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.henghuahose.com\/"},{"@type":"ListItem","position":2,"name":"Vapour Recovery Hose vs Liquid Transfer Hose: What Changes"}]},{"@type":"WebSite","@id":"https:\/\/www.henghuahose.com\/#website","url":"https:\/\/www.henghuahose.com\/","name":"HENGHUA","description":"Impulsamos tu sector en todo el mundo.","publisher":{"@id":"https:\/\/www.henghuahose.com\/#organization"},"alternateName":"HENGHUA Hose","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.henghuahose.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/www.henghuahose.com\/#organization","name":"HENGHUA","url":"https:\/\/www.henghuahose.com\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","contentUrl":"https:\/\/www.henghuahose.com\/wp-content\/uploads\/2026\/05\/HENGHUA-Hose-Manufacturer-Logo.png","width":388,"height":90,"caption":"HENGHUA"},"image":{"@id":"https:\/\/www.henghuahose.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.henghuahose.com\/#\/schema\/person\/28fdea90953f1958bdc26b600560c5c7","name":"goodheart786@gmail.com","image":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/secure.gravatar.com\/avatar\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/e1786ba73a3780e524c9584c9578a9c8d9baa7e82407695918f6b784c79979bf?s=96&d=mm&r=g","caption":"goodheart786@gmail.com"},"sameAs":["https:\/\/henghuahose.com"],"url":"https:\/\/www.henghuahose.com\/es\/author\/goodheart786gmail-com\/"}]}},"_links":{"self":[{"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/posts\/6989","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/comments?post=6989"}],"version-history":[{"count":2,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/posts\/6989\/revisions"}],"predecessor-version":[{"id":7025,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/posts\/6989\/revisions\/7025"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/media\/6973"}],"wp:attachment":[{"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/media?parent=6989"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/categories?post=6989"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.henghuahose.com\/es\/wp-json\/wp\/v2\/tags?post=6989"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}